COMBUSTIBLE GAS DETECTORCOMBUSTIBLE GAS DETECTOR
COMBUSTIBLE GAS DETECTOR
COMBUSTIBLE GAS DETECTORCOMBUSTIBLE GAS DETECTOR
WITH GOOSENECKWITH GOOSENECK
WITH GOOSENECK
WITH GOOSENECKWITH GOOSENECK
93005
ASSEMBLY AND OPERATING INSTRUCTIONS
IMPORTANT
Perf ormance of this tool may
vary depending on variations
in battery power or other circumstances.
Harbor Freight Tools cannot be held responsible for
any damage, injury , fire, or
death caused by an inaccurate reading or a failure
to detect on the part of this
device.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www .harborfreight.com
Copyright© 2005 by Harbor Freight Tools®. All rights reserved. No por tion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor F reight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
metInoitpircseD
sesaGtegraT )GPL(sagenaporpdnasaglarutanelbitsubmoC
(secnatsmucriclamitporednu)
egnaRnoitceteD
tnemtsujdAytivitisneSlaidyratorkcalB
epyTrosneSeborpsagcitylataC
sleveLgninraW ;LEL%01wolleY:.deM;MPP005~0neerG:woL
LEL%001deR:hgiH
erutarepmeTgnitarepO)C°54otC°01-(F°311otF°41
emiTgnilpmaSsdnoces01
emiTpu-mraWsdnoces01
tuodaeRyalpsiDelacshpargrabnosDEL
gninraWoiduA enotycneuqerfrehgihstimenoitartnecnocrehgiH
seirettaB )latotCDV8.4(elbaegrahcer,V2.1,hM-iN-4
emiTegrahceRyrettaBsruoh8:emitgnitarepO;sruoh21
retpadArewoPAm002,CDV9otCAV011
hctiwSnO/ffO,redilS
thgieW.sbl55.1
)noilliMrepstraP(MPP005~0
;)sleveLevisolpxErewoL(LEL%001ot%01
Save This Manual
You will need the manual for the safety wa rnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. K eep
your invoice with this man ual. Write the invoice number on the inside of the front
cover. Keep the manual and inv oice in a safe and dry place for future reference .
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or
wet locations. Don’t expose to rain. Keep work area well lighted. Do not use
electrically powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must ne ver be allowed in the work area. Do not
let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
SKU 93005 For technical questions, please call 1-800-444-3353 Page 2
Loading...