LASER LEVELLASER LEVEL
®
Brought to You by Augusta Flint
LASER LEVEL
LASER LEVELLASER LEVEL
03192
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any
artwork contained herein may be reproduced in any shape or form without the express written consent
of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Specifications
Brought to You by Augusta Flint
ITEM
Level Dimensions
Vial Dimensions
Level Vial
Laser Pattern
Power Requirements
Net Weight
8-7/8”L x 1”~2-1/2”W x 3-3/8”H
1-1/2”L x 3/8” Diameter
1 x 0º Horizontal
1/4” Dot @ 40’
2 x AAA Batteries
.50 Lbs.
DESCRIPTION
Laser Radiation. Do not stare into beam.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this product, basic safety precautions should always
be followed to reduce the risk of personal injury and damage to equipment.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use this product in damp or wet
locations. Don’t expose to rain. Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. Store this product out of reach of children.
5. Use the right product for the job. Do not attempt to force a small product
or attachment to do the work of a larger industrial product. There are certain
applications for which this product was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this product
and do not use this product for a purpose for which it was not intended.
6. Use eye and ear protection. Always wear ANSI approved impact safety
goggles. Never shine the laser beam at people or animals; eye damage
could occur.
7. Maintain product with care. Inspect this product periodically and if any part
appears broken or damaged, have it repaired by an authorized technician.
8. Disconnect power. Remove batteries from this product when not in use.
Warning!! Do not stare into the laser beam. The radiation in the beam will
damage your eyes.
SKU 03192 Page 2
Loading...