C.E. Niehoff & Co. N3247 Installation

28/14 V and 28 V Applications
N3247 Regulator in 28/14 V applications:
N3247 Regulator
Installation Instructions
Connect as shown in Figure 1.
Boots (2)
(see Figure 2 for 28 V)
Locknut, #10-24;
torque to 2.3 Nm / 20 lb.in.
Washer
Regulator - AC terminal
2 places: #10-32 screw, lock washer, and washer;
torque to 3.4 Nm / 30 lb.in.
Boot
Vehicle
harness
Washer
Nut, 0.312-18 UNC-2B;
torque to 5.6 Nm / 50 lb.in.
FIGURE 1 – Installing N3247 in 28/14 V Applications
N3247 Regulator in 28V applications:
torque to 4 Nm / 35 lb.in.
Washer
Regulator - IGN terminal
Alternator connector
J1939 connector
0.250-28 screw and washer; torque to 8.5 Nm / 75 lb.in.
AC connector
Regulator - 14 V terminal
Connect as shown in Figure 2.
Boots (2)
(see Figure 1 for 28/14 V)
Locknut, #10-24;
torque to 2.3 Nm / 20 lb.in.
Washer
Regulator - AC terminal
2 places: #10-32 screw, lock washer, and washer;
torque to 3.4 Nm / 30 lb.in.
Washer
Nut, 0.312-18 UNC-2B;
torque to 5.6 Nm / 50 lb.in.
Washer
Regulator - IGN terminal
Alternator connector
J1939 connector
0.250-28 screw and washer; torque to 8.5 Nm / 75 lb.in.
AC connector
Regulator - 14 V terminal
—NOT USED in
28V applications
FIGURE 2 – Installing N3247 in 28 V Applications
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
Page 1 of 1
II0161A
Loading...