C.E. Niehoff & Co. CEN Alternator Eyebolt Installation

Eyebolt Installation

on CEN Alternator

Instructions

How to install eyebolt on CEN alternator:

CAUTION

1. Make sure nut is threaded on screw portion of
bolt up to the second or third thread for proper
installation.

If re-installing eyebolt, make sure nut is pres­ent and threads are clean and not damaged.

2. Install eyebolt in hole and tighten until nut
reaches shell with two or three threads exposed
above nut. Doing so will ensure screw portion
will fully engage shell and not interfere with
stator performance.

Eyebolt

T

Nut

T

Figure 1 — Eyebolt Installation

2 to 3 threads exposed above nut

}

C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline [phone]

Page 1 of 1

II0149A