CMB2 Cutting JAWS
OPERAtiOn & PARtS inStRuCtiOn MAnuAL
WARning
Read and understand this instruction before using
this cutting jaws.
A person who has not read and does not understand
all operating instructions is not qualified to operate
these jaws. Failure to read and understand safety
instructions may result in injury or death.
Electrical Shock Hazard: The tool is not insulated and
the jaws will conduct electricity. This product should
be used only by persons knowledgeable in the safe
use of these jaws and crimpers. Failure to observe
this warning could result in injury or death.
CAutiOn
12 I 097 U
Cutting CAPACitY:
- # 8 Copperweld.
- 4/0 Cu.
- 336 MCM Aluminium
- 477 MCM ACSR (Str. 26/7 )
• Inspect the jaws before each use. Do not use damaged jaws.
• Damaged jaws can break and cause injury or damage to the tool.
• Work in a clean, uncluttered area.
• Keep persons away from immediate work area.
• Use this cutting jaws for the manufacturer’s intended purpose only.
Wear eye protection. Metal chips can fly from blades
when cutting.
Do not cut short, free pieces of steel rods or ropes,
they may dangerously fly off; injury to the operator
and persons nearby may result.
OPERAtiOn:
1. Install the cutting jaw in the tool (see the tool operation manual).
2. Make sure the jaw is fully seated in the tool.
3. Position the tool over the wire to be cut (for ACSR we strongly suggest to wrap wire with electrical
or duct tape around the area to be cut).
Advance the ram until the jaw comes in contact with the wire.
4. Grip the tool firmly. Make sure that the cutting wire is supported so that it will not fall when the cut is
completed.
5. Complete the cut, retract the ram, and remove the tool.
6. Inspect the blades for cracks and make sure the jaw is seated properly before cutting again.
Do not attempt to sharpen or dress the cutting edge.
Code N° Item DESCRIPTION
2599946 1 CB-CMB2 BLADE SET (2 pcs) 1
6420028 2 BLADE STOP 2
6420036 3 BLADE STOP WITH POSITIONER 2
6520630 7 SPRING 1
6760085 8 Ø 3x12 ELASTIC PIN 2
6640099 9 NORD-LOCK NL4 WASHER 8
6900176 10 M4x10 HEX. HEAD SCREW 8
Qty
PARtS LiSt:
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: sales@cembre.co.uk
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: info@cembre.com
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: info@cembre.fr
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: info@cembre.es
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: cembre@cembre.no
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: info@cembre.de
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: Sales.US@cembreinc.com
www.cembreinc.com
www.cembre.com
Code N° Item DESCRIPTION
2599946 1 CB-CMB2 BLADE SET (2 pcs) 1
6420028 2 BLADE STOP 2
6420036 3 BLADE STOP WITH POSITIONER 2
6520630 7 SPRING 1
6760085 8 Ø 3x12 ELASTIC PIN 2
6640099 9 NORD-LOCK NL4 WASHER 8
6900176 10 M4x10 HEX. HEAD SCREW 8
Qty
Cembre Ltd.
Dunton Park
Kingsbury Road, Curdworth - Sutton Coldfield
West Midlands B76 9EB (Great Britain)
Tel.: 01675 470440 - Fax: 01675 470220
E-mail: sales@cembre.co.uk
www.cembre.co.uk
Cembre S.p.A.
Via Serenissima, 9
25135 Brescia (Italia)
Telefono: 030 36921
Telefax: 030 3365766
E-mail: info@cembre.com
www.cembre.it
Cembre S.a.r.l.
22 Avenue Ferdinand de Lesseps
91420 Morangis (France)
Tél.: 01 60 49 11 90 - Fax: 01 60 49 29 10
B.P. 37 - 91421 Morangis Cédex
E-mail: info@cembre.fr
www.cembre.fr
Cembre España S.L.
Calle Verano, 6 y 8 - P.I. Las Monjas
28850 Torrejón de Ardoz - Madrid (España)
Teléfono: 91 4852580
Telefax: 91 4852581
E-mail: info@cembre.es
www.cembre.es
Cembre AS
Fossnes Senter
N-3160 Stokke (Norway)
Phone: (47) 33361765
Telefax: (47) 33361766
E-mail: cembre@cembre.no
www.cembre.no
Cembre GmbH
Heidemannstraße 166
80939 München (Deutschland)
Telefon: 089/3580676
Telefax: 089/35806777
E-mail: info@cembre.de
www.cembre.de
Cembre Inc.
Raritan Center Business Park
181 Fieldcrest Avenue
Edison, New Jersey 08837 (USA)
Tel.: (732) 225-7415 - Fax: (732) 225-7414
E-mail: Sales.US@cembreinc.com
www.cembreinc.com
www.cembre.com
2
3
8
10
8
2
9
9
9
9
10
7
10
10
3
1
2
3
8
10
8
2
9
9
9
9
10
7
10
10
3
1
The guarantee is void if parts
used are not Cembre original
spares.
*
Blades P/N 1 can only be
*
used with jaws marked “N”.
*
Loading...