Wireless USB Print Server
Quick Installation Guide
Rev. 01 (February, 2003)
Q20030101
Printed In Taiwan
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
FCC Warning
This equipment has been tested and found to comply with the
regulations for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this user’s guide, may cause harmful interference to
radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will
be required to correct the interference at his own expense.
CE Mark Warning
This is a Class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be required
to take adequate measures.
Table of Content
Quick Installation Guide 1
Introduction 1
Unpacking 1
Port and LED Descriptions 2
Installing the Print Server 4
Installing and starting the PS Admin program 6
Installing PS Admin Program 6
Starting PS Admin Program 7
Configure Your Print Server 8
Choosing a Name for Your Print Server 8
Setting a Password for Your Print Server 9
Changing Print Server Port Settings 10
Setting up Workstation Printing 11
Windows 95/98/Me Client Workstation printing 11
Windows 2000/XP Client Workstation printing 12
Windows NT 4.0 Client Workstations Printing 13
Windows NT 3.51 Client Workstation Printing 14
Web Configuration of the Print Server 15
Appendix 16
Quick Installation Guide
Introduction
This Quick Installation Guide gives step-by-step instructions for setting up
the print servers. The model you have purchased may appear slightly
different from those shown in the illustrations. Examples in this manual are
based on print servers. For more detailed information about the print server,
its components, making network connections and technical specifications,
please refer to the User’s Guide included with your print server.
Unpacking
Carefully remove all items from the package. In addition to this Quick
Installation Guide, be certain that you have:
♦ One Wireless USB Print Server
♦ One AC Power adapter suitable for your country’s electric power
service
♦ One Wireless USB Print Server Installation CD-ROM
♦ This Quick Installation Guide
If any item is missing, or if you find any damage or mismatch, promptly
contact your dealer for assistance.
Port and LED Descriptions
This section describes the visible parts of the print server.
Front Panel
There are three green LED indicators on the front panel:
LEDs Description
PW
USB
LAN
WLAN
Steady light confirms that the Print Server is
powered on.
Steady blinking (briefly dark) is initiated when the
printer is printing, otherwise, it remains dark.
Steady light confirms that the print server has a
good connection to your network.
When it blinks (briefly dark), the print server is
receiving/ transmitting data from/to the network.
Steady light confirms that the print server has a
good connection to your wireless network.
When it blinks (briefly dark), the print server is
receiving/ transmitting data from/to the network.
Back Panel
Component Description
DC Power
Input
The DC power input connector is located on
the Print Server’s rear panel and is labeled DC
5V. Please note that the power supply
included in the package is correct for this
Wireless USB Print Server; substitution of
other equipment may void warranty.
Reset Button
1.) Press and release this button to reset the
print server.
2.) Press and hold this button for three seconds
(the USB LED on the front panel lights up)
and then release it, the print server will
resume the factory default settings.
USB Port
The USB port allows you connecting the print
server to a printer with USB connector.
Antenna
To accept/transmit the data from/to your
wireless network.
LAN
Connector
This LAN connector (RJ-45) provides the
printer server with connection to the network
through 10/100 TX Ethernet cabling.
Loading...