1.1 Phone Display
1. Introduction
Key
Function
Dial/ Answer
Key
Make or answer a call.
View call logs in standby mode.
Hang-Up
Press and hold to turn the phone on/off.
End a call or reject an incoming call.
Return to the idle mode.
Right Soft
Key
In idle mode, press to turn the torch on for about 5 seconds.
In idle mode, press and hold to turn the torch on all the time, press again and the torch
will turn off.
Return to the previous menu.
Left Soft Key
Access the menu in idle mode.
When keypad is locked, press Left Soft key and * key to unlock the keypad
We continuously strive to improve our products. Therefore, we reserve the right to revise this
user manual or withdraw it at any time without prior notice.
1.2 Key
2
OK
Enter the Main menu in idle mode.
Confirm a selection.
Numeric Key
Enter numbers, letters or characters.
Select a submenu item labeled with the corresponding number.
*
Press twice quickly to enter „+‟ to make an international call.
Press to switch input modes when entering text.
#
Press and hold to activate or deactivate the silent mode in idle mode.
Press and hold to enter the pause character (P) or the wait character (W) when
entering number. Press to enter a symbol when editing text.
Navigation Key
Within a menu, press Up, Down, Left or Right to scroll through menu options.
Icon
Description
Network - The left portion indicates whether your phone is already registered with a
Note: “Press” in this manual, means press the key and release; “press and hold” means to
press and hold the key for at least two seconds.
1.3 Icons & Symbols
3
network and the right portion indicates signal strength (from no signal to strongest
signal).
Battery - Indicates battery level with 3 battery level indicator bars. When charging, a
scrolling icon will be displayed. The more bars, the stronger the charge.
SMS - Indicates you have a new SMS.
Alert type is “Silent”.
Alert type is” vibration”
Alert type is “Ring”.
Missed call - Indicates there is a missed call.
Call Divert - Indicates that the call divert unconditional function is activated.
Lock - Indicates that the keypad is locked.
Earset is in use
Alarm - Indicates that the alarm clock is on.
2. Getting Started
2.1 Inserting the SIM Card
4
2.1.1 Remove the back cover and battery
2.1.2 Insert the SIM card
Make sure that the clipped corner of the SIM card is facing the correct direction (clipped corner at down
right) and the metallic contacts are facing downwards. Slide the SIM card into the card slot until it stops.
5
.
2.1.3 Install the battery and back cover
6
2.2 Turning on the Phone
To turn the phone on, press and hold the Hang-Up Key.
7
2.3 Charging the Battery
“2~9”
Press to input letters.
1
Press to input symbols.
0
Press to enter a space.
Navigation Key ▲/▼/◀/▶
Press to browse the last or next available word.
1. Make sure the battery is inserted. To charge the battery, plug in the charger connector at the
bottom of your phone (Charger port) and then plug the other end into an AC power socket.
2. The battery symbol indicates the charging status. During charging, the charge indicators will scroll.
When all the scroll bars are steady, the battery is fully charged.
3. Disconnect the charger from the phone.
4. Disconnect the charger from the AC power socket.
3. Text Entry
3.1 Input Method
During text editing, you can press the # Key to switch input modes or press the Left Soft Key [Options]
and select Input Method to select different input modes.
In any input mode, press the * Key to open the symbols input screen.
3.2 Predictive Text entry
8
Left Soft Key [Select]
Press to confirm the letter or word.
Right Soft Key [Clear]
Press to clear a letter, press and hold to clear all entries.
#
Press to switch the input modes.
*
Press to activate punctuation mode.
Example: How to enter the word " ERROR "
1. Press the # Key to switch to ES.
2. Press 3 7 7 6 7, “ERROR” appears..
3. Press the OK Key to confirm “ERROR”.
3.3 Multi-tap Input
Using this mode requires you to press a key as many times as the order of the letters listed on the key.
For example, to enter the word “casa” in basic text input mode “es”, press key 2 (ABC) three times,
press 2 (ABC) once, press key 7 (PQRS) four times, press key 2 (ABC) once.
3.4 Numeric Input
Press the # Key to select “123” then enter the numbers using the keypad.
4. Calling
4.1 Making a Call
9
1. In idle mode, enter the phone number.
2. Press the Dial Key to dial the number.
3. Press the Hang-up Key to end the call.
Note: During a call, press the Navigation Key Up/Down to adjust the volume.
4.1.1 Making an International Call
1. Press * twice quickly to enter "+" appears on the screen.
2. Enter the country code.
3. Enter the area code (normally without the 0 before it) followed by the phone number.
4. Press the Dial Key to call directly.
4.2 Answering a Call
Press the Answer Key to answer it.
Press the Hang-Up key to reject it.
5. Phonebook
5.1 Search Contact
1. Press Menu > Phonebook, you can enter first few letters of contact name directly.
10
2. Enter the contact name.
5.2 Add New Contact
To create a new SIM/phone contact:
1. Select Menu > Phonebook > Add new contact.
If you want to change the storage position, press the Left Soft Key [Options] and then select
Phonebook settings > Preferred storage to set the storage position.
2. Press the Options > Select > To SIM/To phone to edit the contact information.
3. Press the Options Key > Done to save the contact.
.
6. Messaging
6.1 Create Message
1. Select Menu > Messaging>Write message.
2. In content, you are able to add text message into your message.
3. After finished, press the Left Soft Key [Options] and select send to to go to the following
options:enter number,Add from Phonebook.
6.2 Broadcast Message
11
Loading...