Cello Traveller TV Instruction Book

Traveller TV

10
10

10
10

11
12

12
12

12
13

13

14

14

14

14

Channel Setting

Antenna....................................................................................................................................................................... 15

Auto Tuning.................................................................................................................................................................. 15

ATV Mannual Tuning.....................................................................................................................................................15

DTV Mannual Tuning.....................................................................................................................................................15

CADTV Mannual Tuning................................................................................................................................................15

Programme Edit.............................................................................................................................................................16

Signal Information..........................................................................................................................................................16

CI Information.................................................................................................................................................................16

Power-Off-No-Signal-Down............................................................................................................................................16

Guide{EPG-Electronic Program Guide}..........................................................................................................................16

Dish Setup......................................................................................................................................................................16

21

Picture menu...................................................................................................................................................................21

SOUND menu.................................................................................................................................................................22

Time menu......................................................................................................................................................................22

Setup menu.....................................................................................................................................................................22

LOCK menu.....................................................................................................................................................................22

24

24

25

25
25

25

26

26

29

29

29

30
31

29

The parts

TV set

Stand

Screws(supplied)

3 x ST4 x 12

Installation

Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.

Put the stand to the neck of the TV set as shown below.

Attach the stand with the supplied screws.

Screw size M4x16

Screws(supplied)

3 x ST4 x 12

Remote control instructions

FreeView

Picture
Sound
Channel
Feature
Setup

S aorView

FreeView

UK Sat

Switch to DVB-S mode*

S aorView

FreeView

DTV
ATV

AV
SCART
YPBPR

HDMI1
HDMI2
HDMI3

PC

MEDIA

DVD

WŽǁĞƌƐǁŝƚĐŚ

DVB-S2 USB

MINI
YPbPr

MINI
AV

POWER

SCART

VGA

HDMI

TV Aerial

PC
Audio in

Audio Out

Digital

POWER

SCART

VGA

HDMI

TV Aerial

PC
Audio in

Audio Out

Digital

DVB-S2 USB

MINI
YPbPr

MINI
AV

DVB-S2 USB

DVB-S2 USB

MINI
YPbPr

MINI
AV

MINI
YPbPr

MINI
AV

First Time Installation

Language < English >

Country < UK >

Energy Mode < Home Mode >

OK Auto Tuning

Use the Left/Right/Down keys to select your Language,
Country and Energy Model.

Tuning Setup

Tune Type < DTV+ATV >

Digital Type < DVB-C >

Scan Type <Network Scan >

Network ID < Auto >

Frequency < Auto >

Sysmbol Rate < Auto >

Sorting by LCN < Off >

MENU

Back OK Start

Channel Setting

Antenna

CHANNEL

Antenna >

Auto Tuning >

ATV Manual Tuning >

DTV Manual Tuning >

Programme Edit >

Schedule List >

Signal Information >

1.Press the Menu button on the remote control on your LED TV
to select the Channel menu.

2.Press the buttons to select the Antenna menu.Press OK
to select it.

3.Press the buttons to select DVB-T or DVB-C.

CHANNEL

CI Information >

5V antenna Power Off >

Auto Tuning

Tuning Setup

Country < UK >

Tune Type < DTV+ATV >

Digital Type < DVB-C >

Scan Type <Network Scan >

Network ID < Auto >

Frequency < Auto >

Sysmbol Rate < Auto >

Sorting by LCN < Off >

OK Start

In the Auto Tuning menu there are 3 options for you to select
from:Country,Tune Type and Sorting by LCN.

Press to select Country,Tune Type and Sorting by LCN.

MENU

Back

ATV Manual Tuning

ATV Manual Tuning

< - Current CH 1 +>

Colour System PAL

Sound System BG

Fine-Tune 48.25 MHz

AFC On

Search

You can manually tune ATV Manual Tuning in the CHANNEL Menu.

1.Current CH:Dispaly the current channel number,press the buttons
to choose the channel you wish to modify.

2.Colour System:Select the Colour System using the buttons.

3.Sound System:Select the Sound System using the buttons.

4.Fine Tune:In case of bad reception,you can press the buttons
to make fine adjustments to the tuning. After manual tuning is comple­te,please press the RED button to save any found channels.

5.AFC:Select the AFC using the buttons.

6.Search:Press the buttons to scan through the frequencies to
find new channels.

DTV Manual Tuning

DTV Manual Tuning

< - UHF CH 21 +>

If you select DTV+ATV,the first 50% of the processing is for ATV
tuning,while the second 50% represent DTV tuning.When ATV tun­ing,you can press MENU to Skip ATV tuning and start DTV tuning
or press EXIT to exit tuning.

Auto Tuning Status

TV : 2 Programme

DTV : 0 Programme

Radio : 0 Programme

Dats : 0 Programme

During the channel search apreview of the already-found channels
is displayed.

Unlike QUICKSTART the satellite search will search the whole satellite
for channels and will not be instant.

Also the channels will appear in the order on the satellite and not the
pre-set order.

Auto search replaces any previous searched channels with those of the
new search.To add an extra satellite if you have a suitable Dish/LNB/
Switch you must use the Dish Installation menu.

You can manually tune DTV Manual Tuning in the CHANNAL Menu.
Press the Left/Right arrow buttons to select the channel you wish to
tune,then press OK button to scan for the channel.

Programme Edit

Programme Edit

Use up/down keys to select program edit.Press OK or Rght button to
enter the menu.Use up/down buttons to navigate through the menu.

1.Delete:
Press the RED button to delete the highlighted channel,a red circle
will appear next to the channel name.

Press the RED button again to confirm delete.

Press the MENU to return to the main menu.

2.Move:
Press to select the channel,press yellow button to enter the move
mode,then press to move the channel location,press yellow button
again or press OK to confirm.

Power-Off-No-Signal-Down

If no valid input signal is detected,the TV set will toggle to standby
mode automatically after approx.10 minutes.

Auto-Power-Down

4 hours maximum after the last user interaction and/or the last
channel switching,the TV set will automatically toggle from On
to standby mode.Prior to this autonatic toggling,a message will
be displayed allowing you to extend the delay time for another
4 hours.

Guide{EPG-Electronic Program Guide}

Press the GUIDE button on the remote control to open the
Electronic Program Guide.EPG contains a 7-day programme
preview as long as the selected channel asupports this function.
If there is more information about a programme,press the
and buttons to scroll through the pages.Please note that
the maximum viewable number of characters is limited.

3.Skip:
Press to select the channel you wish to skip.

Press the BLUE button,a logo will appear next to the channel name
and the channel will be skipped when you scroll through the channels.

Press the BLUE button again on the highlighted channel to disable the
skip function.Press MENU to return to the main menu.

Signal Information

Only available in DTV mode,Signal Information includes:channel/
network/modulation/quality/strength.

CI Information

When insert CI Module,display CI Information.
Note:The following reception combinations are possible:ATV,DVB-C,
DVB-T channels is not possible.

5V antenna power

Press button to turn on or off.

Software Update{USB}

1.Download the software to the usb device,then insert the usb device
to the unit.

2.Press the Menu button to select the CHANNEL menu.

3.Press the buttons to select Software Update{USB} and then
press the OK button to update software.

4.when the updating is completed,the unit will be reset to standby mode.

PICTURE

PICTURE

Picture Mode < Standard >

Contrast 50

Brightness 50

Colour 50

Tint 50

Sharpness 50

Colour Temp < Normal >

Noise Reduction Medium

SCREEN >

:Choose from Warm,Personal ,Cold and Normal

Medium

SCREEN:(Only available in PC)Press the OK button to select main menu
to adjust the screen.

SOUND

Sound Mode < Standard >

Treble 50

Bass 50

Balance < 0 >

Auto Volume < On >

Surround Sound < Off >

SPDIF Mode Auto

SOUND

AD Switch >

Blue Tooth >

Clock: Press the up/down buttons to select the clock menu,then

press the OK button to set date and time.

Time Zone: When you select a Time Zone city,the TV time is set

by the time offset information based on Time Zone and GMT(Greenwich
Mean Time) which is received with the broadcast signal and the time
is set automatically by a digital signal.

Auto Standby: The unit automatically switch to standby mode 4 hours

after the last time the remote control was used.A reminder screen will pop
up and count down before the unit switches to standby mode.If you want
to operate the TV for a long period of time,turn off auto standby function
by selecting Never.

OSD Time: Press up/down buttons to select the display time of the on-

screen menu:5s /10s / 15s / 20s / 25s / 30s / Never and then press the
OK button to confirm.

Setup

SPDIF Mode:Select the SPDIF Mode for theTV from off,PCM,
Auto.

Blue Tooth

BlueTooth < On >

BlueTooth Pair >

BlueTooth Paired List >

BlueTooth Reset >

BlueTooth:Turn the BlueTooth On and Off.

BlueTooth Pair:Search the available BlueTooth nearby.

BlueTooth Paired List:List the Paired BlueTooth devices.

BlueTooth Reset:Reset the BlueTooth.

Time

TIME

SETUP

Language < English >

TT Language < West >

Audio Language >

Subtitle Language >

Hearing Impaired < Off >

Aspect Ratio Auto

PVR File System

Press up/down buttons to select Hearing Impaired

Hearing Impaired:

SETUP

First Time Installation >

Home Mode >

Reset >

Software Update(USB) >

DVD Setup >

and then press the Ok button to select On/Off and return to the previous
menu.

Aspect Ratio: Press up/down buttons to cycle among aspect ratio:

4:3 / 16:9 / Auto / Zoom1 / Zoom2 and then press the OK button to confirm.

Clock 02/Jan 07:26>

Time Zone < London GMT >

Sleep Timer < Off >

Auto Standby < 4H >

OSD Timer < 5S >

Home Mode: Allow you to select among:Max Performance mode,Home

mode and Max Economy mode.

Reset: Restores all settings to the factory defaults.

Software Update(USB): 1.Download the software to the usb device,then

insert the usb device to the unit.

2.Press the menu button to select the CHANNEL menu.

3.Press the left/right buttons to select Software Update(USB) and then press
the OK button to update software.

4.When the updating is completed,the unit will be reset to standby mode.

LOCK

System Lock < Off >

Set Password >

Channel Lock

Parental Guidance Off

Key Lock Off

Hotel Mode

Hotel Mode

Hotel Mode < On >

Source Lock >

Default Source < Off >

Default Prog 2 BBC TWO NI

Default Volume < 30 >

Max Volume < 100 >

Import Datebase >

Hotel Mode

Export Database >

Clear Lock >

Input Source

PC

HDMI

Ezcast

USB

26

SETUP

First Time Installation >

Home Mode >

Reset >

Software Update(USB) >

DVD Setup >

Wide

Wide

27

Wide

ENG

ENG

ENG

28

29

30

31

32

33

34

35

36

37

38

39