Cello TP1906D Instruction Manual

19”Wide screen LCD TV

with DVD

Model No.: TP1906D

LCD Screen

Although the LCD screen is made with high-precision technology and

99.99% or more of the pixels are effective, black dots may appear or

bright points of light (red, blue or green) may appear constantly on the

LCD screen. This is not a malfunction.

Unit and Accessories
Getting Started

Front View
Rear View

Remote Control Key Functions
Menu Operation

Basic TV operation
PICTURE menu options
SOUND menu options
TIMER menu options
FUNCTION menu options
SETUP menu options

DVD operation

3
4

4
5-6
7-8
9
9-10
11
12
12
13
14-15

16

DVD System Operation17-19

Disc care20

SimpleTroubleshooting
Techincal Specifications

21
22

1

2

Caution

Safety Information

caution

Caution

The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Correct disposal of this Product

This unit is a “CLASS 1” laser product. This product uses a visible laser
beam which could cause hazardous radiation exposure. Ensure the
recorder is operated as instructed. Do not remove any covers or look into
the DVD drawer opening whilst power is applied. Do NOT modify or adjust
any controls that may affect laser emissions. Should the appliance become
faulty consult a qualified technician.

This appliance complies with European Safety and Electrical
directives

“Correct Disposal of Product”
Produced after 13 August 2005. Waste electrical should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.

Safety Information

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.

Electrical safety

x The TV set should only be connected to a mains supply which matches that stated on

the label on the mains adaptor

x To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items, which may damage the leads, on them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the
aerial (if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in
wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

x Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture

- anything accidentally penetrates the ventilation slots

- the set doesn't work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside. You
may invalidate the warranty. Qualified personnel must only service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for a long period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

x Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around.

x Do NOT tap or shake the TV screen, you may damage the internal circuits. Take good

care of the remote control, do not drop.

x To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with dilute detergent.

Unit and Accessories

Power cable

Unit and Accessories

Warranty Card

Warranty Card

Quick Start Guide

Quick Start Guide

User’s Manual

User’s Manual

Getting Started

Getting Started

CH

VOL

Power

MENU

TV/AV

(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED Indicator: Press POWER to turn on and off,

Press to display the input source menu(see page 10).

Buttons for DVD operation

Please insert a 12cm disc
according to the silk

POWER

NEXT: Play the next track or chapter

PREV: Play the previous track or chapter

EJECT: Eject the disc

PLAY: Play the disc playing

PAUSE: Pause the disc playing

STOP: Stop the disc playing

LED Indicator

Indicator on(Red) Standby mode
Indicator on(Green) Power on mode

5

Getting Started

COAX

out

TV Signal

Output to
Audio amplifier

DVD

TOGGLE SWITCH:
Turn on the AC power.

6

Getting Started

REAR CONNECTIONS

THE TELEVISION MANUFACTURER RECOMMENDS THE USE OF AN
OUTDOOR AERIAL SUITABLE FOR RECEPTION OF DIGITAL BROADCASTS

Name Function Description

AC POWER IN

HDMI

VGA IN

VGA signal from computer output

Connect to the composite terminal of your DVD/VCR

COAX out

S-Video IN

Video IN

(AUDIO)L/R IN

PC Audio IN

Headphone

RF

Connect to power supply

SCART

Connect to the HDMI of your DVD or other equipment

Audio signal input for AV

S-Video signal input

Video signal input

PC audio input

Connect it to your headphone or other audio equipment

Connect to antenna or cable source

Output to Audio amplifier

10

10

75mm

7

Remote Control Key Functions

POWER OFF

Switch off the power supply.

STANDBY

Turn the TV on/standby.

Colour buttons: short cuts-follow the coloured links in
the text.

Blue Button: Nicam.
TEXT: Turn off/on the Teletext display.
SUBPAGE: Selects subpage, press again to cancel.
HOLD: Hold or carry on the current subpage.
REVEAL: Reveals any hidden text.
MENU: System setup menu.
QUICK START: To tune in your TV.

FAV: Means favorite, to display the favorite channel list

defined by you.

EXIT: Exit the OSD menu.
MUTE: Mutes the Audio.
DISPLAY: Display brief information concerning the

current channel you are viewing.
Cursor left/right/up/down: Cursor buttons used in
menus.

OK: CONFIRM BUTTON for menu.
VOL+/-: Adjust the volume.
PROG+/-: Scan through channels.

FUNCTION

Press to display the input source menu

.(see page 10)

POWER

OFF

FUNCTION STANDBY

PROGVOL

TEXT

HOLD

MENU EXIT

QUICK START MUTE

SUBPAGE

REVEAL

PICTURE SOUND TIMER ASPECT

DISPLAY

FAV

OK

+ +

123

456

789

0

-/--

SETUP

ZOOM SUBTITLES

8

SETUP: DVD setup menu

ZOOM: adjust picture size in DVD mode.

SUBTITLES: select DVD disc subtitle.

: DVD fast forward.

: DVD fast reverse

: DVD next chapter.

: DVD previous chapter.
: load/eject DVD disc.

: play/pause DVD program.

: stop DVD program.

0-9,-/--

Choose channel directly. Number buttons for DVD.

PICTURE: Select the picture mode.
SOUND: Select the sound mode.
Timer

Standby timer.

ASPECT

Press to change the display mode of the screen.

POWER

OFF

FUNCTION STANDBY

PROGVOL

TEXT

HOLD

MENU EXIT

QUICK START MUTE

SUBPAGE

REVEAL

PICTURE SOUND TIMER ASPECT

DISPLAY

FAV

OK

+ +

123

456

789

0

-/--

SETUP

ZOOM SUBTITLES

9

Menu Operation

NOTE: When you initially use the TV, you will see the “First Time Installation” menu as below:

You can select “Country” and “Language”(OSD
display language),
When you have selected, press

buttons to
select “OK”, and press OK button to start auto
search.

The TV will start searching from the lowest
frequency(You can press MENU to cancel
the auto search.). When it finds a station, it will
automatically store this in the first location and
move to the next. When Autosearch is complete,
the TV will display the first station found.
If you want to change the order of the programs, you could use the "Program Edit" function to change(see
page 15).

1. Press VOL+/- to adjust the volume.

2. If you want to switch the sound OFF, press the MUTE

3. You can cancel this function by pressing MUTE or VOL+ button.

Basic TV operation

First time installation

First Time Installation

Country

Language

Delete Analog Program

Analog Program Search

UK

English

OK

Cancel

Select

Adjust

1. Using the CH+/- on the front panel or PROG+/- on the remote control.

Press CH+/PROG+ to increase channel number.
Press CH-/PROG- to decrease channel number.

2. Using 0-9 digital buttons and -/-- button

Press -/-- button, then the screen will display “-”, press again it will become “- -”.
When it displays “-”, you should then press a unmber of 0-9 to play the channel you desired;
When it displays “- -”, you should then press two unmbers to play the channel you desired.

TURN ON LCD TV

TURN OFF LCD TV

1. Connect power supply cable to the mains power supply and turn on the power by using the “toggle
switch” at the back of the tv on the left hand side. The standby indicator on the front of the tv will light up
red.

2. Use the power button on the right hand side of your tv or the standby button on your remote control to
turn the tv on. The standby indicator will turn green.

1. Press the power button on the right hand side of your tv to enter standby mode. The standby indica­tor will turn red.

2. Press the Power Off button on the remote control to switch off from the power supply. The standby
indicator light will extinguish.

10

Press the MENU button to display the main menu.
Use

/ buttons to select menu, and press button to enter the menu.

PICTURE

Picture Mode

Contrast

Brightness

Color

Tint

Sharpness

Personal

50

50

50

0

Normal

Select

Enter

TIMER

Sleep Timer

OSD Timer

0 Min

30Sec

SOUND

Volume

Sound Mode

Bass

Treble

Balance

20

Music

60

52

50

SETUP

Country

Auto tuning

Manual tuning

Program Edit

UK

FUNCTION

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

English

Auto

On

You can dispaly the input source menu by pressing the FUNCTION
button on the remote control or on the the TV set, press

/ button

to select, and press OK button to confirm.

Select

Enter

Select

Enter

Select

Enter

Select

Enter

TV

SCART

CVBS

S-VIDEO

VGA

HDMI

DVD

11

1. Use ɼ/ɽ button to select what you want to
adjust in the Picture menu.

2. Press ɺ/ ɻbutton to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Picture Mode

Select the type of picture which best corresponds to your viewing requirements by selecting Picture Mode in
Picture menu. You may select the picture mode directly by pressing the PICTURE button on the remote
control.

Contrast

Adjust the contrast of the picture.

Brightness

Adjust the brightness of the picture.

Colour

Adjust the colour of the picture.

NOTE: This option is invalid in PC mode, and it will be shown in gray.

Tint

Adjust the tint of the picture(in NTSC mode).

Sharpness

Select sharpness mode of the picture.

Colour Temperature(in VGA mode)

Select an optimum color temperature mode to suit your eyes for viewing among Normal, Warm and Cold.

DNR

If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level
between Off, Low, Mid and High.

In this manual, the settings shown on the OSD (On Screen Display) may be different from those on
your TV. Those printed here are only an example to help demonstrate TV operation.

PICTURE menu options

PICTURE

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

Personal

50

50

50

0

Normal

Off

Normal

Select

Adjust

Colour temperature

DNR

Press the MENU button on the top of your tv or the MENU button on your remote control then use /
button to select the picture menu, press to enter the menu. (see picture below).

12

1. Use ɼ/ɽ button to select what you want to
adjust in the Sound menu.

2. Press ɺ/ ɻbutton to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

1. Use ɼ/ɽ button to select what you want to
adjust in the Timer menu.

2. Press ɺ/ ɻbutton to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Volume

Adjust the volume.

Sound Mode

Select the type of sound which best corresponds to your listening requirements by selecting Sound
Mode in Sound menu. You may select the picture mode directly by pressing the SOUND button on
the remote control.

Bass

Adjust the level of the lower-pitched sounds.

Treble

Adjust the level of the higher-pitched sounds.

Balance

Adjust the audio output between left and right speakers.

Sleep Timer

Select the sleep time to put the TV automatically into standby mode after a specified period of time.
The period of time for automatic switch off can be selected in steps 15, 30, 45, 60,
75, 90, 105, 120 and 0 Min(Off). You can also select the automatic sleep time by pressing the TIMER
button on the remote control repeatedly.

OSD Timer

You can select the time period for OSD display to remain on the screen such as: 5Sec, 10Sec, 15Sec,
20Sec, 25Sec and 30Sec

SOUND menu options

TIMER menu options

SOUND

Volume

Sound Mode

Bass

Treble

Balance

20

Music

60

50

50

TIMER

Sleep Timer

OSD Timer

0 Min

30Sec

Select

Adjust

Select

Adjust

NOTE: The Treble and Bass levels can only be adjusted when the sound setting personal is selected.

Press the MENU button on the top of your tv or the MENU button on your remote control then use /
button to select the sound menu, press to enter the menu. (see picture below).

Press the MENU button on the top of your tv or the MENU button on your remote control then use

/

button to select the Timer menu, press to enter the menu. (see picture below).

13

FUNCTION

Language

Video Size

Blue Screen

Child Lock

First Time Installation

Reset

English

Full Screen

On

1. Use / button to select what you want to
adjust in the Function menu.

2. Press

/ button to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Language

Select the language of the OSD menu.

Video Size

Select the screen display mode.
Note: The available aspect modes may differ from one input source to another.

Blue Screen

To turn on/off the function, when the function is turned on, the screen background will turn blue at very weak
or no signal condition.

Child Lock

Press

button to enter the Child Lock menu as below:
Child Lock: Turn on/off the child lock function.
Key Lock: This option allows you to lock the buttons on
the TV set, so that a child may not accidentally
change your viewing preferences.

Change PIN Code: Set pin code.

Old PIN Code: The default is no password, press
OK to confirm. If the Pin code has been changed you must
enter the present code.
New PIN Code: Enter the new password.
Enter Again: Enter the new password and press OK
to complete the change.

FUNCTION menu options

Select

Adjust

Child Lock

Child Lock

Key Lock

Change PIN Code

Off

Off

Select

Adjust

Change PIN Code

Old PIN Code

New PIN Code

Enter Again

Select

Delete Input Confirm

0 9OK

If you turn on the Child Lock function, and set the PIN
Code, you have to enter the program edit option in Menu Setup(page 14) to lock one or more channels.
If the Quick Start button is pressed you will also be prompted for the child lock password.
Note: If the pin code is changed and the number forgotten or lost, please call the helpline.

Reset

Press

button to reset the setup.

Delete Input Enter

0 9OK

PIN Code:

Press the MENU button on the top of your tv or the MENU button on your remote control then use /
button to select the Function menu, press to enter the menu. (see picture below) .

14

1. Use ɼ/ɽ(PROG+/-) button to select what you want to
adjust in the Setup menu.

2. Press ɺ/ ɻbutton to Adjust.

3. When you are satisfied with your adjustment, press

MENU button.

Country

This option allows you to select the country.

Auto Tuning

Press ɺbutton tostart auto tuning.

Note: Before you perform Auto Tuning, you must choose the country where you are by selecting
COUNTRY option.

Manual Tuning

Note: Before you perform Manual Tuning, you must choose the country where you are by selecting
Country option.

SETUP menu options

(used in TV source)

Manual Tuning

Program

Sound System

Colour System

Program Label

AFT

Manual Search

1

I

PAL

Off

471.43MHz

Select

Adjust

Input

SETUP

Country

Auto Tuning

Manual Tuning

Program Edit

UK

Select

Adjust

Auto tuning

Press OK key to start

Enter

Return

OK

MENU

Program: Select the current channel.
Sound System: Select a corresponding sound system.
Colour System: Select a corresponding colour system.
Program Label: Name the current channel, you can also rename the program which you have named.
Press ɺbutton to enter, and press ɺ/ ɻbutton to select the position, then press ɼ/ɽ(PROG+/-)
button or 0-9 button to enter the character, press OK button to confirm.
AFT: Due to weak signals or a wrong antenna configuration, some of the channels may not be turned
to the best reception condition. AFT function allows you to fine tune channel selected.
Manual Search: Press ɺ/ ɻbutton to search.

0-9

Manual Tuning in TV mode

Press the MENU button on the top of your tv or the MENU button on your remote control then use /
button to select the setup menu, press

to enter the menu. (see picture below).

15

Skip: Skip the channel, the channel will be skiped when you scan

the channels with PROG+/- button.

Use

/ (PROG+/-) button to select the channel, and press the

yellow button on the remote control to set, and there will be a

“X” on the channel, press the yellow button again to cancel.

Such as channel 1,3,4.

Lock: Lock the channel, you have to enter the code(PIN code in

Child Lock menu--Function menu) to view the channel.

Use

/ (PROG+/-) button to select the channel, and press the

blue button on the remote control to set, and there will be a

“ ” on the channel, press the blue button again to cancel.

Such as channel 5.

Move: Adjust the channel’s position.

Use

/ (PROG+/-) button to select the channel, press button

to pull out the channel label(as channel 3), and press

/
(PROG+/-) button to select the position you like, press button
to confirm.

Program Edit

Channel list

Flags

X

X

X

Skip Lock Move

1. BBC1

2. BBC2

3. ITV1

4. CH4

5. CH5

Favorite

Favorite: Set favorite channels.( You could use the FAV button

to view the favorite channels in TV source.)

Use

/ (PROG+/-) button to select the channel, and press

the green button on the remote control to set, and there

will be a “ ” on the channel, press the green button again

to cancel. Such as channel 2.

Channel list

Flags

X

X

X

Move Confirm

Menu Cancel

1. BBC1

2. BBC2

3. ITV1

4. CH4

5. CH5

16

DVD Operation

Press the Power button on the TV or the remote control, then press the FUNCTION button to select DVD
mode. If there is no disc in the DVD player the screen will show "NO DISC".

Place a disc

Insert a disc according to the silk.
Do not touch the playing surface.
Hold the disc around the outside with your fingers and place the disc into the slot. The player will
automatically draw the disc into the player.
To "Eject" the disc, press the " " button on the TV or the AUTO EJECT button on the remote control.

Play

The contents of each disc vary, as to how the disc was authored and what features are included. Some
discs start playing as soon as they have been read, some need "Play" selecting in the Menu. Different play
modes are offered, such as Menu Play, Sequence Play and other modes.

DVD Operation

Using the Display Feature

1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc discs.

2. Loading and playing DVDs (two pages)

- Press DISPLAY button once to show the first page:

- "Disc Type, Title * / * (the playing title / total titles), Chapter * / * (the playing chapter / total chapters),
Elapsed Time of the Disc".

- Press the button again to show the second page:

- "Language */* (the serial number of playing language / the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle /the amount of optional
subtitles) or Off, Angle * / * (the serial number of playing angle / the amount of optional angles) or Off".

- Press the button for the third time, the display menu fades out.

3. Loading and playing SVCD discs (two pages)

- Press Display button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".

- Press the button again to show the second page:

- "Language * / * (the serial number of playing language/ the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle / the amount of optional
subtitles) or Off".

- Press the button for the third time, the display menu fades out.

4. Loading and playing VCD

- Press Display button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".

- Press the button again, the display menu fades out.

5. Loading and playing CD, HD-CD, WMA, Digital Audio / JPEG discs

- Press Display button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, Repeat Mode, Elapsed Time of the
Playing Track".

- Press the button again, the display menu fades out.

Subtitles

1. Compatible with DVD, SVCD discs.

2. Press the Subtitle button on the remote once, and the subtitle info banner appears

3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles
on-screen. By default, subtitles are off. The info banner will display Subtitle Off.

4. To display subtitles, press the Subtitle button again. The default language with its responding serial
number will be displayed in the info banner and subtitles will be displayed in that language. There are
8 supported subtitles: Chinese, English, Japanese, French, Spanish, Portuguese, Germany and Latin.
With each consecutive press of the Subtitle button, the subtitle switches.
For example, "Language Icon: [1 English DTS 6CH] or [Off]" (the availability of the subtitles are
disc-dependent). To turn subtitles off, press the Subtitle button until Subtitle Off is displayed.

17

DVD System Operation

System operation will define the setting of the set; these definitions will be stored until you change them
again.

General Steps of Setup Menu

1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be shown as below.

2. Press the

ɼ/ɽbuttons to select the Icon of the desired section, e.g. “TV System" and press

ɺbutton to open that section.

3. Press

ɼ/ɽ to select the desired feature and again press ɺbutton to open that section.

4. Press

ɼ/ɽ to select the desired feature and then press "OK" to select the new setting.

5 To exit the menu, press "SETUP" or

ɽ to select EXIT SETUP and then press "OK"

When launching the setup routine, the pressing of the following buttons will turn off the setup menu,
while the choices that have been changed will be saved.

Menu specification

1. SYSTEM SETUP

The system setup options are illustrated below:

DVD System Operation

3. The player will then start to play the first track, of the selected directory.

4. To change directories use the direction buttons.

Zoom In the Video Image

1. Compatible with DVD, SVCD, VCD, JPEG discs.

2. The Zoom Function allows you to enlarge the video image.

3. Press Zoom repeatedly to activate the function and choose the required zoom factor: Zoom 1, Zoom 2,
Zoom 3, Zoom 4, Zoom 1 /2, Zoom 1 /3, Zoom 1/4, Zoom Off.

Digital Audio Disc

1. Compatible with Digital Audio discs

2. The player will search the disc directory automatically and display the contents on screen.

18

DVD System Operation

2. LANGUAGE SETUP

The language setup options are illustrated below:

- OSD LANGUAGE: The OSD will display in the language you choose.

- AUDIO LANG: If the disc you are playing has the language you choose, it will
output audio in that language.

- SUBTITLE LANG: If the disc you are playing has the language you require you may select this either in
the Menu or using the "SUBTITLE" button on the Remote control. You may also switch this OFF.

- MENU LANG: If the disc you are playing has the language you require you may
select this.

3. AUDIO SETUP

-Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output mode you prefer.
Press Enter to confirm; There are 3 optional audio output modes: SPDIF /OFF, SPDIF / RAW, and SPDIF/
PCM. SPDIF/ RAW is for amplifiers with a built in digital decoder. SPDIF/PCM is selected for amplifiers with
no built in digital decoder.

-TONE: Use the

ɼ/ɽbutton to move the scroll and adjust the tone.

RATING
The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the
family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.

TV SYSTEM
According to the Color system of your TV, select proper TV TYPE.
PASSWORD
The password option is initialized as locked. You cannot set the ratings limit or change the password.
To enable these features you must unlock the Password. The default password is "0000". Using the

ɼ/ɽ

button, move the highlight to "PASSWORD", press the ɺbutton and enter "0000". You will see the
padlock symbol open. You may now change the RATING or put in a new password number.
If the Lock symbol is BLUE you must press the

ɺbutton to enter the lock field, the lock symbol will change

to YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password
and keep safe.

19

DVD System Operation

4. DIGITAL SETUP

The video setup options are illustrated below:

- DYNAMIC RANGE: Use the

ɼ/ɽbutton to

move the scroll and adjust the dynamic range.

- DUAL MONO: Choose the mode of the audio output.

- There are four modes: STEREO, MONO L, MONO R,
MIX MONO.

20

Disc Care

About Disc Terms

Title

Generally, pictures or music compressed on a DVD are divided into several sections, "title".

Chapter

The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one
or more chapters and each of them is numbered for easy searching, but some discs may not have a
recording chapter.

Track

A segment of picture or music on a CD, Each track is numbered for searching.

Care of Disc

Video disc contains high-density compressed data that needs proper handling.

1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.

2. Do not bend or press the disc.

3. Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.

Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from center
toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will
permanently damage the disc surface.

Disc Care

Simple Troubleshooting

Simple Troubleshooting

SYMPTOM REMEDY

GENERAL

Dead. No LED Lit No power to the TV.

Check all connections to the TV.

Dead Led lit red Set still in standby.

Press either the Power button or the Standby
button on the Remote control.

No signal.

Blue screen.

Incorrect source
selected.

Press FUNCTION button to select correct
source.

Noisy, snowy,

ghosting picture

(TV)

Poor aerial signal.

If using an indoor aerial, try moving the

aerial. Check aerial connections.

Volum e set too low.

Check volume settings.

No sound

External leads not
connected "if used".

Check all external leads are connected.

DVD

Will not accept disc DVD not selected

Select DVD mode with FUNCTION button.

Disc placed incorrectly

Disc must have mirror side facing you if single
sided.

Screen shows "NO

DISC"

Disc damaged or dirty

Inspect disc. If damaged you must discard.
If dirty see "Disc care' page 20.

20.

Picture "Freezes"
or breaks up

Disc damaged or dirty.

See "Disc care" page

Certain disc functions

not working.

Disc may not

support required

feature.

Read disc information.

Turn sound "Mute" OFF.

Sound "Mute".

If the display or performance fails check the tv in accordance with the following instructions. If the
tv still fails to function correctly contact your dealer for assistance.



22

Techincal Specifications

Techincal Specifications

AC 100-240V 50/60Hz 60WPower Consumption

TV

TVSystem PAL/SECAM, BG/DK/I
Screen size 19"(diagonal)
Resolution 1440x900pixels (RGB)
Aerial input 75

(unbalanced)

Audio output power 2x3 W

Remote control

Type
Control distance
Control angle
Batteries
Dimensions
Weight

infrared
5m
30° (horizontal)
2 x 1.5 V, size AA
48 x 168 x24 mm
70 g (without battery)