Cello DCS-2195 User Manual

Download

Page 1

ce llo

Model: DCS-2195

21”(54cm) COLOR TELEVISION

WITH DVD PLAYER AND DVB-T

User Manual

Congratulations for purchasing this combined TV、 DVD player and DVB-T. To get the best use from it please read this manual carefully and retain for

future use

Page 2

CONTENTS

1 Warning and safety precautions………………………………………………………………………..………..3 2 Location of controls……………………………………………………………………………………..………...4 3 Television instauration connect antenna…………………………………………………………………..…...5

4 Remote Control Battery installation………………………………………………………..………...………....5

5 Remote control unit………………………………………………………………………….……..….……….....6

6 Operating your TV DVD and DVB-T

TV button operation 6-1 power/standby………………………………………………………………………………………….…..8 6-2 program up/down…………………………………………………………………………………………..8 6-3 Direct access tuning……………………………………………………………………………………….8

6-4 -/--…………………………………………………………………………………………………………....8

6-5 Volume control……………………………………………………………………………………………..7 6-6 TV/AV/DVB/DVD selection……………………………………………………………………………….8 6-7 mute…………………………………………………………………………………………………………9 6-8 recall………………………………………………………………………………………………………...9 6-9 p.p …………………………………………………………………………………………………………..8 6-10 sleep ………………………………………………………………………………………………………9

6-11 swap……………………………………………………………………………………………………….9 7 TV MENU 7-1 PICTURE MENU……………………………………………………………………………………..….….10 7-2 sound MENU………….…………………………………………………………………………..……….10 7-3 setup MENU…………………………………………………………………………………………….…10 7-4 program exchange MENU……………………………………………………………………..……….….11

7-5 tune MENU………………………………………………………………………………………….……....12

8 DVD BASIC OPERATIONS 8-1 preparations…………………………………………………………………………………………...…….13 8-2 open and close…………………………………………………..………………………………………….13 8-3 pause/step……………………….………………………………………………………………………..…13 8-4 stop playback. ………………………………………………………………………………………………13

8-5 previous and next…………………………………………………………………………………………...13

8-6 fast forward and fast reverse……………………………………………………………………………....14

8-7 subtitle…………..…………………………………………………………………………………………...14 8-8 repeat………………………………………………………………………………………………………...14 8-9 repeat A-B…………………………………………………………………………………………………...14 8-10 angle……………...………………………………………………………………………………………...14 8-11 DVD menu…………………………………………………………………………….…………………...14 8-12title/pbc………………………………………………………………………………….…………………..14 8-13 program….…………………………………………………………………………….…………………...14 8-14 search………………………………………………………………………………….…………………...14 8-15 slow play……………………………………………………………………………….…………………...14

8-16 audio……..…………………………………………………………………………….…………………...14 9 MP3 PLAYBACK………………………………………………………………………………………………...15 10 PLAYING KODAK PICTURE CD OR JPEG FILES……………..………………………………………….16 11 screen saver function………………………………...……………..………………………………………….16 12 DVD SYSTEM SETUP 1 general system setup………………………………………………………………………………………..17 2 audio setup…………………………………….……………………………………………………………..19

Page 3

3 dolby digital setup…………………………….……………………………………………………………..19 4 preference setup..…………………………….……………………………………………………………..20 13 play DISCS……………………………………………………………………………………………….……..22 14 DISC protection and DVD character…………………………………………………………………………23 15 DVB-T OPERATIONS 15-1 basic operations first time tuning……………………………………………………………………24 15-2 program information………………..……………………………………………………………………25

15-3 lists and interactive services………………..…………………………………………………………..26

15-4 advanced operations tuning the receiver

Automatic scan……………………………………………………………………………………………28

Manuals scan…………………………………….……………………………………………………….29

Full scan……………….………………………….……………………………………………………….30

15-5 language TV setup………………………………………………………………………………………..31

15-6 parental control…………………………………………………………………………………………….32

setting you PIN…………………………………………………………………………………………….32

setting censorship………………………………………………………………………………………...32

lock/unlock services………………………………………………………………………………………33

15-7 timer programming and recording……………………………………………………………………….34

15-8 upgrading your receiver…………………………………………………………………………………..35

15-9 technical information display……………………………………………………………………………..35 16 TROUBLES SHOOTING………………………………………………………………………………...….. 36 17 SPECIFICATIONS…………………………………………………………………………………….……….37

Page 4

1.Warning and Safety Instructions

 This appliance is designed to operate from a mains supply of 110 -250V AC 50 Hz. Do not attempt

to connect to alternative supplies.

 The mains plug is a standard UK 3 pin 5A plug. If this is damaged or removed  If the mains lead becomes damaged or cut you must take the player to a qualified service technician.  Do not place the mains lead where it may be tripped over or walked on.  Do not place this player near hot radiators or other sources of radiated heat.  When leaving the appliance for long periods disconnect from the mains supply.  Do not connect the appliance to other apparatus unless the supply is disconnected to all items.  Do not operate this appliance in locations where moisture and high humidity are present such as: -

Bathrooms, Kitchens, Near Swimming pools or other areas that may be wet or damp.

 Do not cover the appliance. Ventilation is necessary to keep the apparatus operating safely.  For your safety do NOT open the appliance. There are no user serviceable parts inside.  During thunderstorms, disconnect the TV from the mains outlet and the aerial if external. If leaving

the TV for long periods such as holidays, disconnect from the supply and aerial also.

 It is advisable NOT to leave the TV in Standby for long periods. It should be turned OFF if being left

for more than 2 hrs or over night.

 If the player fails to operate, consult the “Troubleshooting guide” on page 27  Changes or modifications by the user will invalidate your guarantee.

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the

ersons.

The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The crossed out “Wheelie bin” is intended to show that this appliance must not be placed with ordinary household waste. When this appliance has reached the end of its useful life. It must be disposed of in accordance with local by-laws. Consult your local waste disposal authority. (WEEE Directive)

CLASS 1 LASER PRODUCT DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

Page 5

2 LOCATIONS OF CONTROLS

Front panel

1 2 3 4 5 6 7 8 9 10 11 12

Rear Panel

SIDE AV INPUT

Front panel

1. Power indicator light;

2. Remote control sensor

3. Play/pause button;

4. Open/close button

5. TV/ AV /DVD button;

6. MENU button;

7. DVD door

8. Volume decrease button (V-);

9. Volume increase button (V+);

10. Channel decrease button (P-);

11. Channel increase button (P+);

12. Main power button;

REAR PANEL

13. SCART input (Video input and output RGB input);

ote:

Do not use the “SCART” input and the side AV

input at the same time, as picture quality is compromised.

14. TV 75 ohm aerial socket.

15. DVB-T VCR SCART.(The function is option.);

16. DVB-T RF output socket.

17. DVB-T RF input socket.

Video

AUDIO LEFT

AUDIO RIGHT

13 14

Page 6

3 Television Installation Connect antenna

4 Remote Control Battery installation

1 Press down the grip on the battery cover and slide rightwards(remove the batteries cover).

2 Insert two size AAA batteries matching

the +/-polarities of the battery.

3 Close the battery cover.

Notes:

 When the remote control will not be used for a long period of time or when the batteries are worn out,

remove the batteries to prevent the leakage.

 Do not throw the batteries into fire. Dispose of used batteries in the specified manner.  Do not drop, dampen or disassemble the remote control.

75 Ω coaxial cable

Antenna in jack

Input terminal of antenna

DVB-T

Input terminal of antenna

Page 7

5 Remote Control Unit

10 12

18 21

Page 8

ALL button explain

1. DVD tray open and close

2. P.P: Picture mode selection

3. SLEEP: Sleep time set;

4. POWER: Power / stand –by on/off;

5. MUTE: TV and AV DVD DVB mute button;

6. RECALL: recall OSD button;

7. 0-9: directly press 0-9 digital button;

8. -/--: Single/Double/Triple digit selection.;

9. TV/AV: TV AV1 and DVB selection;

10. PROG: DVD DVD Program display playback; PPR: DVB-T the following keys are for PPR only and do not function with this STB.

11. TV/DVD: among TV and DVD selection

12. V-: Volume decrease button;

13. P+: TV program increase button;

14. DISPALY: DVD Display DVD OSD; DVB-T: subtitle display subtitle menu if available.

15. V+: Volume increase button;

16. Menu: TV menu button;

17. AUDIO: DVD DVD audio button; TV/RAD: DVB-T switches between TV and RADIO

18. P-: TV program decrease button;

19. STOP: DVD play stopping button;

20. PAUSE/STEP: DVD pause and step button;

21. ENTER/PLAY: DVD OK and play button;

22. F.REV: DVD DVD Fast reverse, DVB-T: YELLOW for teletext and interactive services;

23. F.FWD:DVD : DVD Fast forward. DVB-T: BLUE for teletext and interactive services;

24. NEXT: DVD DVD Next Chapte DVB-T: GREEN for teletext and interactive services;

25. PREV: DVD DVD Previous Chapter DVB-T: RED for teletext and interactive services;

26. DVD menu: DVD menu button; DVB-T:DVB-T menu button;

27. UP: DVD and DVB-T selection up button

28. REPEAT-AB: DVD button; DVB-T: calls upon the information banner;

29. REPEAT: DVD button; DVB-T: enters teletext mode.

30. SLOW DVD DVD slowly play button; DVB-T: program increase button;

31. RIGHT: DVD and DVB-T right selection button:

32. LEFT: DVD and DVB-T left selection button

33. SETUP: DVD DVD SETUP button; DVB-T: confirms selection made;

34. ANGLE:DVD DVD ANGLE button; DVB-T: exits the menu button;

35. SEARCH: DVD DVD time chapter playback button DVB-T: program decrease button

36. DOWN: DVD and DVB-T selection down button

37. SWAP: TV program change.

38. SUBTITL: DVD DVD Subtitles On/Off; DVB-T: DISPLAY TV guide.

39. TITLE/PBC: DVD button

40. Zoom: DVD picture Zoom select

41. DVB-T SWITCH button, when press the button, all DVB-T buttons has affection.

Page 9

6 Operating your TV DVD AND DVB-T

TV BUTTON OPERATION 6-1 Power/Stand-By ON/OFF

STANDBY With the Power button on, you may turn the set on and off with the Remote

control. In the “Standby” mode you may also use the P+/P- buttons on the Remote control and the TV set. This TV has an automatic switch off, if no signal is received for 10 minutes.

Note: This does not apply in DVD or AV mode.

6-2 Program Up/Down

Push remote or front panel [P+] key,

,to change Program Up Push remote or front panel [P-] key,

to change Program Down.

6-3 Direct Access Tuning(remote control)

Direct Program Access. Using the numeric buttons

on the Remote Control, programmers may be directly. selected

6-4 Single/ Dual/ Triple digits Program number selection. -/-- (Remote control)

Single/ Dual/ Triple digit Program number selection. -/-- (Remote control). To select a

programmer number above (9), press the -/-- once, then the two digit number, i.e. -/-then 2, then 3 = Programmer 23. You may also select three digit numbers by pressing the -/-- button twice. I.e. -/--, -/-- then 2, then 3, then 4 = Programmer 234. The maximum number of programmers is 249

6-5 Volume Control

Push the remote control or front panel [V+] key, for Volume Up Push the remote control or front pane [V-] key, for Volume Down

6-6 TV/ AV /DVB/DVD Selection

This allows you to select TV, AV1 DVB-T/AV2 and

DVD modes, when you press on the front panel the TV/AV/DVD button. if you press on the remote control DVD will not display.

TV/AV

DVD

DVB-T/AV2

AV1

Page 10

TV BUTTON OPERATION(CONTINUED)

6-7 MUTE

On the TV AV DVB and DVD mode, you press the MUTE

button on the remote control to turn off the sound, and if you

press MUTE again to turn on the sound back on

NOTE: The factory default is non-mute before switching on the unit.

6-8 RECALL

RECALL You press the RECALL button, on the TV screen TV sound system and program

number OSD would displayed.

6-9 P.P (PICTURE EFFECT)

P.P You can quickly select the desired picture mode from three factory preset modes and

one customized mode.

By repeatedly pushing this key, picture effects will change as follows.

6-10 SLEEP (Sleep Timer)

Press the SLEEP button to set the required time.The Count down will start immediately. Note: To check timer left, press the sleep button once. To cancel the sleep timer, press the SLEEP button to set the timer to 0.

6-11 SWAP(program swap)

Swap function enables quick swap to the last watched program. 1 suppose the channel number you used just is 8 and the channel number you are using is 18 (as shown in the figure). 2 If you want to return to the last watched program channel 8,you can simply press the SWAP button; 3 If you want to return to channel 18, press the button again.

Through this function, you can easily change between the

channel you are using and the channel you used last time.

STANDARD DYNAMIC PP MILD

MUTE

STANDARD

SWAP

225

240

SLEEP

Page 11

7 TV MENU OPERATION TV MENU (remote control/ TV button)

By repeatedly pressing on the remote control or front panel the menu button, the TV menu will change as follows: PICTURE, SOUND, SETUP, TUNE, PROG.exchange,

Exit. If in AV DVB and DVD Mode PROG.exchange will not be displayed. If no button is pressed for more than several seconds the TV will exit the Menu.

7-1 picture menu

Press the TV MENU on the remote control or on the

front panel, until the PICTURE menu appears. 1 Press the P+/- key to select the item you want to adjust; 2 Press the V+/- key to adjust date;

ITEM PRESS V- PRESS V+ CONTRAST Weak Strong BRIGHTNESS Dark Bright COLOUR Shallow Deep SHARPNESS Soft Sharp *HUE Lean to purple Lean to green

Note: ”Hue” item only appears when the color system Is NTSC. DNR is noise reduce.

7-2 SOUND MENU

Press the TV MENU on the remote control or on the front panel, until the SOUND menu appears.

Press the V+/- key to adjust volume.

7-3 SETUP MENU

Press the TV MENU on the remote control or on the

front panel, until the SETUP menu appears.

A LANGUAGE FUNCTION

1 Press the P+/- key to select LANGUAGE item; 2 Press the V+/- to select your desired OSD language; ; 3 Language OSD including ENGLINSH, FRANCE,

GERMANY and RUSSIA etc.(you want to select OSD LANGUAGE, the language must setup. .

B BLUEBACK FUNCTION

1 Press the P+/- key to select BLUEBACK item; 2 Press the V+/- key to toggle through on and off,

C CHILD LOCK FUNCTION

1 Press the P+/- key to select BLUEBACK item; 2 Press the V+/- key to toggle through on and off,

3 If you select to ON, the TV key will not effect;

SOUND VOLUME 32

PICTURE BRIGHTNESS 32 COLOUR 32 CONTRAST 32 SHARPNESS 32 HUE 0 DNR OFF

SETUP LANGUAGE ENGLISH BLUEBACK ON CHILDLOCK OFF AVL OFF TIMER GAME CALENDAR

Page 12

S M T W T F S

1 2 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 21 22 23 24 25 26 27 28 29 30

Y: 2004 M: 6 D: 20

PROG.EXCHANGE PROG.I 2 PROG.II 0 EXCHAGE

D TMER FUNCTION

1 Press the P+/- key to select TIMER item; 2 Press the V+ key to enter TIMER MENU; 3 Press the P+/- key to select “CLOCK”, “ON-TIME”,

“OFF-TIME”, “SLEEP TIME”, or “REMIND TIME”.

4 Press the V+/- key to change date, minutes will change

from “00” to “59”, hours will change as follows “0,1…23,--：--”

5 For “ON-TIME” , “OFF-TIME” or “REMIND TIME”

setting using [P+]/[P-] keys, select “ON PROG” Using [V+]/[V-] keys, change On-Program number.

6 Using [P+]/[P-] keys, select “SLEEP TIMER” Using [V+]/[V-] keys, sleep timer will

change as follow; “0 →10 → 20 → 30 → 40→… 240 → 0”

7 Press MENU button, return to main MENU;

E GAME FUNCTION

1 Press the P+/- key to select GAME item, then press V+/- key to enter game; 2 Using MENU to rotate clockwise, using P+ key to rotate anti-clockwise; 3 Using V- key to move left, using V+ key to move right; 4 Press TV/AV button to quit the game;

F CALENDAR FUNCTION

1 Press the P+/- key to select calendar item, 2 Press V+/- key to enter calendar; 3 Press the P+/- key to turn the YEAR MONTH DAY; 4 Press the V+/- key to set or adjust the YEAR MONTH DAY. 5 Press the menu button to return the main menu;

G AVL FUNCTION (auto volume level)

1 Press the P+/- key to select AVL r item, 2 Press the V+/- key , AVL will be turned OFF and ON

7-4 PROGRAM EXCHANGE (PROG.EXCHANGE)

After auto search there may be some program numbers

duplicated and some blank. To reorder the channels.

Press the TV MENU on the remote control or on the

front panel, until the PROG.EXCHANGE menu appears.

1 Press the P+/- button to select PROG.I, then press the

V+/- button to set desired program;

2 Press the P+/- button to select PROG.I I, then press the

V+/- button to set desired program;

3 Press the P+/- button to select EXCHANGE ,then press

the V+/-to set EXCHANGE.

TIMER CLOCK --:-ON TIME --:-ON PROG 1 OFF TIME --:-SLEEP 0 REMIND TIME --:-REMIND PROG 1

Page 13

TUNE AUTO SEARCH SEARCH BAND VHF-L FINE TUNE COLOR AUTO SKIP OFF PROGRAM 2

FINE TUNE VHF-L I

7-5 TUNE MENU

Press the TV MENU on the remote control or on the front panel, until the TUNE menu appears.(FOR RIGHT FIGURE) Note: if you select sound system is error, the TV will not sound. if you select COLOUR system is error, the TV will not

color. Color sys will change as follows;

AUTO

PAL NTSC3.58 NTSC4.43 SECAM

A AUTO SEARCH

1 Press the P+/- buttons to select AUTO SEARCH; 2 Press the V+ button to start auto search. The TV will begin memorizing all the channels available in your area.

B SEARCH

1 Press the P+/- buttons to select PROGRAM, then

Press the V+/- buttons to select the program number

you want to store; 2 Press the P+/- buttons to select SERAH; 3 Press the V+/- buttons to start the tuning search.

When the search finds a strong channel signal it will Stop searching. The picture and the Tune menu will appear.

4 continue the tuning procedure until you have tuned in

all the channels required. To exit, press the TV menu button;

C FINE TUNE(manual fine tune)

Under poor reception conditions it is sometimes possible to improve the quality of picture and sound using the fine tune.

1 Press the P+/- buttons or PROGRAM NUMBER 0-9

button to choose desired channels; 2 Press the TV MNEU until the TUNE menu appears; 3 Press the P+/- buttons to select FINE TUNE item; 4 Press V+/-to adjust for the best possible picture and

Sound results;

D SKIP (program skip)

After presetting, you can skip needless channels so that you could choose the desired channels.

1 Press the P+/- buttons to select the desired program to be shipped; 2 Press the TV MENU until the TUNE menu appears, Press the P+/- buttons to select skip; 3 Press the V-/+ buttons to turn the skip function “ON”;

If you want to recover the skipped channel

1 Use the PROGRAM NUMBER buttons to select the channel number to be recovered; 2 Repeat the above procedure 2; 3 Press the V+/- buttons to turn the skip function “OFF”;

AUTO SEARCH VHF-L I

SEARCH VHF-L I

Page 14

8 DVD BASIC OPERATIONS

8-1 Preparations Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control to enter the DVD

status. Press the TV/AV/DVD button on the front panel or TV/DVD on the remote control again to return to the TV mode.

Note: The unit did not allow enter DVD mode again after it have just left to avoid any damage of the DVD.

Wait for 10 second to enter again

8-2 OPEN AND CLOSE

1. Press OPEN/CLOSE to open the disc tray on the remote control or on the front panel, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place a disc, which is unplayable in this DVD player.

2. Press OPEN/CLOSE to close the disc tray, the playback will automatically start. Some disc may not playback automatically, you can press ENTER/PLAY button to start playback.

3. Some disc may start playback with a menu, use the cursor button on the remote control to select menu options and press ENTER/PLAY to start, or press digits to select a menu options directly.

8-3 PAUSE/ STEP PAUSE PLAYBACK

1. Press PAUSE/STEP to pause playback (still mode). The sound will be muted during still mode.

2. Press ENTER/PLAY to resume normal playback.

SINGLE STEP PLAYBACK

1. Press the PAUSE/STEP button to pause the playback.

2. To view the next frame, press the PAUSE/STEP button. Each press of the PAUSE/STEP button advances the film by one frame.

8-4 STOP PLAYBACK

1. Press STOP button to go to stop mode, the TV screen will show the start-up logo. For some disc the player can recall the location where stopped, such as DVDS and audio CDs.

2. Press ENTER/PLAY to resume playback from the location where playback is stopped.

3. Press STOP twice to stop completely.

8-5 PREVIOUS AND NEXT

During playback, press PREV key can go back to the beginning of this chapter, then each

press of this key will skip a chapter till the start of the disc. Note: Disc function may vary depending on disc format. Each press of NEXT key during playback will skip the current chapter and play the next one.

8-6 FAST FORWARD AND FAST REVERSE

1. Press F.FWD to fast forward through the disc. Each time the F.FWD button is pressed,

the fast forward motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

2. Press ENTER/PLAY to resume normal playback.

3. Press F.REV to fast reverse through the disc. Each time the F.REV button is pressed,

the fast reverse motion speed changes. It would cycle through 2X, 4X, 8X, 16X, 32X and normal.

4. Press ENTER/PLAY to resume normal playback.

Page 15

IMPORTANT NOTE:

All describing function is for DVD discs. if you play other format disc, the operation and display on screen may different.

8-7 SUBTITLE

Press " SUBTITLE ", the screen will display "SUBTITLE 01/XX XXXXX", "01" indicates the

ordinal number of this language; "XX" indicates total number of language; "XXXXXX” indicates

the language of country. (The number of language depends on disc). This function can select up to

8 languages displayed on screen.

8-8 REPEAT

Press " REPEAT “ can cycle among 'Chapter repeat', 'Title repeat', 'all repeat' and 'off'.

8-9 REPEAT A-B Press Repeat A-B to mark the start-point, press again to set an end point to complete setting.

The selected section A-B will be repeated immediately. Press the Repeat A-B again to cancel this function.

8-10 ANGLE

When enjoying sports, concert or theatre, press this key to watch same actions in different angles.

(Valid for discs possessing this function. Using a disc recorded in multi-angle you can view the scene from different angles, for example, front, side, whole view and exterior scene.)

8-11 DVD MENU Press this key to display root menu, select item according to your preference. (This function will

work with a DVD having a multi-layer menu.).

8-12 TITLE/PBC

With some DVD discs pressing this key will display the title menu. You can then use the digit

buttons to select the item you prefer.

8-13 PROGRAM When playing discs, press “ PROG “ to enter program mode. Press the digit buttons to

select the program number that you want. When finished, move the cursor to select "START”. This will start the program playback. If you want to cancel this function, press " STOP “, then press "ENTER/PLAY”.

8-14 SEARCH

Press "SEARCH" once to display the search menu. Press again to cancel. Use the UP/DOWN

cursor buttons to select the item you require. Press PLAY/ENTER to confirm.

8-15 SLOW PLAY

Press SLOW PLAY to play a disc in slow forward. Each time the SLOW button is pressed, the

slow motion speed changes. Press ENTER/PLAY to resume normal playback.

Note: This function is invalid for CD and MP3.

8-16 AUDIO

Press this key can change the audio mode.

such as: Audio 1/2: AC 3 2 CH English Audio 2/2: AC 3 5.1 CH English If you play CD disc, press this button can cycle among Mono Left, Mono Right, Mix-Mono and Stereo.

Page 16

9 Mp3 Playback

The DVD player can playback discs, including CD-R, CD-RW, DVD-R, DVD-RW, DVD+R or DVD+RW recorded with MP3 audio files. Multiple and multi-level directories are supported.

Upon loading an MP3 disc, the screen shows a menu as:

1) To go to a preferred directory, use the up or dow n button arrow keys to scroll to your selection

and then press ENTER/PLAY key to confirm.

2) Use the up or down button arrow keys to select song and press ENTER/PLAY button to start

playing.

3) Press left arrow button can return to the parent directory, you can then select other directory.

Play mode:

There are four play modes available, when playing, press REPEAT button to choose the MP3 play

mode:

1) SINGLE all files will be played only once.

2) REPEAT ONE Play the selected file repeatedly

3) REPEAT FOLDER all files in the selected folder will be played repeatedly

FOLDER All files in the selected folder will be played only once.

Other Functions

Functions such as MUTE, VOLUME, PAUSE, PREVIOUS, NEXT etc. are also available for MP3 discs and they function same as playing audio CDs.

Page 17

10 Playing Kodak Picture CD or JPEG files

The DVD player is compatible to Kodak Picture CD and discs containing JPEG image files

(With .JPG file extension). This function is similar to MP3 playback function.

Operations:

1) Picture selection & Preview Press buttons to select the target picture and press ENTER/PLAY button to show. The player

will show the preview of the picture in preview area once the cursor stops.

2) Rotate Picture: You can use “up down left right” buttons to rotate current showing picture.

3) Previous and Next selection: You can press

button to show previous picture or button to show next picture

manually.

11 SCREEN SAVER FUNCTION

If this unit is not working by 20 minutes, it will go to sleep mode with screen saver on. In this mode,

you can press any key on remote control or on front panel to activate the unit. You can set SCREEN SAVER function to OFF in GENERAL SETUP PAGE of DVD SYSTEM SETUP.

Page 18

12 DVD SYSTEM SETUP

When you press SETUP button successively on the remote control, the setup menu will be displayed. It includes General Setting, Analog Audio Setup, Dolby Digital Setup, Video Setup and Preference menu.

1. Within the setup menu, you can use

buttons on the remote control to move the

cursor, and press the ENTER/PLAY button to make your selection.

2. Press successively the SETUP button to exit setup menu.

1 GENERAL SETUP

TV DISPLAY

This allows you to select the display mode to suit the TV you are connecting to. Note: No matter which display format is selected, a picture recorded in standard normal format always displays in the normal aspect ratio. The display format of DVD titles may vary; please refer to the information that accompanies your specific DVD title. If the DVD title is recorded in wide display format while the TV is a standard normal screen, horizontal compression of the image will be resulted. Some DVD titles may be recorded in special formats. In such cases, the DVD titles will always appear on the screen in their original format, regardless of which TV display format you select.

ANGLE MARK

You can choose to hide or display the angle mark on the screen.

..---General setup page..-- Tv Display Ps Angle mark On Osd lang Eng Captions Off Screen saver On Last memory Off

General Audio Dolby Preference

On Off

Set ANGLE MARK

..---General setup page..-- Tv Display Ps Angle mark On Osd lang Eng Captions OFF Screen saver On Last memory Off

General Audio Dolby Preference

ormal/Ps

ormal/Lb

Wide

Set TV Display Mode

Page 19

OSD LANGUAGE

To select the On-Screen-Display language, default setting is English. You can select ENGLISH FRENCH GERMAN.

CAPTIONS and Screen saver

CAPTIONS

For hearing impaired people. The picture can be

displayed with recorded explanatory captions.

Screen saver If the screen saver is on, then there will be an

animated picture on the screen whenever the DVD player is idle for a certain time.

LAST MEMORY

This function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last Memory function is effective even the disc is removed from the player

When Last Memory is ON, each time when you remove a disc or stop playing and go to standby, the DVD player memorizes the point when the DVD was stopped. The DVD playback may be resumed from the memorized point. This function works when the power remains on or in standby. The memory point is lost if the TV is switched off.

General Audio Dolby Preference

..---General setup page..-- Tv Display Ps Angle mark On Osd lang Eng Captions Off Screen saver On Last memory Off

English

French German

Set Osd language

..---General setup page..-- Tv Display Ps Angle mark On Osd lang Eng Captions Off Screen saver On Last memory Off

General Audio Dolby Preference

On Off

SET LAST MEMORY STATE

..---General setup page..-- Tv Display Ps Angle mark On Osd lang Eng Captions Off Screen saver On Last memory Off

General Audio Dolby Preference

On Off

Closed Caption

Page 20

2 Audio Setup

LT/RT: Select this option when the DVD player

is connect to external amplifier with Pro-Logic decoding function.

STEREO: Select this option when you want to use

only the front-left & front-right speakers

with normal sound effect.

3 DOLBY DIGITAL SETUP

Dual Mono

Stereo: The player will output Left channel and

Right channel audio.

L-Mono: The player will output left channel

audio only from the 2 front channels.

R-Mono: The player will output right channel

audio only from the 2 front channels.

MIXMono: The player will output the average

signal of the mixed Left channel and Right channel audio from the 2 front channels

DYNAMIC

This is to set the dynamic compression ratio. Press the right arrow button to enter the setup column; adjust the rate of the dynamic range by pressing up or down arrow button. Default setting is off.

..Dolby digital setup.. DUAL Dynamic

General Audio Dolby Preference

FULL 3/4 1/2 1/4 OFF

SET DRC Off

--Speaker setup page- Down mix

General Audio Dolby Preference

LT/RT STEREO

SET DOWNMIX MODE

General Audio Dolby Preference

--Dolby digital setup- Dual Mone Dynamic

STEREO L-MONO R-MONO MIX-MONO

DUAL MONO (1+1)SETUP

Page 21

4 Preference setup

This function works when the power remains on or in standby. The memory point is lost if the TV is switched off.

TV TYPE

PAL

This is selected when the player is connected to an PAL TV. AUTO (multil)

The player will set the TV standard according to the disc in the tray. NTSC

This is selected when the player is connected to an NTSC TV

AUDIO

Some DVD discs contain the soundtrack in

several language. Select the appropriate

language by using this function.

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

SUBTITLE

Some DVD discs contain subtitles in several

Languages. Using this function to select the

appropriate subtitle language.

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

..Preference page..

TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

PREFERENCE AUDIO LANGUAGE

..Preference page..

TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

PREFERENCE SUBTITLE LANGUAGE

--Preference page- TV TYPE

AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

PAL

UTO

NTSC

Go to preference page

Page 22

DISC MENU

Some DVD discs contain the menus in several languages. Using this function to select the appropriate menu language.

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

PARENTAL

When playing a disc with the Parental Lock feature,

you may select an age control grade. E.g. :- If PG is selected then the player will not play any disc with

a higher grading. G = General PG = Parental Guidance PG13 = Parental Guidance (over 13) PGR = Parental Guidance (Restricted violence and

language). R = Restricted violence and language NCD = Adult theme or content DADULT = Adult content (hardcore sex and violence) OFF Note: To change this setting you must enter your password. (Initial password is 49540)

PASSWORD

User can change the password that is required when the user want to change the AGE control grade in the parental lock function.

NOTE:

The factory setting of the password is “49540”

..Preference page..

TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

ENGLISH FRANCE SPANISH GERMAN ITALIAN FINLAND DANMARK SWEDISH

PREFERENCE DISC MENU LANGUAGE

--Preference page.-TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

1 Kid sdf 2 G 3 PG 4 PG13 5 PGR 6 R 7 NCD 8 AUDLT 9 OFF

Set Parental Control

..Preference page..

TV TYPE AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

CHANGE

CHANGE PASSWORD

OLD PASSWORD

NEW PASSWORD CONFIRM

Page 23

DEFAULT

Resets all settings (except password and parental lock status) for this DVD player back to the manufacturer's original settings. Press ENTER to perform the reset.

13 Playable Discs The follow ing discs can be played:

You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depends on the way of disc burning. In a few cases, their performance may not be very well or even not playable.

-- Preference page.--

TV TYPE

AUDIO SUBTITLE DISC MENU PARENTAL PASSWORD DEFAULT

General Audio Dolby Preference

RESET

LOADING FACTORY SETTING

Page 24

14 Disc Protection and DVD Characteristics

Compare DVD disc with other discs:

DVD LD

SVCD

CD CD

Encode method

Digita l /MPEG

Analog

Digital

Digita l/

MPEG

Digital

Capacity

650MB 650MB 650MB

133 minutes

242 minutes

266 minutes

484 minutes

Playing Time

Single-side 60 minutes double-side

120 minutes

45 minutes 74 minutes 74 minutes

12cm/8cm 12cm/8cm

Disc diam eter

30cm/20cm 12cm 12cm

Horizontal resolution

More than 500 line

No more than

430 line

No more than

350 line

No more than

250 line

Multiple kinds

Picture proportion

One kind

Subtitle

32 kinds

16 kinds at most

4 kinds at most

4 kinds

2 kinds 2 kinds

Language

8 kinds

Sound quality

48KHz, 96KHz/

6, 20, 24bit

44.1KHz/ 16bit

Singleside singlelayer

4.7G

Double

-side single

-layer

8.5G

Singleside doublelayer

9.4G

Doubleside doublelayer 17G

Page 25

15 DVB-T OPERATIONS

Preparations

Insert DVB-T antenna to DVB-T antenna socket, and then press the TV/AV button on the remote

control or press the TV/AV/DVD button on the front panel to enter DVB-T/AV2 mode. You are waiting several second, picture will display on screen.

Note: when you enter DVB-T/AV2, press the DVB button, all the DVB-T’s buttons have effect,

otherwise all the DVB-T’s buttons have not effect.

15-1 Basic operations first time tuning

Once the receiver has been correctly connected, the unit must be tuned by scanning for available signals when being used for the first time.

Tuning the Receiver for the First Time

When the receiver is powered up for the first time a welcome screen is displayed.

 Select English using Up / down keys in

LANGUAGE SELECTION

 Select England in REGION SELECTION  Press [ OK ] on the remote to tune the unit.

Tuning takes a few minutes. A progress bar is

displayed at the bottom of the screen. Please wait.

Once the receiver has been completely tuned it will automatically display the first channel.

At this point, tuning is complete and you can now use your receiver.

If at a later point you would like to retune your receiver to either add new channels or to rescan previously deleted channels, you may do so by following the instructions in the “Advanced

Operations” section.

Note To learn about other advanced settings such as “Parental Control,” “TV Setup” “Language,” “Setting your PIN” and “Timer Programming and Recording” refer to the “Advanced Operations” section.

Page 26

15-2 Program Information

TV Guide

The TV guide shows details of programmers while allowing you to watch a smaller picture of a selected channel.  Press [ Guide ] on the remote to access

the TV Guide.

 Select channel listing by using the up

and down navigation buttons.

 To find out what is on now or next on a

particular channel use the left and right navigation buttons.

 Press [ OK ] to view the selected channel.  To set a reminder for a programmer that

you wish to view later press the right navigation button to enter into the “Next” menu and press [Green].

 A “REM” icon will appear alongside the

programmer and prior to the start of the show a prompt will appear on the screen. Press [OK] to select the program or [ EXIT ] to cancel.

Information Banner

The information banner shows details

of the current programmer.  Press [ i ] on the remote.

You are able to view the current programmer

 To view details of the next programmer

press the right navigation button.

 To view more details of the current

programmer press [ i ] again.

Page 27

15-3 Lists and Interactive Services

Service Organizer

This list contains all the channels that were tuned in during either an Auto tune or Manual tune. You can delete any unwanted channels or add channels to your Favorite List. To add these channels back you will have to perform an Auto or Manual tune. Alternatively, you can also rename channels in this list.

 Press [ Menu ] on the remote and then select

“Service Organizer” and press [ OK ].

 Select a channel using the up and down

navigation buttons.

 To delete this channel press the [Red] button.

 To rename this channel press the [Yellow]

button to go to the “Edit” screen.

 In the “Edit” screen, use the navigation buttons

to select a name of choice. To use a particular letter press the [OK] button.

 To save the name change press the [ Green ]

button.

 To cancel the name change press the [ Yellow ]

button.

Favorites

All Free-to-View services are automatically set to favorites after an Auto or Manual tune.

 Press [Menu] on the remote and then select

“Favorites” and press [OK].

 To create a new Favorite list press the [Green] button.

 To edit the contents of your favorite list press the [Yellow] button.

Page 28

 Use the up and down navigation buttons to

select a channel from the total list and press

[OK] to add it to your favorites list.

 You may move between the service list channels

and your favorites list by using the right and left navigation buttons.

 To remove a channel from your favorites list

press the [ Red ] button.

 To rename the list press the [ Yellow ] button to

go to the “Edit” screen.

 In the “Edit” screen, use the navigation buttons to

select a name of choice. To use a particular letter press the [OK] button.

 To save the name change press the [Green] button.

 To cancel the name change press the [Yellow] button.

 To exit this menu press the [ Exit ] button.

Teletext and Interactive Services

If the channel that you have chosen has Teletext (MHEG) features then you can enter into “Text” mode to access them.

 To enter into “Text” mode press [Text] on the remote.  To return to normal viewing press [Text] again.

Note Channels that offer Teletext will also provide details on how to use the interactive features on the screen.

Page 29

15-4 Advanced Operations Tuning the Receiver

Additional setup menu options are available for you to set up your system.

In the event that you may have deleted a channel that you would like to add back, or you would like to scan for new channels, you can use either of the tuning methods of your choice that are described in this section.

Automatic Scan (Automatic Tuning)

 Press [Menu] on the remote to display

Menu screen.

 Use the navigation buttons to highlight

the “Setup” option and press [OK].

You will be prompted to enter your Personal Identification Number (PIN) to access the “Service Setup” menu.

 Enter your four digit PIN ( the default

PIN is set to 0000).

 In the “ Service Setup ” menu select “ Full

Scan Add New Services ” or “Full Scan Replace Existing Services” and press [OK].

The “Full Scan Add New Services” option will add new channels that are available to your receiver whereas the “ Full Scan Replace Existing Services ” option will replace the current channel settings and scan for new ones

Page 30

Manual Scan (manual tuning)

The “Manual Scan” option allows you to

manually tune your receiver.

 Follow the directions provided in the

Automatic Scan section to arrive at the “Service Setup” menu (you will have to re-enter the PIN exactly as indicated in the Automatic Scan section).

 Select “Manual Scan” and press [OK].

The receiver can be scanned manually by changing the following settings:

Channel – sets the required UHF channel

and will automatically ﬁ ll in the frequency.

Frequency – overrides the channel setting, if selected, and sets the frequency in kHz.

Tx Mode – changes the transmission mode between 2K and 8K.

Guard Interval – sets the guard interval. The options are 1/4, 1/8, 1/16 and 1/32.

 Select the option of choice and use the right

and left navigation buttons to change the values for scanning. Select the “Scan” option and press the right navigation button

Page 31

Full Scan

The “Full Scan” option allows you to modify the parameters that will be used when tuning your receiver.

Follow the directions provided in the Automatic

Scan section to arrive at the “Service Setup” menu

( you will have to re-enter the PIN exactly as indicated in the Automatic Scan section).

Select “ Full Scan Setup ” and press [ OK ].

The following settings may be adjusted:

Transmission Mode – options to select 2K and 8K. Guard Interval – options to include guard intervals of 1/4, 1/8, 1/16 and 1/32.

 Select your choice of transmission modes and

guard intervals by using the navigation buttons.

 Press [ Exit ] to save changes and exit this menu.

Note : If after changing various tuning parameters you find you can no longer tune TV channels, you can revert to the ex-factory condition. In this condition no TV channels are tuned and you must start from the very beginning to reset to the ex-factory condition. In order to reset the ex-factory state: select the main

menu and press 0000

Note

The default settings are set for the UK DTT network, which are ‘Yes’ for 2K transmission mode and 1/32 guard interval.

Page 32

15-5 Language and TV Setup

This feature allows you to set the languages for subtitles, data services, audio and on screen display. The choice of languages offered is English, Welsh and Gaelic.

 Press [Menu] on the remote.

 Select “Setup” and press [OK].

 Select “Languages” and press [OK].

 Select a feature and select your desired

language.

 Press [Exit] to save changes and exit this

menu.

TV Setup

This feature allows you to set the receiver to best suit your TV type.

 Press [Menu] on the remote.  Select “TV Setup” and press [OK].  Select “Television Type.” Choose 16:9 for

a wide screen TV or 4:3 for a conventional one.

 The “Wide screen” option is only available if you

selected 4:3 as your TV type. You are now prompted to choose how you would like wide screen images to be shown on your TV. Choose from Letterbox, Center Cutout or Full Frame.

 The “Standard” option sets the SCART output

mode. The options are CVBS and RGB. The TV is CVBS.

 The UHF - Please note this feature is not used

on this model.

 Press [Exit] to save changes and exit this menu.

Page 33

15-6 Parental Control

Parental controls can be set to create viewing restrictions on your receiver. It is advised that you first create your own Personal Identification Number (PIN).

Setting your PIN

The default PIN has been set to 0000. You can

change this as follows:

 Press [ Menu ] on the remote.  Select “TV Setup” and press [ OK ].  Select “ Parental Control ” and press [ OK ].  You will be prompted to enter your PIN.  Enter the default PIN 0000.  Select “Change PIN” and press [OK].  Enter a new PIN in the “Enter New PIN” space.

You can only choose from numbers 0-9.  Re-enter new PIN in the “Confirm New PIN” space.

Setting Censorship

You may set a blocking age on service programmers as follows:

 Press [ Menu ] on the remote.  Select “TV Setup” and press [ OK ].  Select “Parental Control” and press [ OK ].  Enter your PIN.  To set a blocking age select “Censorship” and

use the right and left navigation buttons to select desired blocking age.

You can choose to block all programmers by selecting “Block,” or set blocks for ages 18+, 15+, 12+ or 6+. You may turn off age blocking by selecting “Off.”

Page 34

Lock/Unlock Services

Selecting the Lock/Unlock Services option allows

you to select channels and apply your parental

control blocking age to them:

 Press [ Menu ] on the remote.  Select “TV Setup” and press [ OK ].  Select “ Parental Control ” and press [ OK ].  Enter your PIN.  Select “Lock/Unlock Services” and press [OK].

 A list of channels is provided. Select a desired

channel to apply parental control to and press [OK].

 A “Lock” icon will appear on the screen to

Indicate that a particular channel has been locked. You may select other channels and do the same to lock.

 If you would like to unlock any of the channels

then select the channel and press [OK] again. The “Lock” icon should now be cleared from the screen.

Note

Programmers being aired all have an age rating for censorship and they will be compared to the parental control setting it has been set up. For programmers for which age blocking will apply you will be prompted to enter your PIN for viewing.

Page 35

15-7 Timer Programming and Recording

To record a TV program using your VCR ensure that the connections to your VCR are as shown in the “Connections” section and use your VCR as normal. You can set timer manually or automatically from the guide.

Timer Programming (manual)

The “Timer Programming” function enables the receiver to automatically switch to your preselected channels at pre-selected times.

 Press [ Menu ], select “ Timer Programming”

and press [ OK ].

 Press [ OK ] make a new entry or edit an old Entry.

In the “Enter Details” mode to move between options use the up and down navigation buttons. To edit details use the right and left navigation buttons, or enter 0-9 on the remote where applicable.

 In the “CN” option enter the three-digit channel of

choice.

 In the “Date” option enter the date in the dd / mm /

yyyy format.

 In the “Time” option enter the start time in the

hh:mm format.

 In the “Duration” option enter the duration. Use the

hh:mm format.

 If you would like to repeat this recording regularly

enter your selection in the “Repeat” option. Your choices are No, Weekly, Daily, Mon-Fri and Mon-Sat.

 If the program includes subtitles and you would

like to record them select “ Yes ” in the “ Subtitles ” option. Otherwise, choose “No.”

 Press [ OK ] to save entry.

Page 36

15-8 Upgrading your Receiver

New services are sometimes launched that may require you to upgrade your receiver’s software

before you can use them. New features may also be introduced to enhance your receiver.

Notification

This menu is displayed when a new

Over-the-Air-Download” is detected after power-up.

You can choose to download immediately or at a later point.

 To start the download right away select “Download

Now” and press [OK].

 To download at a later point select “Download

Later” and set the timer for downloading later.

 To refuse the download at this time press [Exit].

The notification menu will be displayed again the next time the receiver is powered up.

Check for Download

You can also check for downloads manually.

 To manually check for downloads press [Menu],

select “Setup” and press [OK].

 Select “Check for Downloads” and press [OK].  If no download is available press [Exit].

Note

It is recommended that you keep your receiver up to date. During a download DO NOT switch off the receiver.

15-9 Technical Information Display

Technical Information Details

The technical information screen displays the hardware and software information of the receiver. This information may be required by the service agent or service call operator.

Press [Menu], select “Setup” and press [OK]. Select “Technical Information” and press [OK].

Note It is recommended that you keep your receiver up to date. During a download DO NOT switch off the receiver.

Page 37

16 Trouble Shooting

Before calling the Help Desk please try the following to help solve any problems: -

Symptom Checks Remedy

The unit does not work ( No power)

Check that the mains plug is inserted correctly.

Re inserts the mains plug. Switch on the wall socket

Power ON does not work. Led lit

TV in standby

Use the remote control to switch set out of standby Try CH+ or CH- on Tv

Is the screen blue? YES

Connect a suitable aerial to the socket at the rear.

Tv screen not illuminated.(no picture)

Set may be in AV mode Select TV from AV Are you out of range? Move nearer the set

Battery power may be low.

If the remote is used frequently, change the batteries every 6 months.

Remote control does not function

Room brightly illuminated.

In some cases bright lighting may affect remote control functions.

For best results an external aerial is recommended.

PictureNoisy (Snowy) Incorrect aerial or broken aerial

Have aerial checked by an engineer.

PictureOk. No sound.

Volume turned down. Mute set.

Turn up the volume.Unset the “Mute”

PictureOK. No Sound Tv sound may be set incorrectly

Enter SYSTEM Menu and select “Sound system” Set to 6.0M for UK

Disc incorrectly loaded Reload disc with label side up.

DVD will not play

Disc incorrect region

Check region code. This player only plays region 2 discs.

DVD appears to play but no picture.

Disc may be dirty or damaged

Clean the disc carefully. Replace the disc with a good known one

DVD Plays in Black and White.

TV / DVD set to incorrect receiving standard

Set Player to “Auto” or PAL if it is a PAL disc

Audio or Subtitle does not work.

The disc may not support this feature.

Angle button does not work

The disc may not support this feature.

MP3 and CD-R file names appear in strange letters

MP3 file names are only recognized with the alphabet letters and (0 – 9). Only 10 characters can be displayed.

Receiver does not respond to remote control

• Unit may be in Standby mode

• Remote control batteries may be dead

• Remote control not aimed properly

• Press Standby on remote control

• Check or replace batteries

• Aim remote control at front panel

No signal found

• Aerial is disconnected

• Aerial is damaged/ misaligned

• Out of digital signal area

• Check aerial lead

• Check aerial

• Check with dealer

No picture or sound

• Tuned to digital Teletext channel

• Loose cable connections

• TV may not be in AV mode

• Retune to another channel

• Check all cable connections

• Check that AV channel is selected on TV

Forgotten lock code

• Use Pin 2846 to restore the default PIN

Messed up the tuning

• Reset the original new condition.

• Select “ Menu”

• Press 0000

Page 38

17 Specifications

Television RF input PAL I Video Input. Scart and AV 1 V PP “PAL/NTSC”

Audio Output. 3W Mono or 3+3W AV Stereo

Power supply 110 – 250 V AC 50 Hz

Power consumption

≤100 W(standard status)

Screen size 54cm Diagonal

Note: - Due to ongoing development the specifications may be changed without notice This DVD Player is designed and manufactured according to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player will not play that disc.

This Region number of this DVD Player is .

DVB-T Specifications

Modulation

Modulation Format COFDM; FFT Size 2K and 8K; Code Rates 1/2 2/3 3/4 5/6 7/8 Guard Intervals 1/4 1/8 1/16 1/32

RF Input/Loop Through

Input Frequency Range 470MHz-862MHz Input Impedance 75Ohms Loop Frequency Range 47MHZ-862MHz

Note: - Due to ongoing development the specifications may be changed without notice

Cello DCS-2195 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual