Cello C3275DVBT2 V1 User Manual

LCD digital colour TV

USER GUIDE

C3275DVBT2 V1

1

Introduction

Thank you for purchasing this TV which has been designed and manufactured to
give you many years of trouble free service.

You may already be familiar with using a similar product but please take time to read
these instructions which have been written to ensure you get the very best from your
purchase.

HDMI

HDMI (High Definition Multimedia Interface) is the next generation of digital interface.
Unlike conventional connections, it transmits uncompressed digital and audio signals
using a single cable. This TV supports high-definition video input via the HDMI
socket on the back of the TV.

Safety is important

To ensure your safety and the safety of others, please read the safety precautions
BEFORE you operate this product.

Contents

You will find the following

•TV

•UserGuide

• Quick Start Guide

• Remote Control

• 2 x AA Batteries

NOTE: If any of the items listed are damaged or missing please contact our

technical helpline on 0871 288 7345

Remote Control
Aerial connection

Connecting external devices
Common Interface slot
Auto installation setup
Source menu
Menu settings

8-11

Unit and Accessories6-7

12
13-17
18

19
19
20-27

Multimedia Operation
Recording Operation

28-30
31-33

3-5

34

35

Contents

SimpleTroubleshooting

Technical Specifications

36

Wall Mounting

Safety Information

2

Contents

1

Introduction

2

SAFETY INFORMATION

CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY
COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that there are important operating maintenance instructions in
the literature accompanying this unit.

IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.

Take note of the following safety information which appears on the back of the TV.

present within this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is

Keep these instructions

• Do not use this TV near water.

• Clean only with a slightly damp cloth.

• Do not block any ventilation openings.

• Install in accordance with the supplied Quick Start Guide and this User Guide.

• Protect the power chord from being walked on or pinched, particularly at plugs, and the
point where it exits from the TV.

• Do not allow the power chord to overhang the edge of a table.

• Unplug this TV during lightening storms or when unused for long periods of time.

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT
EXPOSE THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED
TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS
SHOULD BE PLACED ON THE TV.

NOTE: No naked flames such as candles should be placed on the TV.

3

IMPORTANT SAFETY INFORMATION (Continued)

This unit has been produced according to all current safety regulations. The following safety
tips should safeguard users against careless use and the dangers connected with such use.

Although this appliance has been carefully manufactured and rigorously checked

prior leaving the factory, as with all electrical appliances it is possible for problems to
develop. If you notice smoke, an excessive build up of heat or any other unexpected
phenomena, you should disconnect the plug from the mains power socket
immediately.

Ensure that the unit is sufficiently ventilated! Never place next to or underneath

curtains!
The mains plug or appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operarble.

This set should only be connected to a mains power supply which matches that

stated on the label on the rear of the TV – do not attempt to connect it to any other

type of supply.
The socket – outlet must be installed near the equipment and easily accessible.
To prevent overload, don’t share the same mains supply socket with too many other

items of equipment.
Apparatus with Class 1 construction shall be connected to a mains socket outlet with

a protective earthing connection.

Keep away from rodents. Rodents enjoy biting into electric flexes.
Always hold the plug when pulling out the plug from the mains supply socket. Do not

pull on the flex, the flex can become overloaded and cause a short circuit.

Set up the unit so that no one is able to trip over the flex.
Do not place heavy items on the flex, which may damage it.
Take note that the flex cannot be reached and pulled by young children, avoiding

injury.

Do not set up the unit near to heat sources. The casing and the flex could be

damaged by the impact of heat.

The screen is made of plastic and can break if damage is done to it. Be careful when

collecting sharp edged plastic splinters to avoid injury.

Avoid placing the unit on any surfaces that may be subject to vibrations or shocks.
To protect the unit during a thunderstorm unplug the AC power cable and disconnect

the aerial. Caution: Do not touch the aerial (RF) connector.

When you leave your home for long periods of time, unplug the AC power cable for

safety reasons.

The unit becomes warm when in operation. Do not place any covers or blankets on

the unit in order to prevent overheating. The ventilation holes are not to be blocked.
Do not set up near radiators. Do not place in direct sunshine. When placing on a
shelf leave 5 cm (2”) free space around the whole unit.

Do not allow water or moisture to enter the TV. Do NOT use in wet or moist areas

such as Bathrooms, steamy kitchens or near swimming pools.

Do not use this unit when moisture condensation may occur

Any repairs must be carried out by qualified personnel only.
Do not open this unit. A non – expert attempting to repair the unit could be dangerous

and potentially cause a fire hazard.

4

IMPORTANT SAFETY INFORMATION (continued)

Liquids spilt into the unit can cause serious damage. Switch the set OFF and

disconnect the mains power supply, then consult a qualified service person before

attempting to use the unit again.
Do NOT remove the safety covers. There are no useable or serviceable parts inside.

Youmayinvalidatethewarranty.Qualifiedpersonnelmustonlyservicethis

apperatus.
Do NOT tap or shake the screen, you may damage the internal circuits. Take good

care of the remote control, do not drop.
Never place hot objects or open flame sources on or close to the TV.
High temperatures can melt plastic and lead to fires.

Where to install

Locate the television away from direct sunlight and strong lights, soft indirect lighting is
recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight
falling on the screen. Place the TV on a sturdy platform of which the surface should be flat
and steady. This will prevent it from falling over.
Make sure the television is located in a position where it cannot be pushed or hit by objects,
as pressure will break or damage the screen, and so that small objects cannot be inserted
into the ventilation slots or openings in the cabinet.

LED Screen

The LED display panels are manufactured using an extremely high level of precision
technology, however sometimes some parts of the screen may be missing picture elements
or have luminous spots. This is not a sign of malfunction.

Headphone Warning

Loud music can damage your hearing irreversibly, therefore do not set the volume to a high
level when listening through headphones, particularly for lengthy listening periods.

To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp cloth with dilute detergent.

5

6

Unit and Accessories

The functions of the TV buttons are described below.

Menu : Press to display the OSD menu, press again to exit the menu.

Vol +/- : Press to adjust the volume.

CH+/- : Press to skip through the channels.

TV/AV : Press to display the input source menu.

Power : Turn ON/OFF the TV set.

TV AV

MENU

CH

CH

VOL

VOL

POWER

Remote Control Window
(keep clear)

LED Indicator

TV set Remote Control

Batteries

Unit and Accessories (continued)

7

USER GUIDE

QUICK START
GUIDE

User GuideQuick Start Guide Warranty Card

Warranty Card

Power cable

Converter cable for

AV and YPbPr video

*Dependant on Model

Only used on TVs with Internet Player*.
In this mode the remote does not control
the TV.

Press

to control the TV again.

If you have set the remote to work a
Satellite receiver, the remote controls only
the Satellite receiver and not the TV when
you press

Press to control the TV again.

Used on TVs with DVD* or PVR

Used on TVs with PVR or Internet Player*

Used on TVs with PVR or Internet Player*

Dependant on the model of theTV some keys will have no function

Remote control

8

Functions of remote control buttons

HOLD TEXT

iViewer

Dependant on the Model of the TV some keys will have no function

Source Menu
ATV (Analogue)
DTV ( Freeview )
SD1 (red card)*
SD2 (green card)*
AV
Scart 1
Scart 2
S-Video*

*

HDMI 1
HDMI 2
HDMI 3
YPbPr
DVD*
VGA

Menu

Picture

Sound

Extras

TV Settings

DVD
Restore Setting

Language

setup*

Lock

Option*

Back

Exit from any Menu

Guide(DTV)

Press to enter, press again to exit.

Stop

For DVD*, iPlayer*, PVR, SD1*and SD2*.

Reverse - DVD*&SD1*, SD2*, PVR

Picture Mode

Pause/Play

DVD*, iPlayer*, SD1* und SD2*

Display the Playback list on

Display the Recorded list

SD1*

(red card)

Subtitles

DVD*and DTV mode only.

A

Displays the red recording list.
(The programmes you have booked to be
recorded).

Help

This displays a page that gives telephone
numbers for service.
Press to enter, press again to exit.

Quick Start

Searches all ATV and DTV channels by a
single key (can take up to 10 Mins).

Info-Taste

In DTV mode shows Now / Next.

2nd Press

Extended programme Info.

Whilst Recording*

Shows details of the recording and space
available on the card.

DVD* Eject

Fast forward - DVD*&SD1*, SD2*, PVR

DVD* Disc Menu

Sound - changes the sound

Next - DVD*, iPlayer*, PVR

Previous- DVD*, iPlayer*, PVR

Soft Keys

The action they perform is shown on the
menu and changes for each menu .

Teletext / MHEG5

(You can not record this)

Display the Playback list on SD2*
(green card)

B*

Displays the green recording list.
(The programmes you have booked to be
recorded).

*Dependant on Model

Remote control (continued)

9

HOLD TEXT

iViewer

Displays the timer schedule list.

Displays picture and aspect function

PVR and Time shift

USB

Dependant on the model of TV some keys will have no function

*Dependant on Model

Remote control (continued)

10

HOLD TEXT

iViewer

DVD

*

*

Remote control (continued)

Installing Batteries in the Remote Control

1. Remove the battery compartment cover at the rear of the remote
control by pushing the retaining clip forward and pulling up.

2. Install the supplied batteries, ensuring the polarity matches what
is shown in the battery compartment.

3. Replace the battery compartment cover.

Using the Remote Control

To use the remote control point it at the TV and press the required buttons. You must
be within 6 meters and at an angle of less than 30 degrees from the center of the TV.

NOTE: Sunshine or other strong light sources may interfere with the signal from the
remote control. In this situation turn the TV away from the light source.

WARNING! DO NOT LEAVE BATTERIES IN THE REMOTE CONTROL FOR
EXTENDED PERIODS AS THEY CAN LEAK OR CORRODE CAUSING DAMAGE
TO THE REMOTE CONTROL. CHECK THEM PERIODICALLY AND REPLACE
THEM AS REQUIRED.

WARNING! DO NOT MIX BATTERY TYPES. WHEN INSERTING BATTERIES,
REPLACE ALL BATTERIES AT THE SAME TIME. DO NOT MIX OLD AND NEW
BATTERIES.

WARNING! EXHAUSTED BATTERIES MUST BE TREATED WITH CARE AND
DISPOSED OF ACCORDING TO ANY SAFETY OR RECYCLING REGULATIONS
IN FORCE IN YOUR LOCAL AREA, NEVER DISPOSE OF BATTERIES INTO
GENERAL WASTE, OR FIRE.

S

WARNING! NEVER EXPOSE BATTERIES TO EXCESSIVE HEAT SUCH AS
SUNSHINE, FIRE OR THE LIKE.

11

Aerial connection

WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS
UNPLUGGED FROM THE MAINS BEFORE MAKING ANY CONNECTIONS!

Connecting the TV Antenna

Connect the TVA ntenna to the aerial socket with a 75 ohm co-axial plug. For best
results use a high gain TV aerial, preferably roof or loft mounted.

v To improve picture quality in a poor signal area, purchase
and install a signal amplifier.

v If the antenna needs to be split for two TVs, use a 2-Way

Signal Splitter (not supplied).

Connecting external devices

This instruction manual shows the simplest and most effective way of

connecting your TV to ancillary equipment. Alternate methods are listed below.

HDMI Lead

You can connect this TV to a compatible device using a HDMI lead. This method will
give the best picture.

Connect the cable from the HDMI equipment to the TV HDMI socket.

SCART Lead

You can connect this TV to a compatible device using a SCART lead. The
connection uses component video signals,

i.e. the red, green and blue (RGB)

content of the video are sent on separate signals.

VGA Cable

You can use your TV as a monitor for your personal computer by using a VGA cable.
Sound from your personal computer may also be played through the TV.

12

MINI
YPbPr

MINI
AV

Connecting external devices (continued)

13

Switch:

Turn on/off

the power supply

TV Signal

Satellite Box

or Blue Ray DVD

Common Interface

USB
device

Output to

Audio amplifier

Output to

Audio amplifier

MINI

YPbPr

MINI

AV

RJ45

CONNECTIONS

Caution:

Before connecting external devices:

Make sure to disconnect the appliances from the power supply in order to avoid any
potential damage from occurring.
Make sure to establish the required connection.
Make sure that the connectors are properly and correctly attached before connecting
the appliances to the power supply.

Connecting external devices (continued)

14

Name Function Description

VGA Connect to the PC VGA output to display PC graphics

Connect to the video output of external devices with the
converter cable

AC POWER IN Connect to power supply

SWITCH Turn on/off the power supply

Connect to the scart input / output of external devicesSCART

Connect to USB device for multimediaUSB

HDMI1/2/3 Connect to the HDMI socket of your DVD or Satellite Box

Connect to the audio signal input for AV with the converter
cable (Shared with YPbPr)

(AUDIO)L/R out Output to audio amplifier

mini YPbPr

mini

AV

Connect to the YPbPr output on external devices with the
converter cable

PC audio in PC audio input

Headphone

Connect Headphone

RF

Connect to antenna or cable source

CI slot (pay as you view card slot)

CI

COAX

Output to audio amplifier

VIDEO

Audio

L/R

RJ45

For automatic upgrades for MHEG5(Digital Text interactive
services) and HD services.

PC connection

As PCs are sometimes still supplied with a ‘conventional’ CRT monitor, you may need to
adjust the display settings of your PCs graphics card, otherwise the pictures may not appear
correctly. Switch on your PC (still with your original monitor connected) now select
the screen resolution, and select 60Hz refresh rate. Switch off your PC, then connect it to
your TV while both appliances are still switched off.

VGA, HDMI PC Connection

Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use an
HDMI cable to connect to your PC (if your PC Graphic card supports HDMI). When the HDMI
cable is used, the PC audio cable is no longer required. If you use the HDMI to DVI cable,
you will need to use the PC audio cable. Connect all cables carefully and do not bend or
break the connector pins.

When using the VGA cable

Switch on the TV
SwitchonthePC
Select PC/VGA as input source

When using the HDMI cable

Select HDMI as input source

VGA cable

Audio cable

HDMI to DVI cable

HDMI to HDMI

( All illustrated cables are not supplied)

Connecting external devices (continued)

15

Connecting Video camera and Video recorder

Video camera

Connect the AV cable to the TV and to the video camera.
Turn on both video camera and the TV.
Select AV/CVBS source
You can now see the playback picture from the video camera.

Note:

To connect the video camera using other cables, refer to the video camera
instruction manual.

Video recorder

Co

nnect the Scart cable to the TV and video recorder.
Turn on both video recorder and the TV.
Select Scart source
You can now see the playback picture from the video recorder.

Note:

To connect the video recorder using other cables, refer to the video recorder
instruction manual.

Video recorder

Scart cable

Connecting external devices (continued)

16

Videocamera

(MiniAVcables are supplied)

Mini Audio and Video transfer

cable

Connecting an audio system

Connecting a DVD player

Connect a DVD player using either a SCART cable or the HDMI cable.
(only if your external equipment supports HDMI).

(All illustrated cables are not supplied)

When using the SCART cable

Switch on the TV
Switch on the DVD player
Select SCART as input source

When using the HDMI cable

Select HDMI as input source

HDMI to HDMI

SCART

All illustrated cables are not supplied)

Connecting external devices (continued)

17

You can supply the TV sound to the stereo system (A) via either the analogue Cinch audio
output or the digital audio output (coaxial) (B).

Using the coaxial Digital Audio Output
If you have a digital sound amplifier / decoder (B), use a coaxial cable to connect the digital audio
output (coaxial) of your TV set to the corresponding digital audio input of your digital sound system.
(Please consult your digital audio system’s instructions for details)

(B)

(A)

Coaxial cable

RCA audio cable

Coax Cable

Connect to Audio Amplifier device to the COAX output jack on the TV.

USING YOUR COMMON INTERFACE SLOT

Common Interface

The Common Interface (CI) slot is designed to accept the Conditional Access
Module (CAM) and Smart Card in order to view the pay TV programmes and
additional services. Contact your Pay Per View TV service provider to get more
information about the modules and subscriptions.

NOTE: Conditional Access Module and Smart Cards are sold separately.

WARNING! SWITCH OFF YOUR TV BEFORE ANY MODULE IS INSERTED INTO THE

COMMON INTERFACE SLOT, THEN ADD THE SMART CARD TO THE CAM.

1. Turn on the TV and ensure ‘DTV’ Source is selected.

2. If the CAM is detected the TV will display the following message on the
screen. "Common Interface Module inserted" wait for a few moments
until the card is activated.

3. Select the relevant digital Pay Per View channel.

4. Detailed information on the Smart Card in use is displayed

5. Press the Ok button to access the card menu. Refer to the Module
Instruction Manual for setting details.

6. When the module is removed, the following message will appear on the
screen. "Common Interface module removed".

USER GUIDE

Common Interface Slot

18

You can select the input source menu by pressing the Source button on the remote control or
the TV / AV button on the TV.

Source

OK

When you initially turn on the TV you will see the first time installation menu as below:

Ensure that the aerial is plugged into the TV,
Make sure your Remote is in TV mode (by
pressing button), switch on the TV by
pressing . You will see the first time
installation menu.

Press the button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.

By pressing the Quick Start button the first
time installation can be recalled at any time.

TV

Auto installation setup

Source Menu

19

Power On / Off the TV

T

Press the power button on the LCD TV or the button on the remote control, the standby
indicator will light green.
To turn off the TV
Press the power button on the LCD TV or the button on the remote control, the standby
indicator will light red.

1. Turn the TV on.

2. Press the MENU button on the Remote Control.

3. Use the and buttons to navigate through the menu.

4. Press the EXIT button to exit the Menu.

LOCK MENU:

Allows you to set up a variety of lock and setup options.

TIME MENU:

Allows you to setup a variety of time options.

TV SETTINGS MENU

Allows you to search channels and set up a variety of channel options.
(Select DTV source for example)

Allows you to customize the sound options and effects.

(Select DTV source for example)

(Select DTV source for example)

(Select DTV source for example)

OPTIONS MENU:

Allows you to setup a variety of setup options.
(Select DTV source for example)

(Select DTV source for example)

Bas c Use

Menu Settings

20

Application

Menu Settings (continued)

21

1. TV SETTINGS menu

Description

Auto Scan

Press the OK button to enter the menu, and select the Channel
Tuning mode and the Country for the TV, then press OK button

start the auto tuning.

DTV Manual Tuning

Press the OK button to enter the DTV Manual Tuning menu,
select a DTV channel, press the OK button to start searching.

ATV Manual Tuning
Press the OK button to enter the ATV Manual Tuning menu.

Storage

To: Select a position for storing the programme.
System: Select a TV system for searching.
Current CH: Select the channel you want to manually tune.

Search: Press / buttons to manually search.

Fine Tune: Press / buttons to fine-tune.
Frequency: Displays the current frequency.

Note: Press the RED button to save your settings

Menu Settings (continued)

22

Programme Edit
Press the OK button to enter the Programme Edit menu as below.

Signal Information

Displays the digital

TV-signal information (DTV mode only).

CI Information

Please contact your “pay perview” provider who can supply a viewing card and cam unit with
instructions for their use.

Delete: Select a channel and press the RED

button to delete it.

Skip: Select a channel and press the

BLUE button, this will label the channel.As long as the

channel has a skip label it will be skipped when searching through the channels using
the CH+/- buttons.

Rename: Select an channel and press the GREEN button to change the name of the ATV
channel by using the buttons. (ATV mode only)
Move: Select an ATV channel, and press the YELLOW button, then you use and
buttons to change the position of the programme, press YELLOW again to confirm the
change. Press menu to exit and your new changes will be saved. (ATV mode only)

Menu Settings (continued)

23

2. PICTURE menu

Description

Picture Mode: Press OK button to enter the picture setup menu.

Choose from Home Mode, Mild, User, Energy Save and Dynamic.

Note: Contrast, Brightness, Colour and sharpness are only
available and can be adjusted in the User mode option.

Note: Red, Green and Blue are only available and can be
adjusted in the User mode option.

Contrast:

Controls the difference between the brightest and darkest regions
of the picture.

Brightness:

Controls the overall brightness of the picture.

Colour:

Control the colour

Sharpness:

Increase this setting to see crisp edges in the picture; decrease it
for soft edges.

Colour Temperature: Press OK button to enter the picture setup menu.

Red: Controls the red colour of the picture.

Green: Controls the green colour of the picture.

Blue: Controls the blue colour of the picture.

Note: When you select the "Energy Saving" option, the TV is
in an Energy saving status.

Choose from User, Cool, Standard and Warm.

Application

Menu Settings (continued)

24

3. SOUND menu

Description

Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User, and you
could adjust by yourself when select User mode.

AD Switch: Turn on the AD Switch function for amblyopia people.

SPDIF Mode: Allows you to select the output mode of the sound from PCM and Auto.

Auto Volume: This feature automatically

adjusts the audio level when the TV is turned on.

This function is activated by selecting “On”.

Surround Sound: Turn on / off the surround sound function by selecting “off” or “surround”.

Aspect Ratio: Press OK button to enter the menu to choose the aspect ratio from 4:3, 16:9,

Zoom1, Zoom2 and Panorama.

Noise Reduction:Press OK button to enter the menu to choose the aspect ratio from Off, Low,
Middle, High and Auto.

PC Setting(PC mode only): Press the OK button to enter the submenu to adjust the Horizontal
/ Vertical position or Size and Phase of the picture, or auto adjust by selecting “Audo adjust”.

Menu Settings (continued)

25

4. TIME menu

Description

Clock: Display the current time.

Off Time: Press the OK button to enter the Sub menu, this option allows you to set the time for

the TV to automatically switch off into standby mode.

On Time: Press the OK button to enter the Sub menu, this option allows you to set the time for
the TV to automatically switch on.

Sleep Timer: Activate the timer by choosing from the options 10,20,30,60,90,120,180, 240mins.

Time Zone: Allows you to select the time zone.

Menu Settings (continued)

26

OSD Language: Allows you to select the on screen display menu language.

Audio Language (can only be selected in DTV mode): Select the audio language.

Subtitle Language (can only be selected in DTV mode): Select the subtitle language.

Restore Setting: Press the OK button to restore the factory default settings.

5. OPTIONS menu

Description

Hearing Impaired: Turn on/off the Hearing Impaired function.

Country: Display the current Country. This is defaulted to UK, but can be changed by using the

Auto tune function.

PVR File System: Setup the PVR file system.
Note: The options PVR File System are described on pages 31 -33.

Menu Settings (continued)

27

Description

Lock System: Turn on/off the Lock System function.

Note:

Enter your password to operate this menu.(the default password is 0000)

Set Password: If the Password has been changed you must enter the current

password.

New: Enter the new password.

Confirm: Enter the new password.

Lock Channel: You must enter the password to view channels that have been locked. Use
and buttons to select the channel and press the GREEN button on the remote control to
lock the channel.

Parental Guidance: Control your childs viewing using the Parental Guidance mode.

6. LOCK menu

Press / / / buttons to select and the OK button to activate the file or open folder. Press
button to play the files in full screen mode. When in full screen mode press the OK button to
show the navigation option menu on the bottom of the screen or press stop button to return to files.

Multimedia Operation

Basic Operation

2). Insert the USB device.

3). Press / button to select the files on the USB device (PHOTO, MUSIC, MOVIE) , and press
OK button to view the files.

1). Press the SOURCE button on the remote control to display the input source menu, select the
USB source with the buttons and press the OK button to enter the Multimedia menu below.

28

Preview

Return to
main menu

1. Photo

2. Music

Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None.
Music: Play/Pause the background music of your choice.
Playlist: Display the playlist on the screen and select the photo of your choice.
Info: Display the information of the file.

Playlist: Display the playlist on the screen and select the photo of your choice.
Info: Display the information of the file.

Rotate: Rotate the photo clockwise/counterclockwise.
Zoom In/Out: Zoom In/Out of your photos.
Move: Move the photo in Zoom out mode.

Press / buttons to select the option on the menu, and press the OK button to activate.

Press / buttons to select the option on the menu, and press the OK button to activate.

Photo viewing

Listen to music

Multimedia Operation (continued)

29

Previous/Next: View the previous/next photo.
Pause: Play/pause the photo view.
Stop: Stop the photo view.

Previous/Next: Play the previous/next file.
Pause: Play/pause the music.
Stop: Stop the music.
FB/FF: Fast backward/fast forward.
Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None.

Multimedia Operation (continued)

30

3. Movie

Press / buttons to select the option on the menu, and press OK button to activate.

Watch a film

Previous/Next: Play the previous/next file.
Pause: Play/pause the music.
Stop: Stop the music.
FB/FF: Fast backward/fast forward.
Slow Forward: Play the movies at slow speed, press button to cancel.
Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None.
A-B Loop: Select and play the preferable part of the file by setting A and B at the beginning and end.
Press OK button to cancel.
Goto Time: Program the movie form the time you set.
Zoom out/in: Zoom out/in the movie screen.
Move: Move the photo in Zoom in mode.
Playlist: Display the playlist on the screen.
Info: Display the information of the movie.

PVR settings

Recording Operation

31

Press the MENU button, select OPTION menu, and select “PVR File System”, then press OK
button to enter the setting menu.

2). EPG menu

1). PVR File System

Select Disk: Select the device for the Record files.
Time Shift Size: Display the size of the USB device (The device has been formated).
Format Start: Format the USB device for PVR operating.
Speed Check: Display the speed of the USB device (The device has been formated).

Display the programme guide by pressing the Guide button.

Press the BLUE button to highlight the top of the table in yellow, and press the / to select
the guide mode from CHANNEL and TIME.

Press / button to highlight the date, then
press the / buttons to select the date
you want to view (7 day EPG)

Press the / buttons to highlight the channel
option, press / buttons to select the channel
you want to view.

Recording Operation (continued)

32

Record from EPG: Press the RED button on the remote control to display the record mode menu,
and set the time for recording. When the programme starts it will be recorded to the USB device

automatically.

Remind: Press the GREEN button to display the remind menu, and set the time. When the
programme starts the TV will automatically switch to this programme.

Schedule: Press the YELLOW button to display the schedule list.

Record and Time shift function buttons

Recording: Press to start recording.

3) Start Recording

: Press to enter the timeshift mode, press again to play the recording.

Stop: Press to stop recording or timeshift.

A: Displays the list of programmes scheduled for recording.

When you press REC button, the screen will display the recording menu as below:

a) Recording menu

Note: a. Display and exit full mode by pressing the REC or Exit buttons.
b. Press the STOP button to stop the recording and exit the recording mode.
c. Press the PLAY button to play the programme you are recording from the beginning.

To Top: Press the BLUE button to return to and highlight the top of the table.

Recording Operation (continued)

33

b) Timeshift menu

Note:

a. Press the STOP button to exit the Timeshift mode.
b. Press PLAY button to play the programme you are recording from the beginning.

Press PAUSE button to enter the Timeshift mode, and the picture will be paused, the
recording will begin.

USER GUIDE

34

Simple Troubleshooting

SYMPTOM REMEDY

GENERAL

Dead. No LED Lit No power to the TV.

Check all connections to the TV.

Dead Led lit red Set still in standby.

Press either the Power button or on the Remote

control.

No signal.

Blue screen.

Incorrect source
selected.

Press Source button to select correct source.

Noisy, snowy,

ghosting picture

(TV)

Poor aerial signal.

If using an indoor aerial, try moving the

aerial. Check aerial connections.

Volume set too low.

Check volume settings.

No sound

External leads not
connected "if used".

Check all external leads are connected.

Turn sound "Mute" OFF.

Sound "Mute".

If the TV display or performance fails check the TV in accordance with the following instructions. If the
TV still fails to function correctly contact your dealer for assistance.

Remote control does
not work

Remote are not in the
correct status

Ensure remote is in
TV mode by pressing
TV button.

If none of the suggestions seem to work, try switching your TV off and then on again. If this

does not work contact our technical helpline

0871 288 7345.

NOTE: The TV must only be repaired by a qualified registered service person. Never

attempt to remove the back cover as the TV has dangerous voltages inside that may cause

fatality or fire.

35

TECHNICAL SPECIFICATIONS

Specifications of the TV that you have just purchased may vary from the information in this

table due to technical innovations.

TV Specifications

Remote control specifications

Type Infrared
Control distance 6m
Control angle 30 degrees(Horizontal)
Batteries 2 x 1.5V,SizeAA
Dimensions 60 x204 x32mm
Weight 140g(without batteries)

TVSystem PAL/BG/DK/ I/SECAM/BG/DK/L/L’

Audio System BG/DK/I/L/L’

Screensize 32 ”(Diagonal)

Resolution 1366 x 768 Pixels(RGB)

Aerial input 75 (unbalanced)

Audio output power 2 x 6W

Power requirements 100-240V 50/60Hz

Power consumption 120W

Standby power consumption <1W

gk14.4thgieW

36

Wall Mounting

This unit is VESA-Compliant and designed to be wall mounted with a VESA­Compliant 200mm x 200 mm mounting kit. Mount this unit according to the
instructions of the wall bracket (not supplied)

200mm

200mm

4 Mounting holes

Screw size MB5 x 10

1. The stand must first be removed. Place the TV face down.

2. Remove the two screws that secure cover plate on the stand stem, Remove the

cover plate, then remove the four screws that secure the stand.

3. Remove and store the stand and screws.

4. Use four machine screws to mount the TV on the bracket.