Cello C 1997F Instruction Manual

19” Wide screen LCD TV

with DVB & DVD

Model No.: C 1997F

LCD Screen

Although the LCD screen is made with high-precision technology and

99.99% or more of the pixels are effective, black dots may appear or

bright points of light (red, blue or green) may appear constantly on the

LCD screen and is not a malfunction.

Safety Precautions

Caution 1

Safety Information 2

User Guidance Information

3seirosseccA/)weiVtnorF(traphcaefosemaN

Names of each part(Back View) 4

Remote control 5~6

7lortnocetomeresuotwoH/snoituacerP

Basic Use

Application

8ecruostupnignitceleS/VTDCLehtgnirewoP

CONTENTS

CustomizingTV SETTINGS 10

12

Customizing the PICTURE Settings

Customizing the SETUP Settings

Customizing the EXTRAS Settings

13

14

15

DVD operation

16

Disc care

20

Customizing the SOUND Settings

Trouble shooting 21

Specifications 22

Maintenance and Service

The lightening flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage"
within the products enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Correct disposal of this Product

This unit is a “CLASS 1” laser product. This product uses a visible laser
beam which could cause hazardous radiation exposure. Ensure the
recorder is operated as instructed. Do not remove any covers or look into
the DVD drawer opening whilst power is applied. Do NOT modify or adjust
any controls that may affect laser emissions. Should the appliance become
faulty consult a qualified technician.

This appliance complies with European Safety and Electrical
directives

“Correct Disposal of Product”
Produced after 13 August 2005. Waste electrical should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.

Caution

Caution

1

To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.

Electrical safety

The TV set should only be connected to a mains supply which matches that stated on

the label on the mains adaptor

To prevent overload, don't share the same mains supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items, which may damage the leads, on them.

- Hold the Mains plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the
aerial (if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in
wet or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

Pull the plug out immediately, and seek professional help if:

- the mains plug or cable is damaged

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture

- anything accidentally penetrates the ventilation slots

- the set doesn't work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside. You
may invalidate the warranty. Qualified personnel must only service this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for a long period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around.

Do NOT tap or shake the TV screen, you may damage the internal circuits. Take good

care of the remote control, do not drop.

To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with dilute detergent.

Safety Information

Safety Information

2

Power cable

USER GUIDE

QUICK START GUIDE

QUICK START GUIDE

USER GUIDE

Warranty Card

Warranty Card

Batteries for
Remote Control

Getting Started

3

Remote Control Window
(keep clear)

LED Indicator

Insert disc according to the label
next to the disc slot

COAX

out

rP bP Y

Name Function Description

AC POWER IN

HDMI

VGA IN

Connect to the PC VGA output to display PC graphics

Connect to the scart input / output of external equipment

Connect to the YPbPr output on external equipment.

COAX out

S-Video IN

(AUDIO)L/R IN

PC Audio IN

Headphone

RF

Connect to power supply 100 - 240V AC 50/60HZ

SCART

YPbPr

Connect to the HDMI socket of your DVD or Satellite Box

Audio signal input for AV

Connect to the S-Video output of external equipment

PC audio input

Connect headphone

Connect to Aerial, Tuner input 75 Ohm Coaxial Socket.

Output to Audio amplifier

Common Interface

:

CI slot ( Pay as you view card slot )

Connections

4

SWITCH:
Turn ON / OFF the AC power.

10

10

75mm

STANDBY

Turn the TV on/standby.

FUNCTION

Press to display the input source menu.(see page 14)

OK

+ +

123

456

789

0

RECALL

FUNCTION

STANDBY

PROGVOL

PICTURE

SOUND

MENU EXIT

QUICK START MUTE

EPG

SUBTITLE

TEXT HOLD SLEEP ASPECT

ANGLE AUDIO

INFOFAV

SETUP

ZOOM DVD-MENU

Colour buttons: short cuts-follow the coloured links in

the text.

PICTURE: Select the picture mode.
SOUND: Select the sound mode.
EPG: Electronic Programme Guide (DTV only).
SUBTITLES: For DTV and DVD only.
Cursor left/right/up/down: Cursor buttons used in

menus.

OK: Confirm Button / Display channel list.
MENU: System setup menu.
QUICK START: To tune in your TV.
FAV: Means favorite, to display the favorite channel

list defined by you.

EXIT: Exit the OSD menu.
MUTE: Mutes the Audio.
INFO: Displays now and next brief information.
VOL+/-: Adjust the volume.
PROG+/-: Skip through the channels.

5

OK

+ +

1 2 3

4 5 6

7 8 9

0

RECALL

FUNCTION

STANDBY

PROGVOL

PICTURE

SOUND

TIXEUNEM

ETUMTRATS KCIUQ

EPG

SUBTITLE

TEXT HOLD SLEEP ASPECT

ANGLE AUDIO

INFOFAV

SETUP

ZOOM DVD-MENU

0-9

Choose channel directly. Number buttons for DVD.

RECALL: Return to the previous channel viewed.

TEXT: Turn off/on the Teletext display.
HOLD: Hold or carry on the current subpage.
SLEEP: Standby timer.
ASPECT: Press to change the display mode of the -

screen.

SETUP: DVD setup menu

ZOOM: adjust picture size in DVD mode.

DVD-MENU : DVD Disc Menu.

: DVD fast forward.

: DVD fast reverse

: DVD next chapter.

: DVD previous chapter.
: load/eject DVD disc.

: play/pause DVD program.

: stop DVD program.

ANGLE: Select DVD picture angle.
AUDIO: To select audio language.

6

Use the correct batteries to avoid damage to the remote control.

7

FUNCTION

Power On / Off the LCD TV

Power Switch On / Off
Press the power switch to setting and the standby indicator will light red.
To turn on the LCD TV
Press the power button on the LCD TV or the Standby button on the remote control, the standby
indicator will light green.
To turn off the LCD TV
Press the power button on the LCD TV or the Standby button on the remote control, the standby
indicator will light red.
To turn the LCD TV off completely press the power switch to setting and the standby indica­tor light will extinguish.

You can select the input source menu by pressing the function button on the remote control or the
TV / AV button on the LCD TV.

When you initially turn on the LCD TV you will see the first time installation menu as below:

Please make sure the TV aerial is plugged
into the RF socket at the rear of the tv.

Press the OK button on the remote control to
start the tuning procedure. This process will
find all available ATV and DTV channels and
store them.

By pressing the Quick Start button the first
time installation can be recalled at any time.

8

EXTRAS MENU:

Allows you to set up a variety of lock/time and setup options.

SETUP MENU:

Allows you to setup a variety of setup options.

TV SETTINGS MENU

Allows you to search channels and set up a variety of channel options.

Allows you to customize the sound options and effects.

1. Turn the LCD TV on

2. Press the MENU button on the Remote Control.

4. Press the EXIT button to exit the Menu.

9

DTV Manual Scan Press button to enter the submenu.
Press or button to select a channel
and press OK button to start search.

Application

Customizing the TV Settings

The TV SETTINGS menu includes the following options :

Auto Scan Press and buttons to select the Country, and press and buttons
to select “Start”, and press OK button to start auto tuning.

Use the and buttons to select the TV SETTINGS menu(as the picture above), press button to enter the
menu.

10

Delete: Select a channel and press the red rectangular button on the remote control, Delete will appear on

the right of the program edit menu next to the channel you have chosen. Press the red rectangular
button again to confirm the delete, the channel will be deleted. However if you decide not to continue
to delete press the menu button to quit.

Rename: Select a program, and press GREEN button, then you can use and buttons to select the
position of the program’s name you want to change, and press and buttons to change the
character, press or button to confirm the change. Press menu to exit and it will automatically

save the current setting.(It can only rename ATV program.)

Move: Select a program, and press YELLOW button, then you can use and buttons to change the
position of the program, press YELLOW again to confirm the change. Press menu to exit and it will
automatically save the current set.

Skip: Select a channel and press the blue rectangular button to label the channel, as long as the channel has

a skip label it will be skipped when searching through the channels with the Prog+ /Prog- buttons.

FAV: Select a program, press FAV button to set the program as the favorite channel.

Note: The function RENAME and MOVE can not be used in DTV mode.

Application

Customizing the TV Settings

Program Edit: Press button to enter the submenu as the following picture.

ATV Manual Tuning Press button to enter the submenu.

Storage To Select a position to store the program.
Current CH Select a program you want to tune.
Search Press and buttons to manual search.
Fine-Tune Press and buttons to fine-tune.
Skip Select “Yes” to skip the program when you
scan the programs by CH+/­Frequency Display the current channel’s frequency.

Press RED button to save all the setups you have changed.

CI Information

Please contact your “pay per view” provider who can supply a viewing card and cam unit with
instructions for their use.

11

Picture Mode

Choose from Standard, Dynamic, User and Mild.

Contrast Controls the difference between the brightest and darkest regions of the picture.

Brightness Controls the overall brightness of the picture

Colour Control the colour.

Tint Controls the tint ( NTSC mode only).

Sharpness

Colour Temperature

Aspect Ratio

Noise Reduction

Use the and buttons to select the PICTURE menu(as the picture above), press button to enter the
menu.

Increase this setting to see crisp edges in the picture; decrease it for soft edges .

Choose from Standard, Cool, User and Warm.

Choose from Auto, 4:3, 16:9, Zoom1 and Zoom2.

Reduce any interference noise by selecting “ON”.

12

Sound Mode Allows you to select among: Standard, Music, Movie, Sports and User.

Bass(Can be adjusted when the sound mode is User)
Controls the relative intensity of lower pitched sounds.

Treble(Can be adjusted when the sound mode is User)
Controls the relative intensity of higher pitched sounds.

Balance To adjust the balance of the left and right sound track, or turn off the volume of the
left and right sound track.

Auto Volume Control the volume of the program automatically when you turn on the function by
selecting “On”.

Surround Sound Turn on/off the surround sound function by selecting “on”/“off”.

Use the and buttons to select the SOUND menu(as the picture above), press button to enter the
menu.

13

Application

Customizing the SETUP Settings

The SETUP menu includes the following options:

Language Allows you to select menu language.

Audio Language
Allows you to select audio language.

Subtitle Language
Allows you to select subtitle language.

Country Defaulted to UK.

Reset Setting Press button to restore factory default.

Use the and buttons to select the OPTION menu(as the picture above), press button to enter the
menu.

(can be selected in tv mode)

(can be selected in tv mode)

14

Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min,120min,
180min, 240min and off.

Application

Customizing the EXTRAS Settings

The EXTRAS menu includes the following options :

Use the and buttons to select the EXTRAS menu(as the picture above), press button to enter the
menu.

Child Lock

First Time Installation

PC Setup(only in VGA mode)

Set Password

Sleep Timer

* Please ensure that the aerial is connected to the connector labelled “RF”
on the rear of the TV. Press “OK” to start the tuning process.

* You can select “Language”(OSD display language), When you have
selected, pressŻŹbuttons to select “OK”.

Press button to enter the submenu to adjust the picture of the screen.

Set pin code. The default is 0000. If the Pin code has been changed you
must enter the present code.
New : Enter the new password.
Confirm: Enter the new password and press OK to complete the change.

Lock the channel, you have to enter the code to view the channel. Use Ÿź

button to select the channel, and press

the green button on the remote control
to set, and there will be a “ ” on the channel, press the green button again to
cancel.

15

DVD Operation

Place a disc

Insert a disc as instructed by the label next to the disc slot.
Do not touch the playing surface.
Hold the disc around the outside with your fingers and place the disc into the slot. The player will
automatically draw the disc into the player.
To "Eject" the disc, press the "

Play

The contents of each disc vary, as to how the disc was authored and what features are included. Some
discs start playing as soon as they have been read, some need "Play" selecting in the Menu. Different play
modes are offered, such as Menu Play, Sequence Play and other modes.

Using the Display Feature

1. Compatible with DVD, SVCD, VCD, CD, HD-CD, WMA, Digital Audio disc discs.

2. Loading and playing DVDs (two pages)

- Press INFO button once to show the first page:

- "Disc Type, Title * / * (the playing title / total titles), Chapter * / * (the playing chapter / total chapters),
Elapsed Time of the Disc".

- Press the button again to show the second page:

- "Language */* (the serial number of playing language / the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle /the amount of optional
subtitles) or Off, Angle * / * (the serial number of playing angle / the amount of optional angles) or Off".

- Press the button for the third time, the display menu fades out.

3. Loading and playing SVCD discs (two pages)

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".

- Press the button again to show the second page:

- "Language * / * (the serial number of playing language/ the amount of optional languages) or Off,
Language Type, Audio Type, Subtitle * / * (the serial number of playing subtitle / the amount of optional
subtitles) or Off".

- Press the button for the third time, the display menu fades out.

4. Loading and playing VCD

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, PBC, Repeat Mode, Elapsed Time of the
Playing Track".

- Press the button again, the display menu fades out.

5. Loading and playing CD, HD-CD, WMA, Digital Audio / JPEG discs

- Press INFO button once to show the first page:

- "Disc Type, Track * / * (the playing track / total tracks), Mute, Repeat Mode, Elapsed Time of the

Playing Track".

- Press the button again, the display menu fades out.

Subtitles

1. Compatible with DVD, SVCD discs.

2. Press the Subtitle button on the remote once, and the subtitle info banner appears

3. When a DVD or SVCD is recorded with subtitles, you can use the Subtitle feature to view the subtitles

on-screen. By default, subtitles are off. The info banner will display Subtitle Off.

4. To display subtitles, press the Subtitle button again. The default language with its responding serial

number will be displayed in the info banner and subtitles will be displayed in that language. There are
8 supported subtitles: Chinese, English, Japanese, French, Spanish, Portuguese, Germany and Latin.
With each consecutive press of the Subtitle button, the subtitle switches.
For example, "Language Icon: [1 English DTS 6CH] or [Off]" (the availability of the subtitles are
disc-dependent). To turn subtitles off, press the Subtitle button until Subtitle Off is displayed.

Turn on your TV then use the Function Button on the remote control or the TV / AV button on the TV to select
DVD mode. If there is no disc in the DVD players the screen will show “NO DISC”..

16

/ Eject " button on the TV or on the remote control.

DVD Operation

DVD System Operation

System operation will define the setting of the set; these definitions will be stored until you change them
again.

General Steps of Setup Menu

1. Pause or Stop the player. Press SETUP on the remote control. The main menu will be shown as below.

2. Press WKHŸź buttons to select the Icon of the desired section, e.g. “TV System" and press
ŹEXWWRQ to open that section.

3. 3UHVVŸź to select the desired feature and again SUHVVŹ button to open that section.

4. 3UHVVŸź to select the desired feature and then press "OK" to select the new setting.

5 To exit the menu, press "SETUP" RUź to select EXIT SETUP and then press "OK"

When launching the setup routine, the pressing of the following buttons will turn off the setup menu,
while the choices that have been changed will be saved.

Menu specification

1. SYSTEM SETUP

The system setup options are illustrated below:

3. The player will then start to play the first track, of the selected directory.

4. To change directories use the direction buttons.

Zoom In the Video Image

1. Compatible with DVD, SVCD, VCD, JPEG discs.

2. The Zoom Function allows you to enlarge the video image.

3. Press Zoom repeatedly to activate the function and choose the required zoom factor: Zoom 2,
Zoom 3, Zoom 4, Zoom 1  Zoom 1  Zoom  Zoom Off.

Digital Audio Disc

1. Compatible with Digital Audio discs

2. The player will search the disc directory automatically and display the contents on screen.

17

DVD Operation

2. LANGUAGE SETUP

The language setup options are illustrated below:

- OSD LANGUAGE: The OSD will display in the language you choose.

- AUDIO LANG: If the disc you are playing has the language you choose, it will
output audio in that language.

- SUBTITLE LANG: If the disc you are playing has the language you require you may select this either in
the Menu or using the "SUBTITLE" button on the Remote control. You may also switch this OFF.

- MENU LANG: If the disc you are playing has the language you require you may
select this.

3. AUDIO SETUP

-T21(8VHWKHŸź

button to move the scroll and adjust the tone.

RATING
The Rating feature is a rating limit feature, like movie ratings. This helps you to control what DVD the
family watches. There are 8 levels of selection, from KIDS SAFE to ADULT. Adult is the "play all" selection.

TV SYSTEM
According to the Color system of your TV, select proper TV TYPE.
PASSWORD
The password option is initialized as locked. You cannot set the ratings limit or change the password.
To enable these features you must unlock the Password. 7KHGHIDXOWSDVVZRUGLV8VLQJWKHŸ

ź

button, move the highlight to "P$66:25'SUHVVWKHŹ button and enter "0000". You will see the
padlock symbol open. You may now change the RATING or put in a new password number.
,IWKH/RFNV\PEROLV%/8(\RXPXVWSUHVVWKHŹbutton to enter the lock field, the lock symbol will change
to YELLOW, you may now enter a new 4 digit number. Please remember or write down the new Password
and keep safe.

18

DVD Operation

4. DIGITAL SETUP

The video setup options are illustrated below:

- DYNAMIC RANGE: Use WKHŸź button to
move the scroll and adjust the dynamic range.

- DUAL MONO: Choose the mode of the audio output.

- There are four modes: STEREO, MONO L, MONO R,

MIX MONO.

19

Disc Care

Disc Care

About Disc Terms

Title

Generally, pictures or music compressed on a DVD are divided into several sections, "title".

Chapter

The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one
or more chapters and each of them is numbered for easy searching, but some discs may not have a
recording chapter.

Track

A segment of picture or music on a CD, Each track is numbered for searching.

Care of Disc

Video disc contains high-density compressed data that needs proper handling.

1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.

2. Do not bend or press the disc.

3. Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.

Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from center
toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning fluids will
permanently damage the disc surface.

20

Trouble shooting

Maintenance and Service

Do not use other functions that are not mentioned in this user’s manual.
In case a problem occurs with your LCD TV, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.

noitcAmelborP

No power to TV.

Check all connections.

The screen appears too

This problem occurs for a brief time in the process of

slowly after the power is turned on.

image elimination processing in order to hide temporary screen noise

that occurs when the power is turned on. But if the screen does not

come after 1 minute contact your dealer or an authorized service

center.

Screen is too bright or too dark. Perform brightness adjustment or Contrast adjustment.

Screen is too large or too small. Adjust the screen size.

Stripes appear on the screen

Stop using wireless telephones, hair driers and electric drills.

and it shakes.

The screen does not move. Press the PAUSE button. Check if the Pause button is pressed on

external equipment.

Screen appears, Voice is not heard

1. Press the "MUTE"button.

2. Increase the sound level by pressing volume adjustment button.

3. Check if sound terminal of external input is connected properly.

4. Check if audio cables are connected properly.

5. Select and check the other input.

If the sound still does not work and the other channels are the
same after you have done as the above, contact your dealer or
an authorized service center.

Remote control does not work

1. Check if main power is On.

2. Check that the batteries of the remote controller were loaded
properly.

3. Check to see if any obstacle exists between the LCD TV and
the remote control , then remove it, if any.

4. If the batteries have no power, replace them with two new
batteries.

This LCD TV is for household use and registered as harmless on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.

21

Specifications

Maintenance and Service

22

AC 100-240V 50/60Hz 60WPower Consumption

4.60 KgWeight

TV

TV System
Screen size 19"(diagonal)
Resolution 1440x900pixels (RGB)
Aerial input 75

(unbalanced)

Audio output power

Remote control

Type
Control distance
Control angle
Batteries
Dimensions
Weight

infrared
5m
30° (horizontal)
2 x 1.5 V, size AA
48 x 168 x24 mm
70 g (without battery)

2x3 W

PAL/SECAM, BG/DK/I