Cellink BTST-9000D User Manual
BTST-9000D
236 X 123 mm
1
BTST-9000A
236 X 123 mm
Thank You ....................................................................................................
- Box content
BTST-9000D Overview .........................................................................................
Getting Start .......................................................................................................
- Charge battery
- Power On
- Plug into the audio device
- Pairing
- Volume Control
- Set volume mode
Use with mobile phone........................................................................................
- Pairing
- To make a call
- To receive a Call
- To reject a Call
Use with computer device ..................................................................................
Important Information .........................................................................................
French ..................................................................................................................
German ................................................................................................................
Spanish ................................................................................................................
Italian ................................................................................................................
Dutch ...................................................................................................................
Protugsal .............................................................................................................
CE Statements .....................................................................................................
FCC Safety Statements ........................................................................................
Warranty ..............................................................................................................
2
2
3
7
8
9
12
22
32
42
52
62
72
72
74
Table of Contents
Thank you for purchasing the Cellink BTST-9000D Bluetooth Stereo Headset. The BTST-9000D
is designed for audio device users to have a high quality stereo sound and a wireless operating
range up to 10 meters. Please read the instruction manual to make the best use of the BTSTÂ9000D. We hope you will enjoy the high quality stereo sound and power of Bluetooth wireless
technology.
1. Play on/off button
2. Volume button
3. Power switch
4. Pairing button / track wheel
5. Microphone
6. Charging port
7. Collapsible headband
8. Power adapter
9. Stereo adapte
10. Control button
- Bluetooth stereo headset
- Bluetooth stereo adapter
- Power Adapter
- User guide
Box content
BTST-9000D Overview
Thank you Getting Start
2 3
- Connect the power adapter to the T-connector.
- Connect the stereo headset and adapter to the T-connector
- Plug the power adapter into an electrical outlet.
Note:
For the first time use, it takes 4 hours to fully charge the batteries and 2 hours afterward.
With the batteries fully charged, the use time is around 6.5 hours and the standby time is
around 230 hours.
1 Charge battery
4 5
Note:
Since output voltage of audio devices varies from one to another, for users to have best sound
quality, the stereo adapter offers users 2 volume modes, high volume mode and normal mode.
- Use the power switch to turn on the power
- Plug the audio connector into the audio port of the audio device.
2 Power On
3 Plug into the audio device
- Press and hold the pairing wheel on the stereo headset for 6 seconds until the blue and red LEDs flash
alternately.
- Press and hold the control button on the stereo adapter for 6 seconds until the blue and red LEDs flash
alternately.
- Use the volume buttons on the stereo headset to adjust volume.
4 Pairing
5 Volume Control
ON
OFF
Vol+
Vol-
Normal volume mode
- Press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the
stereo adapter from the audio device.
- Single click on the control button will reconnect the stereo adapter to the audio device and set
the stereo headset to normal volume mode.
High volume mode
- Press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the
stereo adapter from the audio device
- Double click on the control button will reconnect to the stereo adapter to the audio device and
set the stereo headset to high volume mode.
Press and hold the pairing/track wheel button on the stereo headset for 6 seconds to set the stereo
headset into pairing mode. The blue and red LEDs will be flashing when the stereo headset is in
pairing mode. To properly perform pairing procedure on your mobile phone, please refer to the
manual of your mobile phone for its own pairing instruction. This device name is set to be "Bluetooth
Stereo Headset". If you are asked to enter pin-code during pairing, please enter 1234. (Note: The
"1234" is default pin-code pre-stored in this Stereo headset.)
Use with mobile phone
6 7
Note:
- For iPod, normal mode is preferred.
- For Sony PSP or Creative MP3 player and others, high volume mode is preferred.
6 Set volume mode
1 Pairing
- Dial out the number from your mobile phone.
- Voice is automatically transferred to the headset.
2 To make a call
1. When there is an incoming call, press the answer button to answer the call and the audio channel
will be switched to the mobile phone.
2. Press the Volume control button to adjust the volume.
3. When finish talking, press the answer button to end the call and the audio channel will be
switched back to the audio device.
3 To receive a Call:
- Press the reject button on the mobile phone to reject a call.
4 To reject a Call
1.5 seconds
Loading...