Celio Technology 73122 User Manual
Table of Contents
User Guide
Welcome to Your REDFLY 2
Getting Started 2
Connecting to the REDFLY for the First Time 6
Improved Productivity with the REDFLY 7
Navigating the REDFLY 7
Keyboard Shortcuts 7
Using Alt-Tab 11
Using the Touch Pad 11
Working with the Display 13
Using an external Monitor or Projector 14
Playing Video 15
Using Bluetooth 15
Using External Devices 22
Power-Saving Options 23
Uninstalling REDFLY Software 27
Troubleshooting 28
Cleaning the REDFLY 30
Customer Service 30
Warranty 30
Specications 31
Using the REDFLY Safely 31
End User License Agreement 32
Regulatory Compliance 34
1
Welcome to Your REDFLY
Meet the REDFLY—the essential Windows Mobile Smartphone Companion. The REDFLY will greatly enhance your
productivity with its larger screen and keyboard, as well as its connectivity options. Like a great assistant, the REDFLY
simplies and accelerates getting your work done.
The most important tip to keep in mind about your REDFLY is that it uses all your smartphone capabilities. This means
that moving up to the REDFLY provides strong peace of mind since you don’t have to worry about:
•Constantly synchronizing data yet again with your phone to another device
•Learning yet another set of applications, procedures, and operating system
•Protecting yet another device from viruses, malware and other threats
•Losing company or personal data on yet another device
While the REDFLY may appear similar to a sub-notebook computer, it actually simplies your workday by completely
leveraging your familiar Windows Mobile applications and interface with the easier to use REDFLY keyboard and
larger screen.
Getting Started
You will need to install REDFLY software to your Windows Mobile phone to use the REDFLY. You can choose to install:
•Over-the-Air directly to your smartphone
•From your PC with an Internet connection
•From your PC with the REDFLY Installation CD
First, open the REDFLY and remove the protective plastic lm from the display. For best results, plug in your REDFLY to the
AC adapter and allow at least 3 hours to fully charge the battery.”
For best results, plug in your REDFLY to the AC adapter and allow at least 3 hours to fully charge the battery.
OVERTHEAIR SMARTPHONE INSTALLATION
Note: Cell phone data rates will apply to this download.
1. Power on your smartphone.
2. Activate your phone’s Internet connection (whether WiFi or over the cellphone network).
3. Use your smartphone browser to go to: http://www.celiocorp.com/install.
4. Select the Over The Air Installation link and follow the on screen directions.
5. Choose “Yes” to download the le to your smartphone.
2
6. Once the le has been downloaded, follow the on screen instructions on your smartphone to complete
the installation
After installing the REDFLY software, the setup program will ask you to reset your phone:
Choose YES to complete the installation.
INSTALLING FROM YOUR COMPUTER
You can install the REDFLY software to your phone using your PC and the Internet. To do this you will need:
A. An active Internet connection.
B. Your smartphone’s USB connecting cable. (If you do not have this cable, contact your phone retailer for a replacement.)
C. Microsoft ActiveSync (or Windows Mobile Device Center for Microsoft Vista) installed on your PC.
To do the install:
1. Power on your smartphone.
2. Run ActiveSync (or Device Center). If you have not connected your phone to your PC via ActiveSync before,
please refer to your phones manual for instructions.
3. Plug your phone into your PC using the USB connecting cable. ActiveSync (or Device Center) will say “Connected”.
(If not, refer to your Microsoft documentation.)
4. Use your PC browser to go to: http://www.celiocorp.com/support/downloads/drivers/installation.htm
5. If you are downloading the REDFLY from the web site, select the Install From Your Computer link and follow the on
screen directions.
6. From the Installing From Your Computer section, click on the model and/or number of your smartphone.
7. Choose Run or Save from the dialog box to complete the installation. If you choose Save, you will need to
remember where you save it so you can run the installation later.
3
Note: The Install program also archives a copy of the REDFLY Setup program
in this directory should you need it again.
8. The Install program asks you to conrm the installation:
Choose “Next” to continue.
9. On your PC, the setup program will conrm the install:
4
Choose OK and proceed to your smartphone to complete the install.
10. On some phones, Windows Mobile will ask you for permission to run the REDFLY setup program:
Choose “Yes” to continue.
11. The setup program will conrm the install:
Select OK to close this screen and run the REDFLY setup software.
12. Select Install Drivers from the installation screen:
After installing the REDFLY software, the setup program will automatically reset your phone.
5
PC/CDROM INSTALLATION
You can install the REDFLY software to your phone using your PC and the included Install CD-ROM.
To do this you will need:
A. The REDFLY Install CD-ROM.
B. Your smartphone’s USB connecting cable. (If you do not have this cable, see your phone retailer for a replacement.)
C. Microsoft ActiveSync (or Windows Mobile Device Center for Microsoft Vista) installed on your PC.
To do the install:
1. Power on your smartphone.
2. Run ActiveSync (or Device Center) on your PC.
3. Plug your phone into your PC using the USB connecting cable. ActiveSync (or Device Center) will say your phone is
connected. (If not, refer to your Microsoft documentation.)
4. Insert the REDFLY Install CD into your PC’s drive. The Install program will automatically launch.
5. Click on the link for your type of phone from the MSI Installations link list.
6. Click “Run” to begin the installation process.
Connecting to the REDFLY for the First Time
Once you have the REDFLY software on your smartphone, you are ready to connect to the REDFLY companion.
1. Power on your phone.
2. Press and hold the REDFLY’s On/O switch for one or two seconds to power on the REDFLY.
On/O switch
3. Plug your USB connecting cable into your phone and into your REDFLY.
Your phone will automatically detect the connection to the REDFLY. It will then switch your
phone display and keyboard functions to the REDFLY. The REDFLY system tray will now show
the “connected via USB” status icon:
6
Navigating the REDFLY
Learning to navigate the REDFLY is easy as it uses typical PC keyboard and mouse actions:
•Use the REDFLY’s keyboard shortcuts to open applications
•Use the Alt-Tab feature to move between applications.
•Use the touch pad and buttons to move the cursor and select options
Keyboard Shortcuts
The REDFLY keyboard includes a variety of hot keys:
Home: This key opens
your Today menu.
Mail: This launches your
phone’s default browser.
Web: This launches the
phones default browser
Send: Acts like the Send
key on your smartphone
End: Acts like the End key
on your smartphone.
L Menu: Activates the
current application’s left
menu or option.
R Menu: Activates the
current application’s right
menu or option.
OK: Selects an onscreen
option, change, or preference
like the OK key on your phone.
Brightness Increase/Decrease:
F9 dims and F10 brightens
your REDFLY display.
External Monitor: Opens the
REDFLY Display menu. You can
then select to use a projector
or both the REDFLY screen
and a projector connected to
the VGA port.
Bluetooth: This key activates
or deactivates the REDFLY’s
Bluetooth connection with
your phone.
REDFLY: This key brings up
the REDFLY Settings screen.
HOT KEYS
The REDFLY keyboard includes a variety of hot keys to improve navigation.
L Menu and R Menu
The L Menu and R Menu keys activate the left and right menus (or options) respectively for the currently active program.
On some applications, there may be only a single option associated with the L Menu or R Menu, so pressing L Menu or R
Menu automatically performs that action. (For example, on the Incoming Call screen, the L Menu button answers the call.)
On other applications, pressing L Menu or R Menu will open a menu with a list of options. You can then use your cursor to
highlight the option you want.
7
Use Send and End to make or receive calls with the REDFLY
Making calls with your REDFLY is much like using your smartphone:
1. Press the Send Key on the REDFLY keyboard or on your phone to display the phone keypad. (You can also use your
contact manager to dial the number.)
2. Dial the number using the cursor and the touch pad.
3. Press Send.
Use your smartphone handset as normal as both the speaker and microphone are active once you press the Send key.
Press the END Key on the REDFLY keyboard or on the phone to end the call.
Again, receiving calls is much like using your smartphone:
1. The REDFLY will display the Incoming Call screen.
2. Press the SEND Key to start talking on your smartphone.
3. Press the END Key on the REDFLY keyboard or on the phone to end the call.
User-Denable Hot Keys: Home, Mail & Web
You can dene what applications your phone will launch from the REDFLY’s Home, Mail, and Web keys using the Key Map
tab in REDFLY Settings.
The REDFLY keyboard uses defaults for the three user-deneable hotkeys:
Hot Key Icon:
Home Mail Web
Default Program: Today Screen Messaging Internet Explorer
Press any of these three keys to launch the associated program (or display it if it is already running).
You may want to redene these keys. For example, you may want to use Opera Mobile as your default browser (rather
Internet Explorer) when you press the Web key. Or, you may want to use a dierent mail program or an RSS
newsfeed reader rather than Internet Explorer.
To change what these keys do:
1. Open the Start/Settings screen (Start/REDFLY Settings on non-touchscreen phones)
2. Select the System tab at the bottom of the screen (touchscreen only)
3. Select REDFLY Settings.
4. Choose the Hot Keys tab at the top of the screen:
8
5. Select the Hot Key you wish to change and click on the File Explorer button: next to this key’s program
path box. A selection box of applications appears:
6. Use this screen like you would File Explorer to locate the program you want to use. For example, suppose you want
the Web key to open the Opera Mobile Browser rather than Internet Explorer. Use this screen to go to the Programs
folder, then select “Opera Browser” in that folder.
7. When you select the program, the path to that program automatically appears in the program path box in the
Hot Keys screen.
8. Click OK at the top-right of the screen or press the OK button on your keyboard to accept this change.
When you press the redened Hot Key, the new program will now appear.
Checking Program Paths
You may not see the complete path for many programs in the Program Paths box. If you want to read the entire path, including the name of the program you’ve chosen for a particular hot key, place your cursor into the Program Path box. Use
your left and right arrow keys to move your cursor to read the entire path and program name.
Reset Hot Key Default Programs
If you want to restore the REDFLY Home, Mail, and Web keys to their original settings of the Today Screen, Messaging, and
Internet Explorer:
1. Open the Start/Settings screen (Start/REDFLY Settings on non-touchscreen phones).
2. Select the System tab at the bottom of the screen (touchscreen only)
3. Select REDFLY Settings.
4. Choose the Hot Keys tab at the top of the screen:
5. Click on the Reset to Defaults button at the bottom of the screen.
6. Choose OK at the top right-hand side of the screen, or press OK on the keyboard, to accept this change.
9
Keyboard Character Repeat Rate
A character repeats when you press and hold down a key on the keyboard. You can adjust the rate for the number of
characters using the Key Repeat Rate setting. To adjust this rate:
1. Open the Start/Settings screen (Start/REDFLY Settings on non touchscreen).
2. Select the System tab at the bottom of the screen (touchscreen only).
3 Select REDFLY Settings.
4. Choose the Input tab at the top of the screen:
5. In the Keyboard section, move the slider to your desired repeat speed.
6. Test this repeat rate in the small type-in box below the slider. Place your cursor in the box. Press and hold a key on
the keyboard.
7. Adjust the slider and retest the rate in the box to determine your optimal setting.
8. When you have this setting in the slider, click OK at the top right of the screen or press the OK button on the
keyboard to accept your changes.
Using Alt-Tab
The REDFLY software includes the ability to move between open applications by pressing the Alt-Tab keys. When you
have two or more applications loaded on your phone, you can now press Alt-Tab to move between the applications
(rather than having to choose them through the Start menu).
1. Press both the Alt and Tab keys simultaneously. This displays a dialog of the running applications:
2. Hold the Alt key down while pressing and releasing the Tab key to move through the list of running programs to
highlight the program you want.
3. Release the Alt-Tab keys to select that application.
10
Using the Touch Pad
CHANGING CURSOR MOVEMENT
You can adjust how fast your cursor moves across the screen in response to your nger’s movement on the touch pad.
To have your cursor move faster or slower in response to your touch pad:
1. Open the Start/Settings screen (Start/REDFLY Settings on non-touchscreen phones)
2. Select the System tab at the bottom of the screen (touchscreen phones only)
3. Select REDFLY Settings.
4. Choose the Input tab at the top of the screen:
5. In the Touch Pad section, move the slider to your desired speed—Slow or Fast.
6. Click OK at the top right of the screen or press the OK button on your keyboard to accept your change.
Test your new setting with your cursor and touch pad. Repeat as needed to select your preferred speed.
USING THE LEFTMOUSE BUTTON/HOLD TOUCHSCREEN USERS ONLY
For touch-screen users, you can perform the “Tap and Hold” onscreen action (used to open a submenu in various
applications) on your REDFLY with the “Left Mouse Button-Hold” action on the keyboard.
Note: Some applications also support using the right mouse button to display sub-menus.
To display an onscreen item sub-menu:
1. Point your cursor at the active link item.
2. Press and hold the left mouse button on your touch pad. The related sub-menu will appear onscreen.
3. Move your cursor to highlight the option you want in this menu and click the left-mouse button. (You can also press
the ESC key to close the sub-menu.)
Touch Pad Tap Feature
You can tap twice on the REDFLY’s touch pad to activate an onscreen selection—the same as if you double-clicked the left
mouse button.
To deactivate this feature:
1. Open the Start/Settings screen (Start/REDFLY Settings on non-touchscreen phones)
2. Select the System tab at the bottom of the screen (touchscreen phones only)
11
Loading...