Page 1
USER MANUAL
Table of Contents
1.0 Introduction……………………………………….……..……………1
2.0 Specifications……………………………………….……..…………1
3.0 Package Contents……………………………………….…….…..…2
4.0 Panel Descriptions……………………………………….………..…2
5.0 Connection and Operation………………………………….………3
Page 2
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output
１
HDMI SWITCH SPLITTER
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this product.
Please keep this manual for future reference.
1.0 INTRODUCTION
The HDMI SWITCH SPLITTER Matrix routes high definition video in multiple resolutions
up to 1080p plus multichannel digital audio from any of the four HDMI sources to two
displays. Two outputs give you the choices of sending high definition audio and video
signals up to two displays. At the same time, when you select Output A as the output,
the audio signal will be separated and transmitted to the amplifier by Stereo，Toslink or
COAX (RCA).. Any four to any two matrix switching allows for maximum versatility for
integrated systems. It eliminates the needing of disconnects and reconnects sources to
a display equipped with one input. It works with HD-DVD players, Blue Ray DVD, PS3,
and satellite set top boxes that connect to two HDMI displays. Every source is
accessible at all times by any display by selecting it with an IR remote.
1.1 FEATURES
This HDMI Amplifier Splitter has many features that enable it to perform in a superior
manner. Among those features you will find:
l Switches easily between any four HDMI sources
l Distributes any of the four inputs to any or any combination of the two HDMI output
displays
l Supports audio output simultaneously : Stereo, Toslink and Coaxial
l Supports HDMI1.3b
l Supports highest video resolution 1080p.
l Supports 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
l Supports 12bit per channel (36bit all channel) deep color.
l Supports HDCP
l Supports uncompressed audio such as LPCM.
l Supports compressed audio such as DTS Digital, Dolby Digital（including DTS-HD
and Dolby True HD）.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input Video Signal 5 Volts p-p (TTL)
Maximum Single Link Range 1920x1080P
Output Video HDMI1.3b+HDCP 1.0/1.1
HDMI Input/Output Connector Type A 19 pin
Operating Frequency
Page 3
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output
２
Vertical Frequency Range 50/60Hz
Video Amplifier Bandwidth 2.25Gbps/225MHz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Mechanical
Size(L-W-H) 258mm x 112mm x 26mm
Weight(Net) 0.73KGs
Warranty
Limited Warranty 1 Year Parts and Labor
Environmental
Operating Temperature
0 ℃ to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature
-10℃ to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5V DC@2A
Power Consumption(max) 8 W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
User Manual
Note: Specifications are subject to change without notice.
3.0 Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit.
2) 5V DC Power Supply.
3) Remote Control
4) User’s Manual.
Page 4
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output
３
4.0 PANEL DESCRIPTIONS
ToslinkCoaxialStereo
Input4
OutputA OutputB
Input1 Input2 Input3
DC/5V
SelectSelect
OutputB
1 2 3 4
Input
OutputA
4321
Input
IR
Power
Back Pamel:
Back Pamel:
Upper Pamel:
5.0 CONNECTION AND OPERATION
1) Connect the HDMI input source into this product (Input cables are optional)
*please refer to connection diagram section.
2) Insert the DC side of 5v power supply into this product and then connect the AC side
of the power supply into the wall outlet.
For this product, there are different operations for your choice
1) Press the button POWER on the product will present a status of standby or working.
2) Mechanical switching.
The button Select A can select four sources to display on the Output A device
circularly;
The button Select B can select four sources to display on the Output B device
circularly.
3) Remote control
The Power button on the remote control can control this product.
The two OFF buttons can control the output A、B separately, in order to not keep
output A/B ‘s device working
The button 1、2、3、4 can select source devices freely.
Page 5
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output
４
The Mute button will control the Audio output from Stereo, Toslink and Coaxial
Attention: Insert / Extract cable gently.
5.1 CONECTION DIAGRAM
P/N2023
Loading...