CELERWAY GO CWY-M5.1E2L2W2B, GO CWY-M5.1E2L2W2BA, GO CWY-M5.1E2L1W2B User manual

Start using

4. Go to the APN menu tab and paste
the ICCID in the empty field.

5. Ty pe th e APN i n t he AP N f ie ld ,
click Add and Restart modem(s).

6. The APN is now activated. For a
private SIM card and network, you
may be required to enter a username
and password in the APN menu tab.

1

2

3

B

Connect GO to a LTE source If the LTE 1 indicator (and LTE
2, if applicable) is illuminated, you are already connected to the
internet. If your SIM cards require special configuration:

1. Access the GO device UI.

2. In the Modems menu, enter the
SIM card’s pin code in the Pin
code field and click Unlock.

3. If the SIM card requires a special APN,
copy the ICCID number for the Modem.

About the device

Power on GO

To power on GO, press the power button to the left of the
SIM card slots, holding the button down for 5 seconds.

Connect your devices to GO

» To co nn ec t you r pe rs on al l ap top /c om pu te r t o GO by E th er ne t

cable, insert one end of the cable in the GO LAN port, and
the other end in the Ethernet port of your computer.

» To connect your personal laptop/computer or mobile phone to

GO by Wi-Fi, search on your computer for the Wi-Fi network
named CelerwayXXXXXX (where the Xs are digits/letters), and
log in to Wi-Fi with the password CelerwayXXXXXXtest (where
the Xs are the same digits/letters as in the network name).

To access the GO device user interface (UI), open a web browser
to http://192.168.5.1/basic, with the default user basic and password

celerway or new credentials provided to you by your IT administrator.

If you cannot access your device’s UI, your device may not have been
activated, and you must contact your IT administrator to activate it.

Connect GO to a Wi-Fi source If you want GO to use one or
more of the available Wi-Fi networks:

1. Access the GO device UI.

2. In the Wifi menu tab, click Scan
to see available networks.

3. Choose the network, click Select.

4. Enter the password for the
selected Wi-Fi network
and click Connect.

5. If GO successfully connects
to a Wi-FI network, it will apear in the list of available interfaces.

Mounting antennas

If you have a GO model with external antennas, mount
the antennas only when the device is powered off.

Keeping the device cool

GO is a powerful enterprise router equipped with a battery that must
be kept cool, especially under heavy use and in warm environments.
For cooling, GO has two fans that you must keep unobstructed during
operation. For more information about GO battery safety, see the
sections Normal battery usage and Observe battery safety guidelines.

Open from

this end

1. Be sure that GO is powered off.

2. Open the rubber protector covering
the SIM cards slots. When open,
the protector remains attached
to the device on the left side.

3. Insert the SIM card(s) in the SIM
card slots with the connectors
oriented to you, as illustrated.

Orient SIM

cards as shown

WARNING Celerway GO contains Lithium Ion batteries which are

potentially hazardous: make sure you and any user of Celerway GO

has read and understood the battery warnings and instructions.

Inserting SIM cards

GO uses micro-sized cellular data SIM cards that you
must install in the SIM card slots as illustrated below.

Along the length of GO are 6 LED
indicators that are illuminated when
GO is powered on, its software is
running properly, and the network
interfaces are on/connected.

Device powered ON

S/W running properly

SIM1 modem connected

SIM2 modem (for dual
modem models) connected

2.4GHz Wi-Fi radio on 5GHz Wi-Fi radio on

Connect to other

internet sources

Connect other

devices

Power button

If you press and quickly release the
power button, you can check the battery
level as indicated by the 4 LEDs under the
batter y icon. The battery is fully charged when all 4 LEDs are illuminated.

Should you need to charge GO, use only the original charging
equipment from Celerway. Stop charging GO when its battery is
fully charged. For more information on charging GO safely, see
Normal battery usage and Observe battery safety guidelines.

Charge GO

Charge other

devices

Batter y level

GO has two Ethernet ports: a

WAN port for connecting GO to

a local wired internet source, and

a LAN port for connecting your

laptop or other devices to GO.

3

A

3

C

Connect GO to a Wi-Fi source behind login portals

Repeat steps 1 and 2 from the section above, then:

3. For the selected network,
click Continue WiFi Login.

4. You will be redirected to
the login portal of the WiFi.
Click Continue to accept
the warning and proceed to
complete the por tal login.

*This device must be activ ated before use. For detailed

instructions, please refer to the Activ ation Guide.

the device is in compliance with the essentia l
requirements of Radio Equipment Directive
2014/53/EU and RoHS2 Directive 2011/65 /EU.
Detailed information and specifications can
be found in Nimbus management system.

Recycling And Environmental Information To
find information on how to responsibly recycle
Celerway products, please consult national
regulations on how to recycle electrical waste.

Open Source Software This product contains
software distributed under one or more open
source licenses. For more information on this
software, including licensing terms and your
rights to access source code, read open source
documentation in the Nimbus management
system or contact [e-mail].

Warrant y Information Celerway warrants this
product against defect s in materials and workmanship
to the original purchaser (or the first purchaser in the
case of resale by an authorized distributor) for a period
of one (1) year from the date of shipment. This warranty
is limited to a repair or replacement of the product, at
Celerway ’s discretion as purchaser’s sole and exclusive
remedy. Celerway does not warrant that the operation
of the device will meet your requirements or be error
free. Within thirty (30) days of receipt should the
product fail for any reason other than damage due
to customer negligence, purchaser may return the
product to the point of purchase. Any other return
will be subject to Celerway’s existing return policy.

LIMITATION OF CELERWAY LIABILITY The
information contained in this guide is subject to change
without notice and does not represent any commitment
on the part of celerway or its affiliates. Celer way and
its affiliates hereby speci fically disclaim liability for any
and all: (a) direct, indirect, special, general, incidental,
consequential, punitive or exemplar y damages,
including without limi tation for loss of profits or
revenue or of anticipated profit s or revenue arising out
of the use or inability to use the device, even if celer way
and/or its affiliates have been advised of the possibility
of such damages, and even if such damages are
foreseeable; or (b) claims by any user of the device or
any third party, whether in contract or in tort, including
product liability. Notwithstanding the foregoing,
in no event shall the aggreg ate liability of celerway
and/or its affiliates arising under or in connection
with the device, regardless of the number of events,
occurrences, or claims giving rise to liability, exceed
the price paid by the original purchaser of the device.

Privacy Celerway collects general data pertaining to
the use of Celerway products via the Internet including,
by way of example, IP address, device ID, etc. To review
Celerway ’s privacy policy and GDPR statements,
please visit the Nimbus management system.

Other Binding Documents, Trademark s and
Copyright B y activatin g or using your devi ce,

you agree to be bound by Celerway’s Terms of
Use, User License and other Legal Policies, all
as posted in the Nimbus management system .
Please read these documents carefully.

FCC ID: 2AW69 -CLWGO WARNI NG This device
complies with part 15 of the FCC Rules. Operation
is subject to the condition that this device does
not cause harmful inter ference (1) this device may
not cause harmful inter ference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.

Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

NOTE This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reas onable protection against
harmful inter ference in a residential installation.
This equipment generates, uses and can radiate
radio frequenc y energy and, if not installed and
used in accordance with the instruc tions, may cause
harmful inter ference to radio communications.
However, there is no guarantee that inter ference
will not occur in a particular installation.

If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between
the equipment and receiver.

• Connect the equipm ent into an outlet
on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced
radio/TV technician for help.

To m ai nt ai n c omp li an ce wit h F CC ’s RF Ex po sur e
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.

IC ID: 26366-CLWGO WARNING Th is device complie s
with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) T his d evi ce m ay n ot c ause int erf eren ce, and
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.

Observe battery safety guidelines

» To avoid damaging the battery, do not charge

it for more than 10 hours continuously.

» Stop using the battery if its case appears

damaged, swollen, or compromised.

» Do not expose batter y or the device to

fire or a heat-generating environment
such as space heater, cooking surface,
iron, radiator, or fireplace.

» Do not expose the batter y or the device

to moisture or liquids. While the device
may appear to dry and operate normally,
undetected moisture could corrode the
circuitry and eliminate safety mechanisms.

» Do not crush, puncture, deform, or

put excessive pressure on the battery,
which could cause an internal short
circuit and result in overheating.

» Avoid dropping the device on a hard surface,

which could damage the battery and the
device. If you suspect either the battery or the
device has been damaged, have it replaced.

» Do not disassemble or modify batteries,

and do not use a batter y for anything
other than its intended purpose.

» Do not allow the battery to come in

contact with metal objects such as
coins, buttons, jewelry, or tools.

Use approved batteries and chargers

» Use only manufacturer-approved batteries

and accessories, purchased from a reputable
dealer, with your Celerway device. Use
of non-approved batteries, products, or
accessories will void your device warranty.

Dispose of batteries properly

» Handle batteries with caution, and

dispose of old batteries and equipment in
compliance with your local government
authority’s regulations for disposal
and recycling of batteries, cell phones,
and other electronic waste.

» Do not dispose of batteries by

burning them in a fire.

SAFETY AND HAZARDS This equipment is
designed to operate in ambient temperatures
up to 50°C. When operatin g in elevated
ambient temperatures, the surface of the
equipment may exceed 60°C and become too
hot to safely touch. Under this condition, this
product must be installed in a secured location
that is not accessible to accidental touch,
and access to the device must be restricted
to service persons or users who possess the
proper tool or key to access the device and
have been informed abou t the potential high
surface temper atures and instructed on how
to safely handle and/or ser vice the device.

Under no circumstances should the device
be used in any areas or near any equipment
which may be susceptible to any form of
radio interference, and that might cause
damage to proper ty or persons. In such
areas, the device MUS T BE POWERED OFF
AT A LL TIM ES (sin ce the dev ice ot her wi se
could tran smit signals that migh t interfe re
with such equipment). In addition, under no
circumstances should the device be used in
any aircraft , regardless of whether the aircraft
is on the ground or in flight. In any aircraf t,
the device MUST BE POWERED OFF AT ALL
TIMES (since the device otherwise could
transmit signals that might interfere with
various onboard systems on such aircraft).
Furthermore, under no circumstances should
the device be used by the driver or operator
of any vehicle. Such use of the device will
detract from the driver’s or operator ’s control
of that vehicle. In some jurisdictions, use of
the device while driving or oper ating a vehicle
constitu tes a civil and/or crimina l offense.

Due to the nature of wireless communications,
transmission and reception of data by
the device can never be guaranteed, and
it is possible that data communicated or
transmitted wirelessly may be delayed ,
corrupted (i.e. , contain errors), or totally lost.
The device is not intended for, and Celerway
recommends the device not be used in any
critical applications where failure to transmit
or receive data could result in proper ty
damage or loss or personal injury of any kind
(including death) to the user or to any other
party. Celer way expressly disclaims liabilit y for
damages of any kind resulting from: (a) delays,
errors, or losses of any data transmitted or
received using the device; or (b) any failure of
the device to transmit or receive such data.

Information For Europe, Declaratio n
Of Compliance Celerway declares that

User Guide

CELERWAY GO MODELS: GO CWY-M5.1E2L2W2B
GO CWY-M5.1E2L2W2BA, GO CWY-M5.1E2L1W2B

Release 1.1 © 2020 Celerway Communication AS

[e-mail]

*THIS DEVICE MUST BE ACTIVATED BEFORE USE. For

detailed instructions, please refer to the Activation Guide.

Welcome to Celerway GO, the most powerful and

compact remote work product in the world. GO

uses multiple networks at the same time to give

you a secure internet connection from anywhere,

without the need for an external power source.

This guide will show you how to connect your GO

device to the internet, and then connect your devices,

such as company laptop and mobile phone, to GO.

Normal battery usage

» Charge the battery at room

temperature: 68°F to 79° F (20°C
to 26°C). If battery temperature
exceeds 113°F (60°C), charging
may be disabled temporarily. If the
battery is hot but under 113°F (60°C),
it will charge more slowly than usual.

» It is normal for the battery

to become warm while
charging and discharging.

» The battery should be kept in a cool,

dark, and dry environment. Avoid
storing your device in direct sunlight
or vehicles parked outdoors.

» Use the adapter and USB cable

that came with your device.

» Use the latest firmware

in your device and check
for updates regularly.

» A heavy workload, such as

streaming large amounts of data,
consumes more battery power
and causes the battery to run
at a higher temperature than
normal or light workloads.

» Over time, all batteries degrade

and lose charge capacity and
must be replaced eventually.
Replace the battery if it does not
charge or discharges far more
quickly than when it was new.

For other configuration options, such as setting cellular data quotas and
using GO to provide local Wi-Fi, refer to the documentation at http://nimbus.

celerway.com/public. Note that a complete Admin router UI can be accessed

at http://192.168.5.1, with the default username admin and the password

celerway or new credentials provided to you by your IT administrator.

WARNING Rechargeable Lithium Ion batteries are potentially ha zardous

and can present a serious FIRE HAZARD if damaged, defective or improperly

used. This product is only to be installed and used by qualified personnel!

5. If the login is not successful
for any reason, click Abort
WiFi login to abort the
process to enable Internet
connectivity again.

6. If GO successfully connects to a Wi-FI network, it
will apear in the list of available interfaces.

Connect GO to a wired internet source

To co nn ec t GO to a lo ca l wi re d i nt er ne t so urc e, i ns er t on e
end of an Ethernet cable in the WAN port, and the other
end in the internet source. The WAN LED indicator on
the length of the device should now be illuminated.

3

D

3

C

User Guide

FOR CELERWAY GO

GO CWY-M5.1E2L2W2B, GO CWY-

M5.1E2L2W2B, GO CWY-M5.1E2L2W2B

1