CEI 510 ULTRAK User Manual

SOCCER WATCHSOCCER WATCH

INSTRUCTION MANUALINSTRUCTION MANUAL

FEATURES:-FEATURES:-

Fig.1

• hour, minute, second, month, date, weekday, and alarm (user option day alarm)

• auto calendar

• soccer timer and stoppage timer to keep track of stoppage time

• presettable timer with range 99minutes

• electro-luminescent backlighted LCD

• 12/24 hour display and month/day reversal by user option

NORMAL DISPLAYNORMAL DISPLAY
The normal display is as shown in Fig. 1. In this display, the hour, minute and second are
shown on the lower row. The month, date and weekday are shown on the middle row and
the alarm hour and minute are shown on the top row.

TIME SETTINGTIME SETTING
When the watch is in the NORMAL display, pressing and holding B for 2 seconds allow us
to go into the TIME SETTING mode with the SEC digits flashing. Pressing A will reset the
SEC to 00 and start again right away. Press C to select sequentially HOUR, MINUTE,
YEAR, MONTH, DATE, and 12/24HR. When the digits are selected, they flash, press A to
advance these selected digits. When the setting is completed, press B to complete the
TIME SETTING and the display will return to the NORMAL DISPLAY. (When the 12/24HR
is set to 12 hr, the time will be displayed in 12 hour system with the middle row displayed in
MONTH, DATE and WEEKDAY. When it is set to 24hr, the time will be displayed in 24 hour
system with the middle row displayed in DATE, MONTH and WEEKDAY, as shown in
Fig.2)

Fig. 2. 24hr system

ALARMALARM
From NORMAL DISPLAY, press C to display the ALARM time, as shown in Fig.3.

Fig.3. Alarm Time Display

Press and hold B for 2 seconds to go into the ALARM SETTING mode with the ALARM
HOUR digits flashing. Press A to set the ALARM HOURS. Press C to select sequentially
ALARM MINUTES, MONTH and DATE and press A to advance. Press B to complete the
settings. When the digits are selected, they flash. When the month or date is not set
(remain - - - - ), the alarm will sound everyday at the preset alarm time. When the month or
date is set, the alarm will sound only at the preset time at that preset date or month. When
the digits have been advanced, the alarm is automatically armed. Pressing A in the ALARM
mode will enable or disable the alarm. When the indicator at the top left corner is ON,
this means that the alarm is enabled.
When the normal time matches the ALARM time, the alarm sounds 30X2 short beeps.
When the alarm sounds, we can stop it by pressing any buttons.

SOCCER TIMERSOCCER TIMER
From the ALARM time display, press C to go into the SOCCER TIMER display mode, as
shown in Fig. 4.

Fig.4. Soccer Timer Mode