CEI 485 ULTRAK User Manual

ULTRAK 485 60 - Memory Version
ULTRAK 493 300 - Memory Version
ULTRAK 494 EL Version
OPERATING INSTRUSTIONS

FEATURES:

SPECIAL MECHANICAL FEATURES:

- Mechanical Lock for stop Button

- Battery Hatch back, open by the rope holder

CHRONOGRAPH

- Display of Lap, split and running chronograph.

- Measure up to 9 hours 59 minutes and 59.99 seconds.

- 300 recallable lap and split memories for ULTRAK 493 and 494; 60-memory for ULTRAK 485.

- display of fastest (FS), Slowest (SL) and average (AV) lap times for the laps traversed.

- lap counter (00-999).

- Electro-Luminescent backlighted LCD in ULTRAK 494 only.

TIMER:

- Presettable countdown timer, maximum 10 hours.

- Automatically recycles upon completion of countdown and cycle counter to keep track of cycles
counted.

- 30 seconds shuttle-countdown for timeout period timekeeping.

PACER:

- Presettable from 10 beeps/minute to 320 beeps/minute.

- Display of pacer frequency, beep counter and total time elapsed simultaneously.

CLOCK:

- Hour, minutes, seconds, month, date, day and year, auto calendar.

- Alarm hour and minutes.

- 12/24 hour and European calendar user option.

CHRONOGRAPH OPERATION

- Depress C to select the operating mode. The chrono indicator is
shown. Depress A to start.

Remarks: user may move the lever, at the back of button A, to
prevent accidental stop of the running chronograph.

- Depress B to read the 1st Lap time. LAP is shown at the upper
row, SPLIT is shown at the middle row and the RUNNING
CHRONO is shown at the bottom row.

- Depress B to display the 2nd Lap time. The 2 digit in dot matrix
format at the top left corner is the Lap counter.

1

- Depress A to stop counting.

Remarks: make sure the button is unlocked before the operation.

- Depress D to recall 1st Lap data (memory can be recalled
anytime when the chronograph is either running or stopped).

- Depress D again to recall the 2nd Lap data.

- Depress D again to recall the stopped time.

- At any time during the RECALL mode ....

- Depress A will display the average (AV) Lap time of the Laps
traversed.
Remarks: if lap counter is > 999 or either Lap/aplit is grater than
9H 59M 59.99S, the AV information will be disabled, AV- - - - - - ­ will be displayed.

- Depress B will display the slowest (SL) Lap time of the Laps
traversed.

B

- Depress B will display the fastest (FS) Lap time of the laps
traversed. Repeated depression of B will display the fastest and
slowest Lap times alternately.

- Another depression of the C button will return the chrono to the
stopped status. (Depression of C at any time during recall mode
serves the same purpose.) Depress A to restart counting or B to
reset all memories.

Remarks: the stopwtch can recall the last lap and lap data
entered before the memory capacity used up.

2