Cecotec CCTE020420 User Manual
2006/42/EU
and
amendments
Directive of the European Parliament and of the Council of 17 May 2006
on machinery, and amending Directive 95/16/EC (recast).
2014/30/EU
and
amendments
Directive of the European Parliament and of the Council of 26 February
2014 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility.
2011/65/EU
and
amendments
Directive of the European Parliament and of the Council of 8 June 2011
on the restriction of the use of certain hazardous substances in electrical
equipment.
EU DECLARATION OF CONFORMITY
Id. Number: CCTE020420
Manufacturer or representative: CECOTEC INNOVACIONES S.L
Address: C/ DE LA PINADETA, s/n 46930 Quart de Poblet (VALENCIA) - SPAIN
Declares under our responsibility the conformity of the product:
Brand: BONGO
Description: ELECTRIC SCOOTER
Models: _______________ See attached list
with the following European Directives:
Further information regarding compliance with these Directives is given in the annex which
constitutes a part of this declaration.
Date of signatures: 14/4/2020
Signed by:
Daniel Serrano Rodríguez
DNI: 19002106-N
Engineering Department Director
EN ISO 12100:
2010
Safety of machinery - General principles for design - Risk
assessment and risk reduction.
EN 60335-1:2010
Household and similar electrical appliances – Safety – Part 1:
General requirements.
EN 60335-1:2012 +
A11:2014+A13:2017
Household and similar electrical appliances – Safety – Part 1:
General requirements.
EN 61000-6-3:
2007+A1:2011
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards Immunity standard for residential, commercial and light-industrial
environments
EN 61000-6-3:
2007+A1:2011
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial
environments
EN 62471:2008
Photobiological safety of lamps and lamp system
EN 14619:2015
Roller sports equipment - Kick scooters - Safety requirements and
test methods.
EU DECLARATION OF CONFORMITY
Annex
Id. Number: CCTE020420
The following harmonized standards have been applied including other
technical specification:
Date of signatures: 14/4/2020
Signed by:
Daniel Serrano Rodríguez
DNI: 19002106-N
Engineering Department Director
Loading...