Cecilware TSG-2G User Manual
SPARE PARTS LIST FOR SANDWICH GRILLS
THE
9
5
4
6
2
6
1
ITEM # PART # DESCRIPTION
1 01500 Thermostat – All TSG – ELG
7
8
3
OPERATION MANUAL
TSG-1G (All Grooved Surfaces)*
TSG-1F
ELG-1G
ELG-1F
* Available with timer – Add Suffix “T” (not shown)
† Not shown
(All Flat Surfaces)*
(All Grooved Surface) †
(All Flat Surface) †
SANDWICH
“PANINI”
GRILL
2 01501 Thermostat Knob – All TSG – ELG
3 01502 Right Lifting Spring – TSG-2 (Only)
3 0515 Right Lifting Spring – TSG-1 (Only)
4 01503 Left Lifting Spring – TSG-2 (Only)
4 01514 Left Lifting Spring – TSG-1 (Only)
5 01504 Upper Element – 120V – TSG-1 (Only)
5 01506 Upper Element – 230V – TSG-2 (Only)
6 01505 Lower Element – 120V – TSG-1 – ELG-1
6 01512 Lower Element – 230V – TSG-2 – ELG-2
7 01507 Pilot Light – All 230V – TSG-2 – ELG-2
7 01516 Pilot Lights – 120V – TSG – ELG
8 01508 Feet – All TSG’s
9 01509 Top Plate Handle – TSG-1 (Only) (Long)
9 01511 Top Plate Handle – TSG-2 (Only) (Short)
TSG-2G (All Grooved Surfaces)*
TSG-2F
(All Flat Surfaces)*
ELG-2G (All Grooved Surface) †
ELG-2F
ELG-2F/G
* Available with timer – Add Suffix “T” (not shown)
† Not shown
(All Flat Surface) †
(Flat/Grooved Surface) †
TSG-1G
TSG-2G
Not Shown 01510 Terminal Block – All TSG’s
Not Shown 01513 Grill Brush
CECILWARE CORPORATION
43-05 20th Avenue • Long Island City, NY 11105
Tel: 800-935-2211 • Fax: 718-932-7860
1/7/02
GENERAL SPECIFICATIONS
MODEL SURFACES GRIDDLE
AREA
TSG-1G
ELG-1G
TSG-1F
ELG-1F
TSG-2G
ELG-2G
TSG-2F
ELG-2F
Grooved 14½” x 10” 15” x 12½” x 7” 120/60/1 13 Amps
Flat 14½” x 10” 15” x 12½” x 7” 120/60/1 13 Amps
Grooved 19¾” x 11” 20¼” x 12½” x
Flat 19¾” x 11” 20¼” x 12½” x
DIMENSIONS
(W x D x H)
7”
7”
ELECTRICAL NEMA PLUG
TYPE
5-15P 53 lbs.
1800 Watts
6-15P 53 lbs.
1800 Watts
230/60/1 7 Amps
3450 Watts
230/60/1 7 Amps
3450 Watts
6-20P 69 lbs.
6-20P 69 lbs.
SHIP
WEIGHT
INSTALLATION
1. SETTING UP THE GRILL
The grill must be placed on a table or work area suitable for its overall dimension. Make sure
workspace is properly ventilated and free from combustible material.
2. ELECTRICAL CONNECTIONS
The grill is equipped with its own power supply cord.
ELECTRICAL CIRCUIT DIAGRAMS FOR TSG-2G AND TSG-2F BOTTOM ELEMENTS
R1 –R2 –R3 –R4 = RESISTORS
LS = PILOT LAMP
T1 – T2 = THERMOSTATS
M1 – 3 = TERMINALS
R1 R2
W LS LS W
• •
R3 R4
W T1 • • T2 W
• 1 2 • 3 • G • 1 • 2 • 3 •
• 2• 3• G• 1• 2• 3• G•
1
TERMINAL BOARD
CONNECTION 220 / 240V
N F
ELECTRICAL CIRCUIT DIAGRAMS FOR TSG-2G AND TSG-2F TOP ELEMENTS
R1 –R2 –R3 –R4 = RESISTORS
LS = PILOT LAMP
T1 – T2 = THERMOSTATS
LS LS
• •
R1 R2
W T1 • • T2 W
• 1 2 • 3 • G • 1 • 2 • 3 •
• 2• 3• G• 1• 2• 3• G•
1
TERMINAL BOARD
CONNECTION 220 / 240V
N F
ELECTRICAL CIRCUIT DIAGRAMS
FOR TSG-1G AND TSG-1F ELEMENTS
R1 LS
W •
R2
W T1 •
• 1 2 • 3 • G •
• 2• 3• G•
1
F N
TERMINAL BOARD
CONNECTION 120V
3. USE OF GRILL
Prior to using grill make sure all the protective vinyl coating has been removed from stainless
steel body. Make sure thermostat is in the off position. Plug unit into proper outlet. Turning
thermostat knob in a “clockwise” direction will turn unit on and start heating process. Pilot Light
will go out when grill surfaces have reached proper temperature. It is normal for grill surfaces to
smoke when first using unit. Smoke will disappear in 15 – 20 minutes. Place items to be
cooked on grill surface and carefully lower top onto food. Do not force. Cooking time will vary
dependent on density of items cooked.
4. GENERAL CLEANING
A brush has been included for the cleaning of the grill. Cleaning is easiest when grill is hot.
Never pour cold liquids on hot grill surface. This will cause grill plate to crack.
Loading...