PANINI / SANDWICH GRILL
SG-1SG
SG-1SF
SG-1LG
SG-1LF
SG-2LG
SG-2LF
Single, Single Plus & Double Models
OPERATION MANUAL
SG-1SG Shown
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295 ■
718-932-1414 FAX 718-932-7860 www.cecilware.com
NN55A 5/05
1
TABLE OF CONTENTS
Introduction .......................................................... … page 2
Packaging ............................................................. … page 2
Installation .............................................................. … page 2
Operation .............................................................. … page 3
Cleaning, Care and Maintenance ............................ page 3
Safety ........................................................................ page 3
Trouble Shooting ..................................................... page 4
Compliance ............................................................... page 5
Electrical Diagram .................................................... page 5
Explosion View ......................................................... page 6-7
Spare Part List ...................................................... …..page8
Specifications ............................................................. page 9
2
Introduction
Congratulations on the purchase of your Cecilware Panini Sandwich Grill. Please take a few moments
to carefully read through this manual to ensure that the machine is operated and maintained properly.
This will enable the best possible performance from this product for many years.
Cecilware will not accept liability for the following if:
* The instructions in this manual have not been followed correctly.
* Non-authorized personnel have tampered with the machine.
* Non-original spare parts are used.
* The machine has not been handled and cleaned correctly.
Packaging
Cecilware prides itself on quality and service, ensuring that at the time of packing, all products are
supplied fully functioning and free of damage.
Provided in this package are the following:
* Contact Grill
* Drip Tray
* Manual
Should you find any damage as a result of freight, please contact your Cecilware dealer immediately.
Installation
Remove the Cecilware Panini Sandwich Grill from the packaging. Be certain all protective plastics and
residues are thoroughly cleaned from its surface.
Place the Panini Sandwich Grill on a firm level surface.
Local standards and regulations should be consulted in order to abide by standards set in relation to
positioning, spacing and ventilation. Cecilware recommends that you allow no less than 4” ventilated
gap around the perimeter of this unit. Common sense and initiative should be used when choosing the
position and operation of this product.
Caution:
Do not position or operate near combustible materials or flammable objects.
Once your Panini Grill has been placed into position, be sure that the stainless steel waste tray is
correctly positioned.
Supply the appropriate power and connect to source; your Panini Sandwich Grill is now ready to turn
on and operate. (For power supply, please see technical specification sheet, page 9)
Preparing the cooking surface:
Be sure the cooking surface is clean; then simply turn the unit on and apply a generous amount of oil to
the plates. Using the thermostat, set the grill to 230º F; once the grill has reached the desired
temperature, switch off and wipe the plates clean of excess oil.
Caution: The grill and oil will be HOT!!!
3
Operation
Your Panini Sandwich Grill should be turned on prior to usage to allow the cooking surface to warm up;
5 minutes is sufficient for preheating.
To get efficient use out of this unit while in intermittent use, it is recommended that the grill plates
remain closed and that the thermostat is turned down, when not cooking. This will assist in reducing
power consumption and also allow for quicker heat response when needed.
Cecilware recommends that the cooking surface be lightly greased before each use.
A temperature setting of between 390º F and 430º F will be sufficient for general cooking. This may
vary for particular food types, individual needs, or experience.
Simply place the food product on the bottom grilling surface, lower the top plate down, and cook to your
needs.
Cleaning, Care and Maintenance
Switch the power off and disconnect from the power source.
*The Panini Sandwich Grill should be cleaned regularly throughout use, and thoroughly
cleaned after each meal preparation. Regular cleaning will result in easier cleaning. Correct
preparation of the cooking surface when first used, will assist in keeping the plates clean.
*For best results, clean the plate while still warm using warm soapy water, A nylon cleaning cloth can
be used, but it is recommended that scrapers such as steel wool etc., be avoided, as they will damage
the plates. Do not use cold water on warm plates; a bucking effect may occur.
*When scrubbing the plates, do not clean too thoroughly. If you do, you may have to prepare the
cooking surface again before use.
*Remove drip tray from unit and discard waste. Clean in hot soapy water.
*The remainder of the griddle can be cleaned with a damp cloth using hot, soapy water.
*Warm soapy water is recommended for cleaning; strong cleaning agents may damage stainless steel.
Safety
A Cecilware Recommended Qualified Service Technician should carry out repairs if necessary. Do not
remove any components or service panels on this product.
*During operation, the Panini Sandwich Grill reaches high temperatures on the cooking surface, which
in turn heats the stainless steel surfaces. To eliminate accidents, use the black handles when in contact
with the grill.
*Switch off power to and disconnect from the power supply when cleaning.
*Allow the Contact Grill to cool down after use before dismantling for cleaning; the unit will still be too
hot to handle immediately after use.
*Do not immerse unit in water or use hose to clean.
*If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service
Technician in order to avoid a hazard.
4
Trouble Shooting
Contact Grill
SG-1SG, SG-1LG, SG-1LF, SG-2LG
Problem
Cause
Remedy
The unit is not working
and the indicator light
is not on.
1. Mains power supply.
1. Check mains power supply.
2. Power switch has not
been turned on.
2. Check the unit is correctly plugged in
and turned on.
3. On/off switch is faulty
3. Call service agent or qualified
technician.
4. Plug and lead are
damaged.
4. Call service agent or qualified
technician.
5. Internal wiring fault.
5. Call service agent or qualified
technician.
The unit is heating but
the indicator light is
not on.
1. The indicator bulb has
blown.
1. Replace the indicator light: call a
service agent or qualified technician.
Indicator light is on but
the unit is not heating.
1. Faulty element(s).
1. Call service agent or qualified
technician.
2. Operation of
thermostat.
2. Ensure that the thermostat is set
correctly, also ensure the dial is not
spinning on the thermostat and giving
the wrong reading.
3. Faulty thermostat.
3. Call service agent or qualified
technician.
Slow heat up of the
cooking surfaces.
1. Carbon builds up.
1. Ensure that the plates are kept clean
and free of carbon build up.
2. Thermostat setting.
2. Ensure that the thermostat is set
correctly, also ensure the dial is not
spinning on the thermostat and giving the
wrong reading.
3. Faulty element(s).
3. Call service agent or qualified
technician.
If your Cecilware Panini Sandwich Grill does not operate, please check the following before placing a
service call.
Please ensure:
* Correct power supply.
* The machine is plugged in correctly and power is switched on.
* The thermostat is in the correct position.
Note: All Cecilware products are tested prior to packing.
5
Compliance
Cecilware products have undergone strict product testing in order to comply with regulatory standards
and specifications set by international, independent, and federal authorities.
As testimony to such compliance, Cecilware products carry the following marks/symbols:
Electrical Diagram
Model: SG-1SG, 1LG, 1LF,1SF
SG-2LG, 2LF
The above circuit diagram has been provided to assist qualified technicians. A Recommended
Qualified Service Technician should carry out repairs if needed. Do not remove any components or
service panels on this product.
6
Explosion View
SG- 1SG
SG – 1LF
7
SG – 1LG
SG – 2LG
8
Spare Parts List
SG-1SG/SG-1SF
SG-1LG/SG-1LF
SG-2LG/SG-2LF
No.
Description
QTY
Part NO.
QTY
Part NO.
QTY
Part NO.
1
TOP COVER (LID)
1
NA
1
NA
2
NA
2
MAIN HANDLE (LARGE)
1
08068
1
08062
2 08080
3
ELEMENT FIXING PLATE (UPPER)
1
NA
1
NA
2
NA
4
REAR SPRING COVER (SHEET
METAL)
1
NA
1
NA
2
NA
5
HEATING ELEMENT (UPPER)
1
08069
1
08063
2 08081
6
CAST PLATE (UPPER)-flat
CAST PLATE (UPPER)-rib
1
NA
1
NA
2
NA
7
CAST PLATE (LOWER)-flat
CAST PLATE (LOWER)-rib
1
NA
1
NA
1
NA
8
HINGE 1 08070
1
08064
2 08082
9
PLATE CONNECTING SPRING
1
08074
1
08074
2 08074
10
HEATING ELEMENT (LOWER)
1
08071
1
08065
2 08083
11
INSULATION CLAMP (LOWER)
1
NA
1
NA
1
NA
12
MAIN BODY (BODY WRAP)
1
NA
1
NA
1
NA
13
CORD AND PLUG
1
08055
1
08047
1 08047
14
CERAMIC TUBE (INSULATOR)
3
08077
3
08077
5 08077
15
INSULATION （LOWER）
1
NA
1
NA
1
NA
16
BASE PLATE (LOWER)
1
NA
1
NA
1
NA
17
FEET 4 08075
4
08075
4 08075
18
THERMOSTAT
1
08078
1
08078
2 08078
19
THERMOSTAT DIAL
1
08041
1
08041
2 08041
20
PILOT LIGHT
1
08032
1
08067
2 08067
21
ON/OFF SWITCH
1
08054
1
08054
2 08054
22
DRIP TRAY (GREASE TROUGH)
1
08072
1
08066
1 08084
23
ELEMENT FIXING PLATE (LOWER)
1
NA
1
NA
2
NA
24
SMALL HANDLE (FRONT)
1
08076
1
08076
2 08076
25
INSULATION CLAMP (UPPER)
1
NA
1
NA
2
NA
26
INSULATION （UPPER）
1
NA
1
NA
2
NA
27
ADUSTABLE BRACKET SCREW
1
08088
1
08088
2 08088
28
ADUSTABLE BRACKET
1
08087
1
08087
2 08087
29
SPRING 1 NA
1
NA
2
NA
*NA = not available except by special order.
9
Specifications
Model
Voltage
Power
(watts)
Dimensions (inches)
W×D×H
Grill Type
Top
Bottom
SG-1SG
120V
50/60Hz
1800
11 3/8”×15 3/8”×9 1/8”
Grooved
Grooved
SG-1SF
Flat
Flat
SG-1LG
240V
50/60 Hz
2400
16 1/8”×17 1/2”×9 1/4”
Grooved
Grooved
SG-1LF
Flat
Flat
SG-2LG
240V
50/60 Hz
3200
18 3/4”×15”×9 1/8”
Grooved
Grooved
SG-2LF
Flat
Flat
CECILWARE CORPORATION
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295 ■
718-932-1414 FAX 718-932-7860 www.cecilware.com
Loading...