Cecilware IWC-25A User Manual

Download

OPERATION MANUAL

IWC-25A INDUCTION WOK COOKER

240V, 60Hz, 2.5KW

Cecilware Corporation

43-05 20th Avenue

Long Island City, NY 11105

Tel: 800.935.2211, 718.932.1414

Fax: 718.932.7860

Technical Support

Tech.Support@cecilware.com

Customer Service:

Customer.Service@cecilware.com

www.cecilware.com

USE AND CARE INSTRUCTIONS – IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE OPERATING UNIT

1. Use a dedicated

240V electrical circuit.

2. DO NOT block the air-intake panel; block ing m ay ove r he at the unit.

3. To ensure cookware compatibility we recommend using any metal wok pan tha t attracts

magnets such as steel or cast iron.

4. The induction wok cooker itself does not produce heat dur i ng cooking ; ho we ver , the heat from the wok will leave the ceramic surface hot!

5. Heating an empty wok will automatically activate the Over Heating Protection Device and the induction wok cooker will stop heating temporarily.

6. Place the induction wok cooker on a horizontal surface and at least 4” away from the wall or other objects for proper ventilation.

7. DO NOT place any objects or tools in the air-intake panel. Doing so m ay cau se an electr ical shock.

8. To protect against an electrical shock, DO NOT immerse the unit, the cord or the plug in or near water or other liquids.

9. Close supervision is necessary when the induction wok coo ker is u s ed n ear ch ild r en .

10. DO NOT operate the induction wok cooker if it has been damaged in any manner or if t he u nit

malfunctions. Return the unit to the nearest authorized service facility for examination or repair.

11. The use of any accessories not recommended by the manufactur er may cause inj ur ie s.

12. Keep the power cord away from heat.

13. DO NOT place the induction wok cooker in, on or near open flames, electric bur n er s, hea ted

ovens or other high temperature surr o un din gs.

14. DO NOT heat any sealed cans on the induction wok cooker. A heated can may explode.

15. DO NOT move the induction wok cooker while cooking.

16. After the induction wok cooker has cooled down, unplug the cord and clean as follo ws:

CERAMIC PLATE BODY

: wipe the control panel with a soft cloth or use a mild cleaner.

: wipe with a damp cloth or use a mild, non-abrasive cleaning solu tion .

17. DO NOT use induction wok cooker for other than intended use.

18. Unplug when not in use.

19. When storing, DO NOT place objects on top of the induction wok cooker.

SAVE THESE INSTRUCTIONS!!!

BUILT-IN SAFETY DEVICES Overtime Detector

If wok pan is left on the induction wok cooker for more th an 2 hours, or if the user does not operate any functions for more than 2 hours, the induction wok cooker will automatically shutoff.

Automatic Safety Shut-Off

If the induction wok cooker is le ft on for mo re than 60 seconds wit hout a wok p an in place, the unit will automatically shutoff.

Material Compatibility Detector

If the wok-pan material or dimensions aren’t suitable for this induction wok cooker, the Heating Indicator Light won’t light-up.

Small Object Detector

The induction wok cooker will not recognize any objects or utensils smaller than 2” (5 cm) in diameter. For best results, please use the recommended 13.78” (35 cm) multi-ply wok-pan which can be purchased from your induction wok supplier or Cecilware .

Overheating Protection Device

If the woks temperature becomes too high, the Over Heating Protection Device is activa t ed & the induction wok cooker may stop heating. The unit will work normally again after the temperat ure is reduced.

HOW DOES YOUR INDUCTION WOK WORK?

A high frequency (20-35KHz) induction coil is located under ne at h t he su rface of the ceramic top plate. It heats the cooking pan through magnetic friction. The heat is produced directly within the wok. It's controlled by an electronic circuit to offer superior performance and function. During cooking, there is no energy lost between the cooker and the food. Cooking stops when you switch the power off.

PRECAUTIONS BEFORE USING YOUR INDUCTION WOK

1. The glass top is made of strong, hard, and non-por ou s pr op er t ie s. But, in case of breakage, even if it's only slightly cracked, disconnect the appliance from the outlet immediately and contact the after-sales service.

2. The appliance is equipped with a Small Object Detector. It is recommended not to place metal kitchen utensils, pan lids, knives, or other small metal objects on the induction heating zone. If the inductor is switched on, there is a risk of the objects becoming hot.

3. When using your induction wok cooker, don't place any magnetic objects on the glass wok top, such as credit cards, cassettes, etc.

4. Scientific tests have shown that the induction hob presents no danger for a person using a pacemaker. Please keep a 2’ distance from the unit while the induction wok cooker is in use anyway.

5. To prevent from overheating, do not place aluminum-foil or an iro n plat e on the wok top.

6. To prevent an electric shock, do not put any articles like iron wire or tools into the air entrance or outlet.

7. Immediate clean up is recommended when water is left on the to p plat e.

OPERATION INSTRUCTION

1. Plug power cord into 240V dedicated circ uit.

2. Turn on power by pushing the power on / off key, po we r level display LED will light on .

3. Put a suitable / recommended wok-pan in the middle of the induction wok cooker .

4. Rotate the rotary knob to select power level: Level 1 (minimum) to Level 9 (maximum).

5. The Heating Indicator Light will indicate if the wok pan is suitable or not. If the light is on, then the wok is heated. If the light is off, it indicates that the power is on, but no wok or no suitable wok is on the glass top.

6. This unit is equipped with an Over Heating Protection Device, which will stop power temporarily. Should this occur, the Heat ing In dicator Light will flash to indicate the Over Heating Protection function is on. Then, if it las ts for more than 60 seconds, then the induction wok cooker will automatically shutoff.

CONTROL PANEL,

2 3

1. POWER on/off button

2. HEATING Indicator Light

3. POWER LEVEL indicator (showing from 1 ~ 9 power levels)

4. ROTARY KNOB to select power levels

FEATURES & DESCRIPTION:

MODEL# IWC-25A

1. 2500 watt Induction Wok

2. Ceramic Wok Top

3. Stainless Steel Cabinet

4. Rotary Knob

5. Heating Indicator Light

6. Power on/off key

7. Air-Intake

8. Air-Outlet

9. Foot Stand

10. Digital Display (shows power levels 1 to 9)

SPECIFICATION:

Model No. IWC-25A Induction Wok Voltage 240V ~ 60Hz Vitro-Ceramic Wok Diameter: approx. 12.75” Electrical Power

Max. 2,500watt Consumption Safety Device

z Over Time Protector (2 Hrs.)

z Automatic Safety Shut-Off

z Material Compatibility Detector

z Small Object Detector

z Overheating Protection Device

z IC Auto Reset.

Dimension 15.16” x 16.61” x 6.30” (including rubber-foot stand)

38.5cm x 42.2cm x 16cm (including foot stand

height)

TROUBLE SHOOTING

1. If your induction wok cooker seems to be working improperly, it doesn't necessarily mean it's faulty. In all cases, check the below points.

2. If you fail to identify the problem, contact the after-sales service immediately.

Problem Resolution No indication light when power "on" Cable/terminal block is loose Tripped circuit or fuse; or automatic switch in your house Power supply stopped Heating indicator does not light-up, Unsuitable cooking utensil Appliance fails to heat up Utensil is located at the center properly Utensil is smaller than 5cm Over-heating protection is activated Appliance suddenly stops heating

Temperature became too high during Operation Air entrance or outlet blocked Over-heating protection activated