CDVI WIRELESS S P A DS433 Users Manual

ERONE DS433

USE

0

8

6

7

THE SMART LIVING

SETDS39433-E2
SETDS39433-E4

Thank you for choosing a product Erone.You are
recommended to read carefully this manual before using
the product.

1 - DESCRIPTION

The radiocontrol ERONE DS433 has been designed for the
control of automatic closing systems and anti-burglar
systems. The operating frequency is among the European
harmonised frequencies; the product fully complies with
the European Regulations 89/336/CEE, 73/23/CEE ,
99/05/CE. The receiver which makes the activation, once
received the transmitter code, has to be connected during
the installation to the device to control ( gate, garage door,
rolling shutters, awnings, anti-burglar appliances, lighting
). The transmitter security code is obtained by means of a 9
ways three-state dip-switch which allows up to 19683 code
combinations. All the receivers of the range Erone DS433
can store into the EEPROM the code of many transmitters.
Each transmitter ( or its different keys ) can be stored into
different receivers and hence can do more functions.
In order to use the unused keys of the transmitter it is
enough to connect the dedicated receiver to the
mechanism to drive ( i.e. electrolock of a pedestrian gate, a
buzzer, etc. ) and proceede to store the keys on its memory.

2 - TECHNICAL SPECIFICATIONS

Number of keys : 2 or 4
Supply : 12 Vdc
Battery duration: from 12 to 24 months
Battery type: 23A
Current consumption : 25 mA
Operating frequency : 433.92 MHz
Security code combinations number: 19683
Modulation: AM/ASK
E.r.p. : 50 - 100 uW
Range in open space : from 100 to 200 m
Operating temperature : from -10 °C to +55 °C
Dimensions : 83 x 48 x 16 mm
Weight : 40 g

MA

N

R

UA

L

3 - EXTERNAL CHARACTERISTICS

RED LED

BUTTON 1

CHANNEL A

RED LED

BUTTON 3

CHANNEL C

BUTTON 2

CHANNEL B

BUTTON 4

CHANNEL D

BATTERY

DOOR

4 - MODEL TYPES

2 buttons transmitter : Cod. SETDS39433E2

4 buttons transmitter : Cod. SETDS39433E4

5 - CODING

Open the rotating door to access to the battery and the
dip-switches.The dip-position will give the security code.
Warning: Each transmitter is provided with the same code
set on the dip-switches; it highly advisable to change this
code by moving the dip-switches on the favourite position
( “+”, “0” , “-”).

6 - TRANSMITTER CODES MEMORISATION

The transmitter code has to be stored into the receiver
memory. The memorisation can be done by selflearning.
The instructions for this operation are reported on the
receiver installation manual. Your own installer will
perform this operation during the installation or will give
you the necessaries explications during the selling.
Don’t forget that the still free buttons of your transmitter
can be used for further wireless fuctions.
Ask your installer the best suitable receiver.

7 - BATTERY AND DIP-SWITCH ACCESS

Dip-switch

Battery

Rotating door

Rotate to open

To access the battery slide out the battery door. Place the 23A alkaline
battery between the 2 contacts.
Respect the right polarity as indicated on the bottom of the box.

NOTE: Please dispose of the batteries correctly, they are hazardous
waste.

8 - TROUBLESHOOTING

FAULT

The radio signal is not

verifiable

The transmitter led

doesn't switch on

The radio signal is not

verifiable

The transmitter led

switches on

SOLUTION

Replace the transmitter

battery

Check the power supply

of the receiver

Replace the transmitter

battery

For further informations, please, visit the

internet site www.erone.com

ERONE - Type : SETDS39433E2-E4

FCC ID : PWJDS433

This device complies with FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including
interference that may cause undesired operation.

Any changes or modification to ERONE equipment not expressly
approved by ELPRO INNOTEK Spa could void the user's authority
to operate the equipment.

The guarantee period of all Erone products is 24 months,
beginning from the manufacturer date. During this
period, if the product does not work correctly, due to a
defective component, the product will be repaired or
substituted at the discretion of the producer. The
guarantee does not cover the plastic container integrity.
After-sale service is supplied at the producer's factory.

ERONE is a trademark by ELPRO INNOTEK S.r.l.

Via Piave, 23 - I-31020 S.Pietro di Feletto (TV)

Tel.: [phone] - Fax.: [phone]

Toll-free number: 800.53.46.46

E-Mail: [e-mail]

Web: www.erone.com

Part. 15 of the

Notice

GUARANTEE

ITALY