CDVI WIRELESS S P A 024A Users Manual

RCS - 433LS

Stand alone

RCS

Thank you for choosing a RCS product. You are recommended to
read this manual carefully before installing the product.

CONTENTS

1 - TRANSMITTER INTRODUCTION

1A - General information
1B - Technical specifications
1C - Main features

2 - CODING

3 - MEMORIZATION

4 - BATTERY ACCESS

5 - TROUBLESHOOTING

1A - General information

The radiocontrol RCS-433LS has been designed for the control of automatic
closing systems and anti-burglar systems thanks to its very high security
coding system. (KeeLoq ® Hopping code). The code sent by the transmitter
changes at each activation, avoiding any scanning and copying risk.
A special algorithm allows to keep synchronysed transmitter and receiver.
The operating frequency is 433,92 MHz.
The receiver which makes the activation, once received the transmitter
code, has to be connected during the installation to the device to control

G

ET

STARTED

TIN

RCS-433LS2
RCS-433LS4

G

( gate, garage door, rolling shutters, sun-blinds, anti-burglar appliances,
lighting ). All the receivers of the range RCS-433S can store into the
EEPROM a serial number, a manufacturer key and a synchronism algorithm
of more transmitters.
Each transmitter ( or its different keys ) can be stored into different receivers
and hence can do more functions.
In order to use the unused keys of the transmitter it is enough to connect the
dedicated receiver to the mechanism to drive ( i.e. electrolock of a
pedestrian gate, a buzzer, etc. ).
The product fully complies with the European Directives 99/5/CE,
89/336/CEE, 73/23/CEE and with the Part 15 of FCC Regulations.

1B - Technical specifications

Number of keys: 2 / 4
Supply : 1 Alkaline Battery 12V type 23A
Battery life: 12 - 18 months
Current consumption : 25 mA
Operating frequency : 433.92 MHz
Code combinations : 2
Modulation : AM / ASK
Rated e.r.p. : 50 - 100 µW
Range in free space: 60 - 120 yd
Operating temperature: -20 ÷ +55 °C
Overall dimensions: 3.26 x 1.88 x 0.62 in
Weight: 20 gr.

64

1C - Main features

Red
LED

Push-button

A

Push-button

C

Key holder

ring

Push-button

B

Push-button

D

Battery

door

2 - CODING

Each transmitter is manufactured and sold with a different univocal serial
number set-in-factory. The real transmitted code is the result of a special
algorithm which combines a serial number, a manufacturer key and a
synchronization number.

3 - MEMORIZATION

The transmitter security code has to be stored onto the receiver or the
receivers memory available. Your own installer or reseller will perform this
operation during the installation or will give you the necessaries instructions
during the selling. Don't forget that the still free buttons of your transmitter
can be used for further wireless functions.
Ask your installer the best suitable receiver.

4 - BATTERY ACCESS

To access the battery slide out the battery door
Place the 23A alkaline battery between the 2
contacts.
Respect the right polarity as indicated on the
bottom of the box.

Battery

+

23A

Polarity

_

NOTE: Please dispose of the batteries correctly,
they are hazardous waste.

5 - TROUBLESHOOTING

FAULT

SOLUTION

RCS-433LS - Type : S2TR2641E2

FCC ID : PWJ024A

This device complies with FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including
interference that may cause undesired operation.

Any changes or modification to RCS equipment not expressly approved
by RCS could void the user's authority to operate the equipment.

The guarantee period of all RCS transmitter batteries is 6 months,
beginning from the manufacturer date. During this period, if the product
does not work correctly, due to a defective component, the product will be
repaired or substituted at the discretion of the producer.
The guarantee does not cover the plastic container integrity.

Part. 15 of the

Notice

GUARANTEE

The radio emission isn’t verifiable

The transmitter led is OFF.

The radio emission isn’t verifiable

The transmitter led is ON.

The transmitter led

blinks

Replace the transmitter

battery

Check the receiver supply.

Replace the transmitter

battery

REMOTE CONTROL SOLUTIONS

College Park Commerce Center

2042 N. Rio Grande Ave. Suite A

Orlando - FL 32804

U.S.A.

Office: (407)-426-8687

Fax: [phone]

e-mail: [e-mail]

IS-TLSGXUK Rev. 1 on 20.12.2002