cdtechno PWR1100, PWR1101, PWR1102, PWR1103, PWR1104 Datasheet

Product Data Sheet

DUAL-IN-LINE DC/DC CONVERTER

FEATURES

 Low Cost

 Industry-Standard Package

 Single and Dual Outputs

 Internal Input and Output Filtering

 24-Pin DIP Package

 Built-In Standoffs

1.5 WATT UNREGULATED

PWR11XX

DESCRIPTION

The PWR11XX Series offers a broad line of low-cost, high­performance, unregulated, single and dual output DC/DC
converters in a 24-pin DIP package. These miniature convert­ers offer better performance and lower cost in industry­standard packages and pin-outs. The PWR11XX Series is
internally filtered. No external parts are necessary.

Surface mounted components and a special encapsulant al­low for superior reliability, excellent thermal dissipation, and
an extended temperature range of –25°C to +85°C at no extra
cost.

The PWR11XX Series is ideal for use on high-density PC
boards where isolated, unregulated, power is needed. Stand­offs allow for PC board cleaning, helping preserve isolation.
They also allow for visual inspection of solder joints.

MECHANICAL

0.400±0.010"

.010±0.005"

(20.45)

.805±0.010"

1.270±0.010"
(32.26)

MATERIAL: Units are encapsulated in Iso­ThermoFlex, a low thermal resistance molding com­pound which has excellent chemical resistance, wide
operating temperature range, and good electrical proper­ties under high humidity environments. The encapsulant
and outer shell of the unit have UL94V-0 ratings. Lead
material is brass with a solder plated surface to allow ease
of solderability.

Power Electronics Division, United States

3400 E Britannia Drive, Tucson, Arizona 85706

Phone: [phone] Fax: [phone]

PWR11XX 7/99 REV E Page 1

(0.25)

0.100±0.015"
(2.54)

1 2 3

24 23 22 15 14 13

Internet: http://www.cdpowerelectronics.com

.020±0.002"

(0.51)

10 11 12

(10.16)

0.170 "
(4.32)

PIN # SINGLES DUALS

1 +VIN +VIN
2 NC –VOUT
3 NC Common

10 –VOUT Common
11 +VOUT +VOUT

MIN

Notes:

All dimensions are in inches (millimeters).

GRID: 0.100 inches (2.54 millimeters)

PIN PLACEMENT TOLERANCE: ± 0.015"

Marked with: specific model ordered, date code,
job code.

132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland

12 –VIN –VIN

13 –VIN –VIN
14 +VOUT +VOUT
15 –VOUT Common

22 NC Common
23 NC –VOUT
24 +VIN +VIN

Power Electronics Division, Europe

C&D Technologies (Power Electronics) Ltd.

Tel: [phone] Fax:[phone]

ELECTRICAL SPECIFICATIONS

Specifications typical at TA = +25°C, nominal input voltage, and rated output current unless otherwise noted.

MODEL INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT NO LOAD RATED LOAD RIPPLE CURRENT

NOMINAL RATED RATED REFLECTED

Units VDC VDC mA mA mA mAp-p

PWR1100 5 5 300 30 400 45
PWR1101 5 12 125 30 400 45
PWR1102 5 15 100 30 400 45
PWR1103 5 ±5 ±150 30 400 45
PWR1104 5 ±12 ±63 30 400 45
PWR1105 5 ±15 ±50 30 400 45

PWR1106 12 5 300 30 175 25
PWR1107 12 12 125 30 175 25
PWR1108 12 15 100 30 175 25
PWR1109 12 ±5 ±150 30 175 25
PWR1110 12 ±12 ±63 30 175 25
PWR1111 12 ±15 ±50 30 175 25

PWR1112 15 5 300 30 140 20
PWR1113 15 12 125 30 140 20
PWR1114 15 15 100 30 140 20
PWR1115 15 ±5 ±150 30 140 20
PWR1116 15 ±12 ±63 30 140 20
PWR1117 15 ±15 ±50 30 140 20

PWR1118 24 5 300 30 90 20
PWR1119 24 12 125 30 90 20
PWR1120 24 15 100 30 90 20
PWR1121 24 ±5 ±150 30 90 20
PWR1122 24 ±12 ±63 30 90 20
PWR1123 24 ±15 ±50 30 90 20

PWR1140 5 9 167 30 400 45
PWR1141 12 9 167 30 175 25
PWR1142 15 9 167 30 140 20

INPUT CURRENT

COMMON SPECIFICATIONS

Specifications typical at TA = +25°C, nominal input voltage, and rated output current unless otherwise noted.

PARAMETER CONDITIONS MIN TYP MAX UNITS

INPUT

Voltage Range 4.5 5 5.5 VDC

ISOLATION

Rated Voltage 500 V
Test Voltage 60 Hz, 10 Seconds 500 Vpk
Resistance 10 GΩ
Capacitance 90 pF
Leakage Current V

= 240VAC, 60Hz 10 µArms

ISO

OUTPUT

Rated Power 1.5 W
Voltage Setpoint Accuracy Rated Load, Nominal V
Temperature Coefficient ±0.02 %/%°C

in

Ripple and Noise
(BW = DC to 20MHz) No External Components 150 mVp-p

10µF Across Each Output 10 mVrms
10µF Across Each Output 30 mVp-p

Voltage No Load, V

No Load, V
No Load, V

= +5V 7 VDC

OUT

= ±12V ±15 VDC

OUT

= ±15V ±18 VDC

OUT

Line Regulation 1.2 %/%V
Load No Load To Rated Load 6 %

GENERAL

Switching Frequency 150 kHz
Package Weight 12 g
MTTF per MIL-HDBK-217 Rev. E* Circuit Stress Method 800 kHr
Efficiency 75 %

TEMPERATURE

Specification –25 +25 +85 °C
Operation –40 +100 °C
Storage –40 +110 °C

* For demonstrated MTTF results reference Burr-Brown Reliability Report PWR1205 (Literature Number PA647)

10.8 12 13.2 VDC

13.5 15 16.5 VDC

21.6 24 26.4 VDC

±3 ±5 %

PWR11XX 7/99 REV EPage 2

DC

IN