cdtechno NTE0515M, NTE0305M, NTE1212M, NTE1215M, NTE1209M Datasheet

FEATURES

■ Wide Temperature Performance at

Full 1 Watt Load, –40°C to 85°C

■ Lead Frame Technology

■ CECC00802 Reflow (280°C)

■ Single Isolated Output

■ 1kVDC Isolation

■ Efficiency to 78%

■ Power Density 1.8W/cm

3

■ 3.3V, 5V & 12V Input

■ 3.3V, 5V, 9V, 12V and 15V Output

■ Footprint Over Pins 1.64cm

2

■ UL 94V-0 Package Material

■ No Heatsink Required

■ Internal SMD Construction

■ Toroidal Magnetics

■ Plastic Encapsulated

■ MTTF up to 2.9 Million Hours

■ Custom Solutions Available

■ Multi Layer Ceramic Capacitors

■ Lead Free Compatible

DESCRIPTION

The NTE series of miniature surface mounted
DC-DC Converters employ leadframe
technology and transfer moulding techniques
to bring all of the benefits of IC style
packaging to hybrid circuitry. The devices are
fully compatible with CECC00802 to 280°C
which allows them to be placed and reflowed
with IC’s, thus reducing time and cost in
production. The co-planarity of the pin
positions is based upon IEC 191-6:1990.
The devices are suitable for all applications
where high volume production is envisaged.

NTE SERIES

Isolated 1W Single Output SM DC-DC Converters

SELECTION GUIDE

Nominal Input

Input Output Output Current at Isolation

Voltage Voltage Current Rated Load Efficiency Capacitance MTTF

O rd e rC o de5(V) (V) (mA) (mA) (%) (pF) kHrs

NTE0303M
NTE0305M
NTE0503M
NTE0505M
NTE0505ME
NTE0509M
NTE0512M
NTE0515M
NTE1205M
NTE1209M
NTE1212M
NTE1215M

When operated with additional external load capacitance the rise time of the input voltage will determine the
maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the
greater the maximum value of the additional external capacitance for reliable start up.

INPUT CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Voltage Range Continuous operation, 5V input types 4.5 5 5.5 V

Reflected Ripple Current 30 47 mA p-p

OUTPUT CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Rated Power
Voltage Set Point

Accuracy
Line regulation High VINto low V

Load Regulation

Ripple and Noise

ABSOLUTE MAXIMUM RATINGS

Short circuit duration
Internal power dissipation 600mW
Lead temperature 1.5mm from case for 10 seconds 300°C
Input Voltage VIN, NTE03 types 5.5V
Input Voltage VIN, NTE05 types 7V
Input voltage VIN, NTE12 types 15V

3.3 3.3 303 410 73 30 1234

3.3 5 200 390 78 35 632
5 3.3 303 270 74 40 619
5 5 200 294 68 35 2418
5 5 200 260 77 40 419
5 9 111 267 75 43 1174
5 12 83 260 77 42 634
5 15 66 256 78 44 360

12 5 200 124 67 47 621
12 9 111 114 73 77 488
12 12 83 113 74 88 360
12 15 66 111 75 95 252

Continuous operation, 3.3V input types 2.97 3.30 3.63

Continuous operation, 12V input types 10.8 12 13.2

2

TA= -40°C to 85°C 1.0 W
See tolerance envelope

IN

10% load to rated load,
0303M, 0305M, 0503M, 0505ME

10% load to rated load, 5V output types 12.8 15

3

1.0 1.2 %/%

10 14

10% load to rated load, 9V output types 8.3 9.0
10% load to rated load, 12V output types 6.8 7.5
10% load to rated load, 15V output types 6.3 7.0
BW=DC to 20MHz,

0303M, 0305M, 0503M, 0505ME types

40 60

BW=DC to 20MHz, 5V output types 62 85
BW=DC to 20MHz, 9V output types 49 75
BW=DC to 20MHz, 12V output types 39 65
BW=DC to 20MHz, 15V output types 38 76

4

1second

%

mV p-p

1

www.dc-dc.com

1 Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2 See derating curve.
3 12V input types have typically 3% less load regulation change.
4 Supply voltage must be discontinued at the end of the short circuit duration.
5 If components are required in tape and reel format suffix order code with -R, e.g. NTE0505M-R

All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.

NTE SERIES

Isolated 1W Single Output SM DC-DC Converters

ISOLATION CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Isolation Test Voltage Flash tested for 1 second 1000 VDC
Resistance Viso=1000VDC 10 GΩ

GENERAL CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Switching Frequency All variants 110 kHz

TEMPERATURE CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Specification All output types –40 85 °C
Storage –55 125 °C

Case Temperature
above ambient

0303M, 0305M, 0503M, 0505ME
0505M, 1205M 40 °C
All other output types 40

Cooling Free air convection

30

PERFORMANCE CHARACTERISTICS

tolerance envelope (3.3V output types)

+

9%

+1%

V

NOM

-7%

10 25 50 75 100

Output Load Current (%)

+1%

-7%

-15%

MECHANICAL DIMENSIONS

12.70

7.62

8101214

7.70

2.54

(6.35)

5.85

NTE0505M

XYYWW

1 3 5 7

All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch.

10 PINS

0.65

0.55

2.10

0.25

0.10

0.1S

11.20

10.40

6.60

(5.95)

2.79MAX

TEMPERATURE DERATING

tolerance envelope (all other types)

+

10%

+5%

V

NOM

10 25 50 75 100

Output Load Current (%)

+2.5%

-2.5%

-7.5%

DETAIL A

REFERENCE
PLANE

0.5

P

1.50

1.20

M

0.2

S

P

±5.00°

DETAIL A

SEATING PLANE

S

1.875
MAX

0.30

0.20

2.0

1.5

1.0

0.5

Safe Operating Area

0

-40 0 50 100 150
Ambient Temperature (°C)

PIN

1 GND
3 V

IN

5 NA
7 0V

8 +V
10 NA
12 NA
14 NA

NA – Not available
for electrical connection

We i g h t:1.21g

85°C

C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.

© C&D Technologies (NCL) Limited 2001 NDC NTE.4
No part of this publication may be copied, transmitted or stored in a

retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.

Instructions for use are available from www.dc-dc.com

C&D Technologies (NCL) Ltd

Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: [phone]
Fax:[phone]
email: [e-mail]

www: http://www.dc-dc.com

C&D Technologies (NCL), Inc.

5816 Creedmoor Road, Raleigh
NC 27612, USA
Tel: [phone]
Fax: [phone]
email: [e-mail]