cdtechno NMR100, NMR108, NMR102, NMR101, NMR106 Datasheet

NMR SERIES

Isolated 1W Single Output DC-DC Converters

SELECTION GUIDE

Nominal

Input Output Output Input Current

Voltage Voltage Current at Rated Load MTTF

Order Code (V) (V) (mA) (mA) (%) (pF) kHrs

NMR100 5 5 200 290 69 28 1322

NMR101 5 12 83 260 77 33 235

1

FEATURES

■ Wide Temperature Performance at

Full 1 Watt Load, –40°C to 85°C

■ Industry Standard Pinout

■ 1kVDC Isolation

■ Efficiency to 79%

■ Power Density up to 0.90W/cm

3

■ 5V & 12V Input

■ 5V, 12V & 15V Output

■ Footprint of 1.17cm

2

■ UL 94V-0 Package Material

■ No Heatsink Required

■ Internal SMD Construction

■ Toroidal Magnetics

■ Fully Encapsulated

■ No External Components Required

■ MTTF up to 1.6 Million Hours

■ Custom Solutions Available

■ No Electrolytic or Tantalum

Capacitors

DESCRIPTION

The NMR series of industrial temperature
range DC-DC converters are the standard
building blocks for on-board distributed
power systems. They are ideally suited for
providing single rail supplies on primarily
digital boards with the added benefit of
galvanic isolation to reduce switching noise.
Surface mount technology and advanced
packaging materials produce rugged reliable
performance over an extended temperature
range from –40°C to 85°C.

NMR102 5 15 67 253 79 40 127

NMR106 12 5 200 121 69 36 515

NMR107 12 12 83 110 76 58 184

NMR108 12 15 67 110 76 56 111

When operated with additional external load capacitance the rise time of the input voltage will determine the
maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the
greater the maximum value of the additional external capacitance for reliable start up.

INPUT CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Voltage Range

Reflected Ripple Current 40 60 mA p-p

Continuous operation, 5V input types 4.5 5 5.5
Continuous operation, 12V input types 10.8 12 13.2

V

OUTPUT CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Rated Power2TA= –40°C to 85°C 1.0 W
Voltage Set

Point Accuracy
Line Regulation High VINto low V

Load Regulation 10% load to rated load, 12V output types 6.9 7.7 %

Ripple & Noise BW=DC to 20MHz 30 50 mV p-p

See tolerance envelope

10% load to rated load, 5V output types 12.5 13.4

IN

10% load to rated load, 15V output types 6.5 7.5

1.0 1.2 %/%

ABSOLUTE MAXIMUM RATINGS

Short-circuit duration
Internal power dissipation 550mW
Lead temperature 1.5mm from case for 10 seconds 300°C
Input voltage VIN, NME05 types 7V
Input voltage VIN, NME12 types 15V

3

1 second

www.dc-dc.com

1 Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2 See derating curve
3 Supply voltage must be discontinued at the end of the short circuit duration.

All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.

NMR SERIES

Isolated 1W Single Output DC-DC Converters

ISOLATION CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Isolation Test Voltage Flash tested for 1 second 1000 VDC
Resistance Viso=1000VDC 10 GΩ

GENERAL CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Switching Frequency

TEMPERATURE CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Specification All output types -40 85 °C
Storage -50 130 °C
Case Temperature

Above Ambient
Cooling Free air convection

PERFORMANCE CHARACTERISTICS

tolerance envelope

+10%

+5%

V nominal

5V input types 110
12V input types 160

5V output types 33
All other output types 28

+2.5%

-2.5%

-7.5%

kHz

°C

temperature derating graph

2.0

1.5

1.0

10 50 100

Output Load Current (%)

MECHANICAL DIMENSIONS

7 Pin SIP

19.50

6.00

PIN

1 V

IN

2 GND
4 0V
6 +V

Weight: 2.1g

All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position.

4.60

3.60

NMR100

10.0

XYYWWi

1 2 4 6

2.54

Safe Operating Area

0

-40 0 50 100 150
Ambient Temperature (°C)

1.25

0.55

0.45

1.88±0.50

0.55

0.45

0.5

12.70

0.30

0.20

C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.

© C&D Technologies (NCL) Limited 2001 NDC NMR.3

No part of this publication may be copied, transmitted or stored in a
retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.

Instructions for use are available from www.dc-dc.com

C&D Technologies (NCL) Ltd

Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: [phone]
Fax:[phone]
email: [e-mail]

www: http://www.dc-dc.com

C&D Technologies (NCL), Inc.

5816 Creedmoor Road, Raleigh
NC 27612, USA
Tel: [phone]
Fax: [phone]
email: [e-mail]