cdtechno NMJ0512S, NMJ1205S, NMJ1215S, NMJ1212S, NMJ1209S Datasheet

www.cdpoweronline.com

SELECTION GUIDE

FEATURES

■ Wide Temperature Performance at

Full 1W Load, –40°C to 85°C

■ BS EN 60950 Certified

■ 5.2kVDC Isolation (1 Minute)

■ Dual Outputs

■ Power Sharing

■ SIP Package Style

■ Efficiency to 80%

■ Power Density 0.42W/cm

3

■ 5V & 12V Input

■ 5V, 9V, 12V & 15V Output

■ Pin Compatible with NMV Series SIP

DC/DC Converters

■ Footprint 1.91cm

2

■ UL 94V-0 Package Material

■ No Heatsink required

■ Internal SMD Construction

■ Toroidal Magnetics

■ Fully Encapsulated

■ MTTF up to 1.6 Million Hours

■ Custom Solutions Available

DESCRIPTION

The NMJ series are dual output DC/DC
converters in a 7 pin SIP package style
offering pin and functionality compatibility
with the NMV series SIP DC/DC converters.
The series was tested by British Standards
Institute (BSI) and received certificate number
8105 issue 2 confirming compliance with BS
EN 60950 and IEC 950 safety standards for
reinforced insulation. The NMJ series is
suitable for applications where safety and
miniaturisation are of paramount importance.
EN 60950 is derived from IEC 950 and is
equivalent to UL 1950 and CSA 950
standards.

Nominal

Input Output Output Isolation

Voltage Voltage Current Efficiency Capacitance MTTF

1

Order Code (V) (V) (mA) (%) (pF) kHrs

NMJ0505S 55±100 65 1.6 1517

NMJ0509S

59±55701.6 619

NMJ0512S 512±4270 1.8 313

NMJ0515S 515±3370 1.9 172

NMJ1205S 12 5 ±100 65 1.8 456

NMJ1209S 12 9 ±55 70 1.9 318

NMJ1212S

12 12 ±42 70 2.0 211

NMJ1215S 12 15 ±33 70 2.1 136

When operated with additional external load capacitance the rise time of the input voltage will determine the
maximum external capacitance value for guaranteed start up. The slower the rise time of the input voltage the
greater the maximum value of the additional external capacitance for reliable start up.

Parameter Conditions MIN TYP MAX Units

Continuous operation, 5V input types 4.5 5 5.5

Voltage Range

Continuous operation, 12V input types 10.8 12 13.2

V

Parameter Conditions MIN TYP MAX Units

Rated Power2TA= –40°C to 85°C 1 W
Output Voltage

Accuracy

See tolerance envelope –7.5 10 %

Line Regulation High VINto low V

IN

1.0 1.2 %/%

10% load to rated load, 5V output types 10 15

Load Regulation

10% load to rated load, 9V output types 6 10

%

10% load to rated load, 12V output types 6 10
10% load to rated load, 15V output types 6 10

Ripple & Noise BW=DC to 20MHz, all output types 200 mV p-p
Zero Load Power

5V output types 275

mW

Consumption

12V output types 185

Short-circuit duration

3

1 second
Lead temperature 1.5mm from case for 10 seconds 300°C
Input voltage VIN, NMJ05 types 7V
Input voltage VIN, NMJ12 types 15V

INPUT CHARACTERISTICS

OUTPUT CHARACTERISTICS

ABSOLUTE MAXIMUM RATINGS

1 Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2 See derating curve
3 Supply voltage must be discontinued at the end of the short circuit duration.

All specifications typical at T

A

=25°C, nominal input voltage and rated output current unless otherwise specified.

NMJ SERIES

5.2kVDC Isolated 1W DC/DC Converters

C&D Technologies (NCL) Limited reserve the right to alter or improve the
specification, internal design or manufacturing process at any time, without
notice. Please check with your supplier or visit our web site to ensure that
you have the current and complete specification for your product before use.

© C&D Technologies (NCL) Limited 2003 NDC NMJ.4
No part of this publication may be copied, transmitted or stored in a

retrieval system or reproduced in any way including, but not limited to,
photography, photocopy, magnetic or other recording means, without prior
written permission from C&D Technologies (NCL) Limited.

Instructions for use are available from www.cdpoweronline.com

C&D Technologies (NCL) Ltd

Tanners Drive, Blakelands North
Milton Keynes MK14 5BU, England
Tel: [phone]
Fax:[phone]
email: [e-mail]

www.cdpoweronline.com

C&D Technologies Inc.

3400 E Britannia Drive, Tucson,
Arizona 85706, USA
Tel: [phone]
Fax: [phone]
email: [e-mail]

NMJ SERIES

5.2kVDC Isolated 1W DC/DC Converters

ISOLATION CHARACTERISTICS

GENERAL CHARACTERISTICS

TEMPERATURE CHARACTERISTICS

Parameter Conditions MIN TYP MAX Units

Isolation Test Voltage 1 minute 5200 VDC
Resistance 500VDC 1000 MΩ

Parameter Conditions MIN TYP MAX Units

Switching Frequency 70 kHz

Parameter Conditions MIN TYP MAX Units

Specification All output types -40 85 °C
Storage -55 130 °C
Case Temperature

All output types 30 °C

Above Ambient
Cooling Free air convection

MECHANICAL DIMENSIONS

0.77 (19.50)

0.39

(9.80)

0.49

(12.50)

0.18 (4.60)

0.14 (3.60)

0.022 (0.55)

0.018 (0.45)

0.022 (0.55)

0.018 (0.45)

0.094
(2.40)

0.074±0.02

1. 88±0.50

0.10 (2.54)

7 Pin SIP

12 567

PIN

1V

IN

2 GND
5–V
60V
7+V

Weight: 4.9g

All dimensions in mm XX.XX ±0.25mm. All pins on a 2.54mm pitch and within ±0.25mm of true position.

XYYWWi

NMJ0505S

PERFORMANCE CHARACTERISTICS

tolerance envelope

+10%

+6%

V nominal

temperature derating graph

2.0

1.5

1.0

0.5

0

+2.5%
–4%
–7.5%

Output Voltage

Output Power (W)

10 50 100

Output Load Current (%)

-40 0 50 100 150
Ambient Temperature (°C)

85°C

Safe Operating Area

0.012 (0.30)

0.007 (0.20)