1
4GE+CATV+WiFi Single Fiber GPON ONT
User Manual
2
Contens
1. Introduce ..................................................................................................................................... 3
1.1 Applications ....................................................................................................................... 3
1.2 Function ............................................................................................................................. 3
1.3 Interface ............................................................................................................................ 4
1.4 LED Description ............................................................................................................... 4
1.5 environmental parame ter ................................................................................................ 5
2. Introduce configuring th e net w ork ........................................................................................... 5
2.1 Prepare for login the ONT web management .............................................................. 5
2.2 Login ONT ............................................................................................................................ 6
2.3 ONT Authentication ............................................................................................................ 7
2.3 LAN Configuration ............................................................................................................... 8
2.4 WAN Configuration ............................................................................................................. 8
2.4.1 Add WAN Connection PPPOE ................................................................................... 9
2.4.2 Add WAN Connection IPOE .................................................................................... 12
2.4.2 Add WAN ConnectionAs Bridging .......................................................................... 13
2.5 IPTV Configuration ............................................................................................................ 14
2.5.1IGMP Proxy .............................................................................................................. 14
2.5.2 IGMP Snooping ....................................................................................................... 14
2.5.3 IGMP Snooping ....................................................................................................... 14
2.6 Wireless setting ........................................................................................................... 15
2.6.1 Basic setting ........................................................................................................ 15
2.6.2 Security Setting ................................................................................................... 15
2.6.3 MAC filter ............................................................................................................. 17
2.6.4 Wireless Bridge ................................................................................................... 18
2.6.5 Advanced Setting ................................................................................................ 18
2.6.6 Station information ............................................................................................. 19
2.7 CATV setting ................................................................................................................ 19
2.8 Equipment Managem ent .............................................................................................. 20
2.8.1 Restore Default ................................................................................................... 20
2.8.2 Update software .................................................................................................. 20
2.8.3 Equipment Reboot .............................................................................................. 21
3
1. Introduce
The 4GE+CATV+WIFI terminal devices ONT are designed for fulfilling FTTH and triple
play service demand of fixed network operators or cable operators. These boxes are
based on the mature GPON technology, which have high ratio of performance to price,
and the technology of 802.11n Wi-Fi, Layer 2/3 as well. They are highly reliable and easy
to maintain, with guaranteed QoS for different service. And they are fully com pliant with
technical regulations suc h as ITU-T G.984 and technical requirement of GPON Equipment
from China Telecom.
1.1 Applications
1.2 Function
Interfaces
► GPON interface GPON standard, SC/APC
► Ethernet interface: Four GE interfaces, RJ-45, comply with IEEE802.3 and
IEEE802.3u standards.
► WLAN interface: Comply w it h I EE E 802.11n standard, antenna i nside
► CATV interface: 1 RF output, Female F-Type Connector
Technical Features
4GE+CATV+WiFi has the following features.
► Broadband service access: connected to Internet through the GPON access method.
► Ethernet service access: Provides GE/FE Ethernet interfaces, connected to the there
to devices, such as the user PC. Provides the Internet access and IPTV services.
► WLAN service access: Provides Internet service for the users through the WLAN
method.
►
CATV service access: Provide cable TV service
4
► Security: Provides multi-level authentication based on the device, user and service,
and provides the data channel encryption for safety.
► QoS: Provides QoS services meeting the requirements of various services for the
local devices and network
► Network management: Provides mu lti-mo de networ k manage ment.
1.3 Interface
1.4 LED Description
5
Indicator Description
1 PWR Power status
On: The ONU is power on
Off: The ONU is Power off
2 WIFI WIFI
Blinking：Data is being transmitted
On：Wi-Fi function Opens
3 LAN1-4 LAN port status
On: Ethernet connection is normal
Blinking: Data is being transmitted through the Ethernet port
Off: Ethernet connection is not set up
4 LOS GPON optical signals
On: Optical power lower than receiver sensitivity ;
Off: Optical in normal
5 PON ONT Register
On: Success to register to OLT
Blinking: In process of registering to OLT
Off: Failed to register to OLT;
6 CATV CATV status
On：CATV optical normal（>-9dBm）
Off：The CATV signals are not received（<-9dBm）
1.5 environmental parameter
Item Specification
Dimension 200mm(L) x 140mm(W) x 33mm (H)
Rated current 1 A
Rated voltage 12 V DC
Operating temperature: 0 t o 50ºC
Storage temperature: -40 to 85ºC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 5% to 95% (Non-condensing)
2. Introduce configuring the network
2.1 Prepare for login the ONT web management
Before you login the ONT, you should confirm the connect between the ONT and y our PC
is normal.
Step 1 Configuring the IP address of your PC to 192.168.100.X（2~254）, subnet mask
is 255.255.255.0，.
Step 2 Ping IP address of the ONT (Default address is 192.168.100.1). If the PC can get
right reply from Ping command, it is mean the connecting between the PC and ONT is
normal.
【Figure 1】
6
Note
：
Please don’t power off the ONT in the process of manage the ONT by the WEB
interface.
2.2 Login ONT
Step 1 Open the explore browser and input the ip address “http://192.168.1.1”
（ONTdefault IP）。
Step 2You need the user name and password for login. The default user name and
password are on the label of the ONT bottom. Default administrator user name and
password is “CUAdmin” and “CUAdmin”
【Figure 2】
7
After you login the ONT as the administrator, you can check, configure and change the
configuration of the ONT. Some of configuring and changing will take effect only after
restart the ONT.
Login success, a “Device Info” windows will show as bellow. There are eight item of the
status function. It is Summary , WAN, Statistics, Route, ARP, DHCP, Voice and optic.
2.3 ONT Authentication
1. In the navigation tree on the left, choose Management> ONT Authentication. In the
pane on the right, you can view or change the authentication mode f or the registration of
the ONT on the OLT, as shown in Figure.
2. LOID authentication mode.
As the previous figure, you should enter the LOID and Password. This will be used in the
authentication with the OLT.
3. Password authenticat io n mo de.
Enter the password and SN.
Loading...