CDA WC371, WC480 Installation, Use And Maintenance Manual
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu
www.cda.eu
WC371
Integrated
Intelligent
Dishwasher
Installation, Use and Maintenance
2
Contents
3 Important information
5 Important notes
6 Before first use
7 Using your dishwasher
10 Starting a programme
10 Changing a programme
11 Cancelling a programme
12 Detergent information
13 Salt information
14 Softener adjustment
16 Rinse aid information
17 Dishwasher basket information
19 Standard loading
21 Programme listing
23 Care and Maintenance
25 Fault code information
26 Troubleshooting
27 Electrical Information
29 Installation
33 Installation - final checks
3
Important
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance.
This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
This appliance has been designed for domestic use only. Commercial
use will invalidate the warranty.
4
EU Declarations of Conformity:
This product meets the requirements of all applicable EU directives
with the corresponding harmonised standards, which provide for CE
marking.
Availability of this manual in an alternative format:
A soft copy of this manual is available for download from www.cda.eu.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.
At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing appliance recycling services.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health. It also enables
the constituent materials to be recovered, saving both energy and
resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin .
5
Important
• Read the instructions prior to installation and use of the
appliance.
• Do not lean or climb on the open dishwasher door, to
prevent damage.
• Close the dishwasher door after use to prevent accidents.
• Use only detergents, salt and rinse aid specifically
designed for dishwashers.
• Do not put solvents in the dishwasher detergent
compartment to prevent risk of explosion.
• Only put dishwasher safe items into the dishwasher. If in
doubt, check with the manufacturer of the items.
• Take care when loading the dishwasher to observe the
recommendations for best loading practice, and also to
ensure that sharp objects such as knives are placed blade
down to prevent accidents.
• Do not open the dishwasher door when a programme
is running. If it is necessary to do so, then open it only
slightly to allow the dishwasher to pause the programme
and prevent any water spilling out. Remember that
the water in the dishwasher can be very hot when the
programme is running.
• When the dishwasher is not in use, we recommend
that you turn o the water supply at the supply tap and
disconnect the main supply.
• If you are leaving the dishwasher for an extended period
you should leave the door slightly open to prevent the
formation of unpleasant smells.
6
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• The plastic housing on the water inlet pipe contains an
electrically operated valve. The wires that connect to this
valve are inside the inlet hose. Do not cut through the inlet
hose and do not put the plastic housing in water.
• Children could get locked inside the appliance. Therefore,
when disposing of an old appliance cut o the plug and
set aside. Damage the door lock so that the door can no
longer be closed.
Recommendations
• To reduce energy and water consumption, remove all dirt residues
from the dishes prior to loading the dishwasher.
• Only run the dishwasher when fully loaded, unless half-load is active.
• Place hollow items (bowls, glasses and pans) face down in the basket.
Before first use
• Set the water softener level as required by the water hardness in the
area (see pages 14-15).
• Add 1kg of salt into the salt compartment and then fill with water to the
top of the salt compartment.
7
• Remove all the packaging materials from the interior of the dishwasher.
• Fill the rinse aid compartment.
• Run a hot programme without any dishes in the dishwasher.
Control panel
Power button (1)
• To switch the dishwasher on or o, press the power button (1).
When you switch on the dishwasher, the end of programme light
will illuminate, and two dashes will appear on the display.
Programme display (2)
The programme display shows the selected programme and the
remaining time to run. If there is a fault on the dishwasher, the fault
code will show on the display.
Programme selection button (3)
• To select a programme, press the programme selection button (3).
The dishwasher will store in its memory the last programme used.
8
Delay timer button (4)
The dishwasher is equipped with a variable timer of up to 19 hours’
duration at hourly intervals.
• To set the delay timer, press the delay timer button (4). This will
switch the timer on for one hour.
• To change the delay duration, press the delay timer button
again until the required delay duration is shown on the display,
alternating with the selected programme and the programme
duration.
• To cancel the delay timer, press the delay timer button again until
0h shows on the display.
3 in 1 function button (5)
The dishwasher is equipped with a tablet function that automatically
adjusts the amount of rinse aid and dishwasher salt used during a
programme.
• To use this function, press the button after selecting the
programme, before you close the door.
Prewash button (6)
The dishwasher is equipped with a prewash function that
automatically adds a prewash to the selected programme.
The prewash function improves the wash performance of the
programme, but also can change the temperature and duration of the
programme.
• To use this function, press the button after selecting the
programme and before you close the door.
9
The prewash is also an independent programme (8) which can be
used to rinse the contents of the dishwasher, for example if the
dishwasher is not yet full and a complete programme is not yet
required.
• To use this function, select the programme as described on page
10.
Half-load button (7) and indicator lights
The dishwasher is equipped with a half-load function that allows for
either the upper or lower basket to be washed independently, or for
both baskets to be washed if they contain only a small number of
dishes.
Salt and rinse aid warning lights (8)
When the dishwasher salt or rinse aid begins to run out, the warning
light will illuminate to advise that it needs refilling.
End of programme light (8)
When the programme is complete, the dishwasher will emit five beeps
and the end of programme indicator light will illuminate.
Please note: You should ensure that there are no dishes in the
upper basket when running a lower basket half-load programme,
and none in the lower basket when running an upper basket halfload programme.
If you have selected any extra function (3 in 1, prewash, half-load)
for a programme, this function will automatically be selected the
next time the dishwasher is used. To cancel the selection of any
10
extra function, press the specific extra function button (5, 6 or 7)
until the indicator light for that function goes out.
Starting a programme
• Press the Power button (the end of programme light will be
switched on)
• Press the Programme Selection button until the required
programme is shown on the display.
• If required, set the delay timer by pressing the Delay Timer button
• Once a programme is selected, the end of programme light will
switch o.
• When you close the dishwasher door, the programme will start
automatically.
Please note: The dishwasher stores the most recently used
programme in its memory. To change the programme, simply
press the Programme Selection button.
At the end of a programme
If possible, do not open the dishwasher door once the programme
has started.
At the end of a programme, the dishwasher will beep five times, and
the end of Programme Indicator light will switch on.
Changing a programme
It is possible to change the programme if necessary once the
programme has started.
• First open the door slightly to reduce the risk of water spillage.
• Press the programme selection button until the required
11
programme is shown on the display.
• Then close the door. The dishwasher will begin the new
programme from the point at which the old programme stopped.
Cancelling a programme
It is possible to cancel the programme once it has started.
• First open the door slightly to reduce the risk of water spillage.
• Press and hold in the Programme Selection button for three
seconds until the end of programme indicator flashes and a “1”
shows on the display.
• Then close the door. The dishwasher will run a drain cycle which
will take approximately 30 seconds. Once this is complete, the
dishwasher will beep five times and the end of programme light
will switch on.
Switching the dishwasher o
• Once the dishwasher beeps five times and the end of programme
light switches on, the dishwasher can be switched o by pressing
the Power button.
• Then turn o the water tap and remove the plug from the power
socket.
Please note: The dishwasher will automatically continue on the
programme it has started if the door is opened or in the event of a
power cut and once power has been restored or the door closed.
Loading...