CDA vw120, vw280, vw140 Manual For Installation, Use And Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

vw120, vw140 & vw280
Warming Drawers

Manual for Installation, Use and Maintenance

2

Important

The manufacturer cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product.
Please note that we reserve the right to invalidate the guarantee
supplied with this product following incorrect installation or misuse of
the appliance.

This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.

Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.

User information:

• Warming drawers become hot during and immediately after use.

Take care not to touch any of the internal components.

• The drawer may become hot during operation.

• After use, please ensure that the warming drawer is switched o.

• Keep children away from the appliance when in use, and

immediately after use.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

3

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in
compliance with safety requirements of Directive 73/23/CEE modified
by Directive 93/68/CEE for attribution of CE approval (Low voltage)
and requirements of EMC Directive 89/336/CEE modified by Directive
93/68/CEE for attribution of CE approval.
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety (LVD)
and Electromagnetic interference compatibility (EMC). Parts intended
to come into contact with food conform to CE Regulation 1935/2004.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing
appliance recycling services.

Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy

and resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out
wheeled dustbin.

4

Important

• Do not rest or sit on the drawer when open, as this will damage the

telescopic runners.

• The maximum capacity of the drawer is 25 kg.

• Do not cover the bottom of the warming drawer with aluminium foil

or other objects. Use only the supplied mat.

• Never pour water directly into the warming drawer.

• Do not use this appliance for heating liquids.

• To avoid scratching, do not drag dishes on the bottom of the

warming drawer.

• Use suitable containers or crockery.

• Residual condensation could eventually damage the warming

drawer and surrounding cabinets. It is advisable to:

- cover food;

- dry the inside of the warming drawer when it has cooled
down.

• Do not store plastic or ammable objects in the warming drawer.

• We recommend the use of oven gloves or adequate protection

when removing crockery from the drawer.

• Never insert objects (e.g. screwdrivers, sharp objects, papers, etc.)

in the heating element and ventilation slots.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR
EVENTUAL DAMAGES CAUSED BY FAILURE TO OBSERVE THESE
INSTRUCTIONS.

5

Before rst use

Before using the drawer for the first time we recommend that you
clean it with a damp cloth, then dry thoroughly.
Preheat the empty drawer for at least two hours at maximum

temperature. A slightly unpleasant smell may be produced, caused

by grease remaining on the heating element from the production
process.