CDA SVW141, SVW291 Manual For Installation, Use And Maintenance

1

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

SVW141/291 Drawers

Manual for Installation, Use and Maintenance

2

Important

This appliance must only be used for the purpose for which it is intended, i.e. warming crockery. Any other use
could be dangerous and may lead to premature failure of the appliance.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or
mental capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions
on how to use the appliance by someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably
qualified personnel.

User information:

• Warming drawers become hot during and immediately after use. Take care not to touch any of the internal

components.

• The drawer may become hot during operation.

• After use, please ensure that the warming drawer is switched o.

• Keep children away from the appliance when in use, and immediately after use.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the
event of a fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of Directive
73/23/CEE modified by directive 93/68/CEE for attribution of CE approval (Low voltage) and requirements of EMC
Directive 89/336/CEE modified by directive 93/68/CEE for attribution of CE approval.
This appliance has been manufactured to the strictest standards and complies with all applicable legislation,
including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into
contact with food conform to CE Regulation 1935/2004.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special

local authority dierentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out wheeled dustbin

.

3

Important

• Do not rest or sit on the drawer when open, as this will damage the telescopic runners.

• The maximum capacity of the drawer is 25 kg.

• Do not cover the bottom of the warming drawer with aluminium foil or other objects. Use only the

supplied mat.

• Never pour water directly into the warming drawer.

• Do not use this appliance for heating liquids

• To avoid scratching, do not drag dishes on the bottom of the warming drawer.

• Use suitable containers or crockery.

• Residual condensation could eventually damage the warming drawer and surrounding cabinets. It is advisable

to:

- cover food;

- dry the wet parts when the warming drawer is cold.

• Do not store plastic or ammable objects in the warming drawer

• We recommend the use of oven gloves or adequate protection when removing crockery from the drawer

• Never insert objects (e.g. screwdrivers, sharp objects, papers, etc.) in the heating element and ventilation slots.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES CAUSED BY FAILURE
TO OBSERVE THESE INSTRUCTIONS.

Before first use

Before using the drawer for the first time we recommend that you clean it with a damp cloth, then dry thoroughly.
Preheat the empty drawer for at least two hours at maximum temperature. A slightly unpleasant smell may be
produced, caused by grease remaining on the heating element from the production process.