CDA HVG620, HVG720 Manual For Installation, Use And Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

HVG620 & HVG720 Gas Hob

Manual for Installation, Use and Maintenance

2

Important

The manufacturer cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product.
Please note that we reserve the right to invalidate the guarantee
supplied with this product following incorrect installation or misuse of
the appliance.

This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.

Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified
personnel.

Appliance information:

Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.

Appliance Model
Serial Number

CE Declarations of Conformity:

This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Gas safety, Electrical

3

safety (LVD) and Electromagnetic interference compatibility (EMC).
Parts intended to come into contact with food conform to EEC/89/109.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.

Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.

Please note:

• Gas hobs become hot and remain hot during and immediately after

use. Do not touch the pan stands, burners or hob spill tray until the
appliance has been allowed to cool.

• Keep children away from the appliance when in use.

• After use, please ensure that the gas taps are in the ‘O” position.

• Ensure that the appliance is correctly adjusted for the type of gas

available before installation.

• The use of a gas appliance produces heat and humidity in the room

in which it is installed. Ensure that the room is well ventilated, either
by the use of natural ventilation outlets (e.g. windows) or a ducted
extractor.

4

• This hob (Class 3) has been designed for use only as a cooking

appliance. Any other use (e.g. heating rooms) should be considered
incorrect and potentially dangerous.

• These instructions are valid only for the countries of destination, the

symbols of which appear on the cover and on the appliance .

Using your hob

fig. 1

Gas burners:

1. Rapid burner 3.0kW

2. Left Semi-Rapid burner 1.75kW

3. Right Semi-Rapid burner 1.75kW

4. Auxiliary burner 1.0kW

Control panel:

5. Rapid burner control knob

6. Left Semi-Rapid burner control
knob

7. Right Semi-Rapid burner control
knob

8. Auxiliary burner control knob

Gas burners:

9. Auxiliary burner 1.0kW

10.Rapid burner 3.0kW

11.Rear semi-rapid burner 1.75kW

12.Front semi-rapid burner 1.75kW

13.Triple Ring / Wok burner 3.8kW

Control panel:

14. Auxiliary burner control knob

15. Rapid burner control knob

16.Triple Ring / Wok control knob

17. Rear semi-rapid burner control
knob

18. Front semi-rapid burner control

knob

10

9

11

12

13

14 15 16 17 18

5

Gas burners:

Gas flow to the burners is controlled by the control knobs (5, 6, 7 and
8 or 14, 15, 16, 17 and 18 on the diagram above). There are 3 positions
shown on the
control panel. Turning the control knob to the positions shown below
achieves the following:

Closed (OFF position)

Maximum position: Provides fast boiling function

Minimum position: Provides simmer function

The hob can be set to the desired position by turning the control knob
through the adjustment range in an anti-clockwise direction.

This appliance is class 3

Control knob graphics

6

Igniting the Burners

The hob is fitted with a flame failure device. Flame failure devices
operate by shutting o the supply of gas to the burner in the event
that the flame is extinguished accidentally.

To ignite the burners, follow these
instructions:

1. Lightly press the control knob down
and turn the knob anticlockwise to the
maximum position. Firmly press and
hold down the control knob to begin
the ignition process (a clicking sound
will be heard). Hold down the control knob for a few seconds after
ignition to allow the safety device to detect that the burner is lit.

2. Once the burner is lit, adjust the burner power to the required
position.

The hob is fitted with a flame failure device. Hold down the control

knob for a few seconds after ignition to allow the safety device
to detect that the burner is lit. Flame failure devices operate by
shutting o the supply of gas to the burner in the event that the
flame is extinguished accidentally.

Please note:

• The ignition device should not be operated for more than 15

seconds.

fig. 2