CDA hn6730 Manual For Installation, Use And Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

hn6730 Induction Hob

Manual for Installation, Use and Maintenance

2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance
or use in a commercial environment.

This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.

Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.

Appliance Model
Serial Number

CE Declarations of Conformity

This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety (LVD)
2006/95/EC and Electromagnetic interference compatibility (EMC)

3

2004/108/EC. Parts intended to come into contact with food conform
to 89/109/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.

Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.

Precautions before use

• Unpack the hob and all associated components, taking care not to

lose or mishandle any parts.

• We recommend that the appliance is installed by a suitably qualied

professional and connected to the electricity supply by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.

• The appliance must be installed in a purpose-designed kitchen unit

and worktop cut out as specified below.

• This hob (Class 3) has been designed for use only as a domestic

cooking appliance. Any other use should be considered incorrect
and therefore dangerous.

• Remove all labels and other packaging materials from the ceramic

4

surface prior to use.

• Do not modify the appliance in any way as this will invalidate the

guarantee and is potentially dangerous.

• The hob top is not designed for any use other than cooking: any

other use (e.g. as a worktop) is potentially dangerous and will
invalidate the guarantee.

• This appliance must be connected to xed wiring and suitably

earthed according to local regulations. Alternative connection,
through a 13A plug or through an extension lead must not be used.

• This appliance must not be installed above a dishwasher, washing

machine or tumble dryer as steam may damage the electronic
components.

Using the Appliance

• Always switch cooking zones o after use.

• Take particular care when cooking with oils or fats that may ignite.

• Cooking pans and utensils and the hob itself become hot during

use. Caution, risk of injury to people and pets both during and after
use.

• Ensure no cable from any other appliance can come into contact

with the hob top or pans during use.

• Magnetic objects (such as credit cards or portable electronic

devices) must not be placed near the hob during use.

• Do not place any metal object (other than suitable pans) on the hob.

• Never cover the hob with any cloth or other cover. This may
become hot and create a re hazard.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

5

capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children

without supervision.

• Metal objects such as knives, forks, lids etc. should not be placed

on the hob as they may become hot.

Precautions to protect the hob

• Use of damaged pans or those with raw cast iron bottoms may

damage the hob ceramic glass.

• Abrasive materials such as scouring cleaners and grits may damage

the ceramic glass.

• Avoid dropping objects onto the ceramic glass.

• Take care not to strike the edges of the hob with saucepans.

• Ensure that ventilation (as specied under installation instructions)

remains free from obstructions.

• Do not place empty saucepans on the hob.

• Sugar, synthetic plastics or aluminium foil must not be allowed
to come into contact with the heating zones; these may cause

permanent damage to the ceramic glass. If these should

accidentally fall onto the hob, turn it o immediately and carefully

remove them. Take care not to burn yourself.

• Never place any hot items on the control panel.

• If a drawer is located below the hob, ensure a horizontal divider is

installed leaving a minimum gap of 2cm above it for hob ventilation,
and protecting the drawer contents from striking the hob. The

6

divider must be made of material capable of withstanding 65°C
above ambient temperature.

• Never place inammable items or materials in a drawer or cupboard

below the hob.

Precautions in the event of an appliance fault

• If a fault is noticed, switch o the appliance and turn o the

electricity supply.

• Warning: If the ceramic glass is broken or cracked do not use the
appliance, turn o the electricity supply to avoid the possibility of

electric shock. Contact CDA Customer Support.

• There are no user-serviceable parts inside the appliance; all repairs

must be performed by a suitably qualified service engineer or
similar.

• See the “Troubleshooting” section in this manual, from page 20.

Other precautions

• Ensure that each pan is centred on its cooking zone; The pan base
must cover as much of the cooking zone as possible.

• Do not use aluminium or plastic containers: they could melt onto hot
cooking zones.

• The use of incorrect cookware or any induction adaptor plate

designed for non-magnetic cookware is outside the manufacturer’s
specifications so will invalidate the guarantee. The manufacturer
cannot be held responsible for any damage to the hob or
consequential damages as a result of such use.

7

FOR THOSE WITH HEART PACEMAKERS OR ACTIVE IMPLANTS:

The function of this hob conforms to current electromagnetic
interference standards and thus is in total compliance with legal
requirements (2004/108/CE directives).

To avoid interference between your hob and a pacemaker, your
pacemaker must be designed and programmed in compliance with
the regulations that apply to it. As such, CDA guarantee only that our
product is compliant.

With regard to the compliance of the pacemaker or any potential

incompatibility, you should obtain information from the manufacturer
or your attending physician.

8

Cooking On Induction

The principle of induction cooking is based on magnetic eect.

When you put your cookware on an induction zone and switch it on,

the electronic boards in the hob produce induced currents in the base
of the cookware and instantly raise its temperature. This heat is then
transferred to the food inside the cookware.

The best cookware to use with induction cooking has thick at bases,

as the heat will be better distributed so cooking more evenly.

Most cookware is compatible with induction cooking. There are three

ways to check the suitability of your cookware:

1. Use a magnet to see if the base of the pan is magnetic: if the

magnet sticks, then the cookware is compatible.

2. Place the pan on one of the cooking zones switched on to power
level 4: If the display remains on, then the cookware is
compatible. If the display ashes, the cookware cannot be used on

an induction hob.

3. Check the instructions or packaging of the pans for the symbols

indicating suitability for use with induction.

9

Using Your Hob

Fig.1

On / O

Zones:

1. Front left 2.0kW 175mm

2. Back left 1.4kW 175mm

3. Back right 3.0kW 215mm

4. Front right 1.4kW 175mm

1

2

3

4

Pause

Booster

Special

programmes

Slider control

Zone

indicator *

Timer

Zone timer

indicator

Control panel:

Power key

* NOTE: The zone indicators are for illustration only, the zones are controlled by the “Power keys”.

10

The table below oers guidance as to what each power level is for.

Using Your Hob

To switch the hob on

To switch the power on, touch the “On/O” key for approximately
two seconds. The hob will beep and all four zone displays will show
zero.

To switch the hob o

To switch the power on, touch the “On/O” key for approximately
two seconds

Please note: If a power level is not set within approximately twenty
seconds, the hob will switch o automatically.

To set the power level

• Touch the “Power key” for the zone required to activate it.

Note: The digital display showing power level is also the “Power key”.

• Then use the single slider key to control the power level by

touching anywhere along its length.

Power level Type of cooking

0 Switched o

1/2 Melting (butter/chocolate) or keeping food warm

2/3 Keeping food hot or to heat small quantities of liquid

3/4 Heat larger quantities of liquid (sauces etc.)

4/5 Slow boiling, e.g spaghetti, soups, stews, potatoes

6/7 Gentle frying

7/8 Browning meats, frying fish, omelettes

9 Fast frying steaks

11

To change the power level after it has been set

• To increase the power level for a zone: After touching the “Power

key” for that zone, slide your nger along the slider toward the

right.

• To reduce the power level for a zone: After touching the “Power

key” for that zone, slide your nger along the slider toward the left.

• After 5 seconds the dot goes out and the power level is set.

To switch the power o

To switch o a single zone, After touching the “Power key” for that
zone, touch the left hand end of its slider. This will set the power level
to zero.
When all the zones are at zero, the hob will switch o automatically

after approximately twenty seconds.

Alternatively, to switch o the hob immediately, touch and hold the
“On/O” key for approximately two seconds.

Bridge function

This feature allows you to connect the front and back heating zones
on the left side of the hob together thus merging 2 zones into one

larger one. This is particularly useful for cooking with large pans.

Note: the “Booster” function is not possible when the “Bridge”

function is in use.

To set the bridge function

Touch the “Power keys” for the front and rear left zones at the same
time. The symbol “ ” will show against the power level display for the
rear zone. Use the slider to set the power level required.

12

The heating level of the bridged zone is controlled just by using the
front left “Power key” followed by the slider.

To cancel the bridge function

Touch the “Power keys” for the front and rear left zones at the same
time again. The zone displays will show either “0” or “H” (residual

heat indicator).

Pause function

When one or more heating zones is active it is possible to pause

all cooking temporarily without losing the settings for the individual

zones. Cooking can then be resumed at the same settings when the

interruption is over. This is particularly useful when answering the
phone or other interruptions while cooking.

To set the pause function

Touch the pause key . The pause LED comes on and all cooking

zones turn o temporarily. They remain turned o until the pause

function is cancelled.

To cancel the pause function

Touch the pause key , then within ten seconds touch the slider.
Cooking will resume at the same settings as before the pause
function was activated.

Special programmes

The hob has an optional preset programmed heating level of 70°C

for each of the zones. This may be selected by touching the “Special

13

Programmes” key instead of using the slider to set the power level,
after touching the zone “Power key”.
This function may be set on all four zones independently.
The maximum duration for this function on each zone is 2 hours.

Booster

The hob is equipped with a booster function, allowing a higher power
level than the maximum for approximately ten minutes. This is only

applicable to the rear right and front left zones.

• To turn on the booster function: Touch the “Power key” for the

zone required then touch the booster key , “P” will show in the

display.

• To cancel the booster at any time, Touch the “Power key” for the

zone required, then touch anywhere along the slider.

Note: The hob is fitted with a power management system to limit the

total power used. When using the booster on one or more zones this
function may limit the power being used by other zones.

Auto-heat

Every zone is equipped with an auto-heat function, which reduces
the warming up time for the zone. To turn on the auto-heat function:

• Touch the “Power key” for the zone.

• Use the slider to select the maximum power level, “9”.

• Touch the maximum power end of the slider again: the display for

that zone will ash between “9” and “A”.

• Within ve seconds, use the slider select the power level required.

The display will alternate between the set power level and “A” for a

14

preset period of time. When auto-heating has nished the power

will reduce to the level set.

• If no nal power level is set, the auto-heat is switched o and the

zone will remain on power level “9”.

Timer

The hob is equipped with a timer that allows a finish time to be set for

the end of cooking on any zone, between a minimum of one minute

and a maximum of 99 minutes.

To set the timer

• Switch on the hob.

• Touch the “Power key” for the zone required.

• Use the slider to select the power level required.

• Touch the “Timer” display to select the timer: the “Zone timer

indicator” for that zone ashes.

• Use the slider to select the units of the time required.

• Touch the “Timer” display again to conrm the units setting.

• Use the slider to select the tens of units of the time required.

• Touch the “Timer” display again to conrm the tens of units setting.

• The time is conrmed, the “Zone time indicator” stops ashing and

cooking starts.

• At the end of the set cooking time the zone switches o, also the

“Timer” ashes “00” and the hob beeps.

To cancel the beeper: touch the “Timer” display once.

To cancel the timer

• Touch the “Power key” for the zone.

• Touch the “Timer” display to select the timer.

15

• Use the slider to reduce the units of the time to zero.

• Touch the “Timer” display again to conrm the units setting.

• Use the slider to reduce the tens of units of the time to zero.

• Touch the “Timer” display again to conrm the tens of units setting.

• The timer is now cancelled.

Please note: Cancelling the timer will not switch o the zone. You
should switch o the zone manually if required.

Please note: The power level can be adjusted during the
countdown using the “Power key” for the zone being timed,
followed by the slider.

Minute Minder

When no cooking zones are being used, the timer can be used as a

minute minder.

To Set the Minute Minder

• Switch on the hob.

• Use the slider to select the power level required.

• Touch the “Timer” display to select the timer: the “Zone timer

indicator” for that zone lights up.

• Use the slider to select the units of the time required.

• Touch the “Timer” display again to conrm the units setting.

• Use the slider to select the tens of units of the time required.

• Touch the “Timer” display again to conrm the tens of units setting.

• The time is confirmed and cooking starts.

• At the end of the set cooking time the “Timer” ashes “00” and the

hob beeps.

16

To cancel the beeper: touch the “Timer” display once.
To cancel the minute minder

• Touch the “Timer” display to select the timer.

• Use the slider to reduce the units of the time to zero.

• Touch the “Timer” display again to conrm the units setting.

• Use the slider to reduce the tens of units of the time to zero.

• Touch the “Timer” display again to conrm the tens of units setting.

• The timer is now cancelled.

Residual heat indicators

The hob is equipped with residual heat indicators to warn when any

of the zones are still hot to the touch after cooking. An “H” will show
in the relevant zone display after cooking until the zone is at a safe

temperature to touch.

In the event of a power cut, the residual heat indictors will illuminate
after the power supply is restored. However, when there is no power
supply to the hob the residual heat indicators will not work, so extra
care must be taken.

Please note:

You should avoid touching the zones when the hob is in use, or when
an “H” is showing on the zone display.

Pan detection

The hob is equipped with a sensor that will advise when the pan is

removed from the zone, or is unsuitable for use on induction hobs.
The zone display will show “U” until a suitable pan is placed on the
zone.

17

Recall function

Even after switching the hob o with the On/O key , it is still
possible to recall and re-use the settings that were last used. The

recall procedure is:

• Switch the hob back on using the On/O key

.

•

Touch the “Pause” key

within 6 seconds to recall the heating

settings, zone timers and heat up settings as they were before the
hob was switched o.

Key Lock

The hob is equipped with a key lock to lock the controls. This can be

used when the hob is o.

To switch on the key lock

• Touch the “On/O” key for approximately two second to switch

the hob on.

• Touch the “Booster” key

and the “Power key” for the front right

zone at the same time

• Within ve seconds touch the “Power key” for the front right zone

again.

• All four zone “Power keys” will show “L” to show the key lock is

activated and the hob will switch o.

To switch o the key lock

• Touch the “On/O” key

for approximately two second to switch

the hob on.

• Touch the “Booster” key

and the “Power key” for the front right

zone at the same time.

• Within ve seconds touch the “Booster” key

again: The hob

18

Fig.2

switches o

• Touch the “On/O” key for approximately two second to switch

the hob on.

Ecient Use of Your Hob

The hob is equipped with zones of dierent sizes, designed to
accommodate most shapes and sizes of pan. For best results,
only use pans with at bottoms and choose an appropriate zone
depending on the size of the pan. The most ecient use of the hob is
shown below, where the pan and zone are correctly chosen.

Use pan lids where possible to minimize the energy usage of your

appliance.

Zone Size Minimum Pan Size (cm) Maximum Pan Size (cm)

175mm 9 19

215mm 10 24

It is very important that the pans used on the hob are made of a
suitable material and have the correct type of base. The base of the
pan must be clean before use to prevent any scratches on the hob
top.

19

Care and Maintenance

Always disconnect the appliance from the power supply before
undertaking any cleaning or maintenance.

Important:

• Steam cleaners must not be used when cleaning this appliance. •

You should use a non-abrasive cleaner to clean the hob top. Any

abrasive cleaner (including Cif) will scratch the surface and
could erase the control panel markings.

• Sugar and starch can cause permanent damage to the surface of the

hob. Wipe away any spillages immediatly.

If your hob is not working:

1. Check that the zone is switched on.

2. Check that the mains supply has not been switched o.

3. Check that the fuse in the spur has not blown.

Types of residues Clean with Cleaning advice

Light

Cleaning sponge and soft

cloth

Wipe over the zone to be cleaned with a

sponge and hot water, and then wipe o with a

soft dry cloth.

Accumulated baked-on

stains/dirt, sugar spills or

melted plastics

Cleaning sponge or glass

scraper and soft cloth

Wipe over the zone to be cleaned with a

sponge and hot water, using a ceramic scraper

to remove any large marks or stains and then

wipe o with a soft dry cloth.

Rings and hard water

residues

White vinegar and soft

cloth

Pour a small amount of warm white vinegar

onto the stain, leave it to stand, and then wipe

o with a soft dry cloth.

Shiny metallic streaks

Cleaning agent for

vitroceramic glass etc.

Use specialist vitroceramic glass cleaner

(preferably one with silicone for its protective

properties)

20

In the event of a fault with the hob, please advise CDA Customer Care
of any fault code shown on the display

Contact CDA Customer Care
A: Customer Care Department, The CDA Group Ltd, Harby Road,

Langar, Nottinghamshire, NG13 9HY

T: 01949 862 012 F: 01949 862 003
E: [e-mail] W: www.cda.eu

Troubleshooting

On rst use

You observe that Possible Causes What should you do?

The hob does not work and all

the displays show “L”.

The key lock is set

Touch and hold the key lock key

to turn the key lock o.

Installation blows a fuse.

The electrical connection of the

hob is incorrect

Check that it is set up properly

(see the Electrical Connection

section)

You observe that Possible Causes What should you do?

The hob does not work and the

lights on the control panel do not

switch on.

Electrical connection fault. Check the power supply.

Protection circuit breaker or fuse

has tripped.

Replace the fuse or reset the

circuit breaker.

A small object, grease or water is

on one of the control keys.

Check the control keys are clean

and no objects are on them.

9 fast frying steaks

On switching on

21

IMPORTANT - PLEASE NOTE: In the event of any breakage, crack
or cracking – even minimal – of the vitroceramic glass, immediately
disconnect your appliance to prevent a risk of electric shock and
contact CDA Customer Care.

In use

You observe that Possible Causes What should you do?

One or all of the zones cuts out.

The safety system has cut out.

Leave hob to cool then try it

again

A cooking zone has been

running for a very long time

Switch it on again (if required).

One or more control keys are

covered.

Clear any objects and clean
liquid from the control area.

A pan has boiled dry and is

overheating.

Remove the pan in question.

The fan continues to run after the

hob is switched o.

This is not a fault, the cooling

system is working correctly.

Nothing.

“U” ashes on the zone display.

The cookware used is not

suitable for induction.

See page 8 for information on

cooking on induction

There is no pan on the cooking

zone.

Place a suitable pan on the

cooking zone.

The bottom diameter of the pan

is too small.

Place a larger pan on the

cooking zone.

“E” shows on the zone display.

The electronic system is

defective.

Contact CDA Customer Care for

advice.

“Er03” shows on the zone

display.

One or more control keys are

covered

Clear any objects and clean
liquid from the control area.

“E2” or “EH” shows on the zone

display.

The hob is overheated. Let it cool down, then try it again.

“E4” or “EC” shows on the zone

Configuration error.

Contact CDA Customer Care for

advice.

“E8” shows on the zone display.

The ventilation air inlet is

blocked.

Clear the ventilation air inlet.

22

Fitting the Hob

Unpacking the hob:

Take care not to lose or mishandle any parts.

Fitting position of the hob:

This appliance must be installed a minimum of 50mm from any
back wall and a minimum of 180mm away from any adjacent vertical
surfaces, e.g. a tall cupboard end panel. This may be reduced to
100mm if the adjacent surface is resistant to fire (tiles or steel, for
example). These dimensions are shown in Fig. 5.

Ventilation requirements:

This appliance must be installed to allow air to ow freely to the air

intake, from the air outlet and in the base and run of units into which it
is installed (Fig 3). An air gap of 20mm is recommended immediately
below the hob.

Failure to allow sucient ventilation could cause damage to the hob

and constitutes incorrect installation, which is not covered by the
warranty.

Notes:

• This could be a simple slot cut out of the plinth, or a dedicated

ventilation grille.

• The furniture top rail should not be tted to the unit. This allows the

induction hob to exhaust air into the kitchen space.

• The recommended ventilation sizes are for guidance only.

If tting a cooker hood above the hob:

If a cooker hood is to be installed above the hob, the height of

23

the hood above the hob must be at least 600mm (650mm is
recommended) (Fig. 4). If the instructions supplied with the hood
dictate that the hood must be installed at a height greater than
600mm, then that height is the minimum required.

Wall furniture requirements:

The minimum height of any cabinet immediately above the hob is
900mm. The minimum height of any adjacent units (including light
pelmets) is 400mm, unless they are manufactured from a material
resistant to fire (steel, for example).

Notes:

• Do not position this appliance above a refrigeration unit. The heat

generated may cause the refrigeration unit to fail.

• This appliance is designed to be installed into cabinet units capable

of withstanding temperatures of 65°C or greater above ambient
temperature.

• Never place perishable foods, soft items such as tea towels,

cleaning products or ammable items in the cupboard or drawer

below the appliance.

• If an oven is to be installed below the hob, the thermal safety system

on the hob will not allow the hob to be used at the same time as a
pyrolytic programme on the oven.

• The hob is equipped with an anti-overheating safety device that

can be activated if the hob is installed over an oven that is not

suciently ventilated. We recommend that you increase the

ventilation of the hob by creating an opening in the side of the
cabinet (8cm x 5cm).

24

How to Install the Hob:

Overall dimensions of the hob:

Width: 590 mm Depth: 520 mm

Worktop cut-out dimensions:

Width: 560 mm Depth: 490 mm

1. Make the required hole in the

worktop. Before doing this, you must
check the instructions supplied with
any cooker hood to ensure that you
will have the required clearance. The
cut-out (Fig. 5) shows a 60mm gap
from the wall to the cut-out edge.
The distance from the hob, when
fitted, to the back wall is 50mm.

If a splashback/worktop upstand is

to be fitted, take this into account
when cutting the hole. The minimum
distance that the hob should be
positioned away from the rear wall or
splashback is 50mm.

2. Fix the foam seal underneath the

appliance by following the outline of
the worktop upon which the hob will
rest. This ensures an airtight seal with
the worktop. Do not use silicone type
sealant.

Fig.3

Fig.4

400mm

600mm

600mm minimum
(650mm recommended)

Ho b

Top rail removed to allow air to exit.

Recommended 560mm x 6mm

Air intake into the run of units.

Recommended 560mm x 10mm

A ventilation slot may need to be cut
into the base if there is no ventilation
provided.

Recommended 560mm x 25mm

65mm

470mm

550mm

150mm150mm

60mm

490mm

560mm

190mm190mm

Fig.5

25

Mains Electricity Connection

Warning! this appliance must be earthed

We recommend that the appliance is connected by a qualied

electrician, who is a member of the N.I.C.E.I.C. and who will comply
with the I.E.T. and local regulations.

This hob is intended to be connected to permanent fixed wiring by
a double pole switch, having a contact separation of at least 3mm in
all poles. The switch must be positioned no further than 2m from the
appliance.

Please note:

• The mains cable must only be replaced by a qualied electrician

or service engineer and must be of equivalent or better rating (i.e.

2.5mm2, HO5V2V2/F).

• This appliance is intended to be connected to the mains supply with

a cable of cross section area 2.5 mm2. A larger cable will not fit the
terminal connections.

• The marking of the current rating of the fuse or circuit breaker

protecting this appliance should be marked on the socket outlet.

• Assembly and electrical connection should be carried out by

specialised personnel.

• When installing this product we recommend you seek the help of

another individual.

• Ensure that the brass links are securely tted. Failure to do so will

prevent the hob from operating correctly.

• Protection against live parts must be ensured after installation.

• Connection data is printed on labels on the hob casing close to the

26

connection box.

• As the appliance is not tted with an accessible plug, a means of

disconnection from the power supply must be must be included in
the fixed insatllation, in accordance with the installation regulations.

• The inlet cable must be positioned so that it does not touch any of

the hot parts of the hob or oven.

Caution

• This appliance must only be connected to a 230V ~ 50Hz network.

• Observe the connection diagram (below).

• The connection box is located underneath at the back of the hob

casing. To open the cover use a medium screwdriver. Insert it in the
slits to open the cover.

The following diagram shows the mains connection:

* Calculated using the diversity factor following the standard EN 60

335-2-6/1990.

Fig.6

AC 220-240V 50/60Hz 25A*

E
N
L

27

Appliance electrical rating: 7100W

Any service call arising from incorrect installation may result in a
charge.

CDA and its representatives cannot be held responsible for any
matters resulting from incorrect connection, or related to either the
absense of an earth connection or a faulty earth connection.

Please contact our Customer Care Department for Service on the details below

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu