CDA HCG 731, HCG 741 User Manual

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
GB
HCG 731 .. - HCG 741 ..
Cooking Hobs
Manual for Installation, Use and Maintenance
2
This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment.
The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a semi commercial, commercial or communal environment.
These instructions are only valid for those countries whose identification symbol appears on the cover of the instruction booklet and on the appliance.
The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance.
Appliance Information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
Declaration of CE Conformity
This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should be considered incorrect and therefore dangerous. This hob has been designed, constructed and put on to the market in conformity with: – Safety requirements of EU Directive "Gas" 2009/142/EC; – Safety requirements of EU Directive "Low Voltage" 2006/95/EC; – Protection requirements of EU Directive "EMC" 2004/108/EC; – Requirements of EU Directive 93/68/EEC.
3
Important Safeguards and Recommendations
– Do not carry out any cleaning or maintenance without first disconnecting the appliance from the
electrical supply. – During and after use of the hob, certain parts will become very hot. Do not touch hot parts. – After use always ensure that the control knobs are in the “” OFF position. – Young children should be supervised to ensure that they do not play with the appliance. – Keep children away from the hob during use. – Children, or persons with a disability which limits their ability to use the appliance, should have a
responsible person to instruct them in its use. The instructor should be satisfied that they can use the
appliance without danger to themselves or their surroundings. – Do not allow young children or infirm persons to use the appliance without your supervision. – WARNING! When correctly installed, your product meets all safety requirements laid down for this
type of product category. However special care should be taken around the underneath of the appliance
as this area is not designed or intended to be touched and may contain sharp or rough edges, that may
cause injury. – Fire Risk! Do not leave inflammable materials on the hob top. – Make sure that electrical cords connecting other appliances in the proximity cannot come in to contact
with the hob top. – Never use a damaged appliance. Get it checked or repaired: “see appliance servicing”. – When the appliance is not being used, it is advisable to keep the gas tap closed. – Regular lubrication of the gas taps must only be carried out by qualified engineers. Contact Service in
case of problems with the operation of the gas taps. – Before disposing of an unwanted appliance, it is recommended that it is made inoperative and that all
potentially hazardous parts are made harmless.
– If the supply cord is damaged, it must be replaced by a special cord by a qualified electrical
technician in order to avoid a hazard.
Before Using for the First Time
– Read the instructions carefully before installing and using the appliance – After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use the appliance
and contact your supplier or a qualified engineer. – Remove all packaging and do not leave the packing material (plastic bags, polystyrene, bands etc ) in easy
reach of children as they may cause serious injury. The packaging materials are recyclable. – The appliance should be installed and all the gas/electrical connections made by a qualified engineer in
compliance with local regulations in force and following the manufacturer’s instructions. – Do not attempt to modify the technical properties of the appliance, as it may become dangerous to
use.
4
9
8
5
6
7
1
1
2
4
3
2
2
4
3
2
9
8
5
6
7
Features and Technical Data
HCG 741 .. HCG 731 ..
Fig. 1a Fig. 1b
Cooking Points
1. Auxiliary burner (A) - 1,00 kW
2. Semi-rapid burner (SR) - 1,75 kW
3. Rapid burner (R) - 3,00 kW
4. Triple ring burner (TR) - 3,50 kW
This appliance is class 3
Control Panel
5. Auxiliary burner control knob (1)
6. Rear left semi-rapid burner control knob (2)
7. Triple ring burner control knob (4)
8. Rapid burner control knob (3)
9. Front right semi-rapid burner control knob (2)
Note:
– The electric ignition is incorporated in the knobs. – The appliance has a safety valve system fitted. The flow of gas will be stopped if and when the flame
should accidentally go out.
Caution:
– If the burner is accidentally extinguished, turn the gas off at the control knob and wait at least 1 minute
before attempting to relight.
– Gas hobs produce heat and humidity in the environment in which they are installed. Ensure that the
cooking area is well ventilated by opening the natural ventilation grilles or by installing an extractor
hood connected to an outlet duct.
If the hob is used for a prolonged time it may be necessary to provide further ventilation by opening a
window or by increasing the suction power of the extractor hood (if fitted).
5
How to Use the Hob
Gas Burners
Gas flow to the burners is adjusted by turning the knobs (illustrated in fig.2) which control the valves. Turning the knob so that the indicator line points to the symbols printed on the panel achieves the following functions:
– Symbol : Tap closed (burner off)
– Symbol
– Symbol
– The maximum aperture position permits rapid boiling of liquids, whereas the minimum aperture position
allows slower warming of food or maintaining boiling conditions of liquids. – To reduce the gas flow to minimum, rotate the knob further anti-clockwise to point the indicator
towards the small flame symbol. – Other intermediate operating adjustments can be achieved by positioning the indicator between the
maximum and minimum aperture positions, and never between the maximum aperture and closed
positions.
Caution! The cooking hob becomes very hot during operation. Keep children well out of reach.
: High (maximum)
: Low (minimum)
Fig. 2
6
Lighting Gas Burners
In order to light the burner, you must:
1 – Press in the corresponding knob and turn counter-clockwise (fig. 3) to the full flame position marked
by the
In the case of a mains failure light the burner with a match or lighted taper.
2 – Wait about ten seconds after the gas lighting before releasing the knob (starting time for the valve).
3 – Adjust the gas valve to the desired power.
Important
If the burner flame should go out for some reason, the safety valve will automatically stop the gas flow. To re-light the burner, return the knob to the closed position, wait for at least 1 minute and then repeat the lighting procedure. If your local gas supply makes it difficult to light the burner with the knob set to maximum, set the knob to minimum and repeat the operation.
symbol and hold the knob in until the flame has been lit.
Fig. 3
7
Choice of Burner
The symbols printed on the panel by the side of the knob indicate which burner you are controlling. Choose a suitable burner depending on the cookware diameter and capacity. The pan diameter should be suitable for the burner power to make the most of the burner's high efficiency and not waste fuel. A small pan does not boil more quickly on a large burner (fig. 4).
Fig. 4
Burner Size Minimum Pan Diameter (cm) Maximum Pan Diameter (cm)
Auxiliary 12 14
(1)
Semi-Rapid 16 24
Rapid 24 26
Triple Ring 26 28
(2)
Wok
front right burner, maximum diameter 22 cm.
(1)
- 36
(2) Wok pans have to be used only with the special grille fitted (see correct use of triple-ring burner).
8
Correct use of Triple-Ring Burner
The flat-bottomed pans are to be placed directly onto the pan-support. To use the WOK you need to place the proper stand in order to avoid any faulty operation of the triple­ring burner (Figs. 5a - 5b - 6a - 6b). Important: The wok pan stand (fig. 5b - 6b) MUST BE PLACED ONLY over the pan-rest for the triple ring burner.
Model:
WRONG CORRECT
HCG 731 ..
Fig. 5a
Fig. 6a
Fig. 5b
WRONG CORRECT
Fig. 6b
Model:
HCG 741 ..
Loading...
+ 16 hidden pages