CDA HCG621, HCG611, HCG601 User Manual

HCG601 / HCG611 / HCG621

Manual for Installation, Use and Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this

product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect

installation or misuse of the appliance or use in a commercial environment.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental

capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use

the appliance by someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualiﬁed

personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a

fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including

Gas safety, Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into

contact with food conform to EEC/89/109.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer

providing appliance recycling services.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health. It

also enables the constituent materials to be recovered, saving both energy and resources. As a reminder of the need to

dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Please note:

• Gas hobs become hot and remain hot during and immediately after use. Do not touch the pan stands, burners or

hob spill tray until the appliance has been allowed to cool.

• Keep children away from the appliance when in use.

• After use, please ensure that the gas taps are in the ‘Off” position.

• Ensure that the appliance is correctly adjusted for the type of gas available before installation.

• The use of a gas appliance produces heat and humidity in the room in which it is installed. Ensure that the room is

well ventilated, either by the use of natural ventilation outlets (e.g. windows) or a ducted extractor.

• This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should

be considered incorrect and therefore dangerous.

Using your hob

HCG601

6 7 8 9

2 3

HCG611 / HCG621

Gas burners:

1. HCG611 triple ring/wok burner 3.5kW

HCG621 triple ring/wok burner 3.6kW

2. Left semi-rapid burner 1.75kW

3. Right semi-rapid burner 1.75kW

4. Auxiliary burner 1.0kW

5. Rapid burner 3.0kW

6 7 8 9

Fig.1

Gas burners:

Gas ﬂow to the burners is controlled by the control knobs (6, 7, 8

and 9 on the diagram above). There are 3 positions shown on the

control panel. Turning the control knob to the positions shown

below achieves the following:

Closed (OFF position)

Control panel:

6. Triple Ring/Rapid burner control knob

7. Left Semi-Rapid burner control knob

8. Right Semi-Rapid burner control knob

9. Auxiliary burner control knob

This appliance is class 3

Maximum position: Provides fast boiling function

Minimum position: Provides simmer function

The ﬂame can be set to the desired position by turning

the control knob through the adjustment range in an anti-

clockwise direction.

Igniting the Burners

To ignite the burners, follow these instructions:

1. Lightly press the control knob (shown on the right) and turn the knob anti clockwise to the maximum position. Press and hold the control down to begin the ignition process (a clicking sound will be heard).

2. Once the burner is lit, adjust the burner power to the required position. To turn the burner off, turn the knob clockwise past the maximum setting to the off position.

Some models are ﬁtted with a ﬂame-failure device (designated by ‘F’ in model number). If your hob is ﬁtted with such a device, hold down the control knob for a few seconds after ignition to allow the safety device to detect that the burner is lit. Flame-failure devices operate by shutting off the supply of gas to the burner in the event that the ﬂame is extinguished accidentally.

Please note:

• The ignition device should not be operated for more than 15 seconds.

• If a burner does not ignite, or turns off accidentally, turn the control knob

to the ‘off’ position, and wait for one minute before attempting to reignite the burner.

• If the burner does not ignite, repeat the ignition process with the burner at

the minimum position.

Efﬁcient use of your Hob

The hob is equipped with burners of different sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with ﬂat bottoms and choose an appropriate burner depending on the size of the pan. The most efﬁcient use of the hob is shown below, where the pan and burner are correctly chosen.

Fig.2

Ensure that the pans do not overlap the edge of the pan stand, or cover the control panel.

The table below shows the sizes of pan that should be used with each burner:

Burner Size

Auxiliary

Semi-Rapid

Rapid

Triple Ring

Wok

Minimum Pan Diameter (cm)

Fig.3

Maximum Pan Diameter (cm)

+ 8 hidden pages