CDA HCC762 User Manual

HCC762 Ceramic Hob
Manual for Installation, Use and Maintenance
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
Important
The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this
installation or misuse of the appliance or use in a commercial environment.
This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental
capacity, or who lack experience or knowledge about it, unless they have had supervision or instructions on how to use
the appliance by someone who is responsible for their safety.
Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified
personnel.
Appliance information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a
fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including
Electrical safety (LVD) 2006/95/EC and Electromagnetic interference compatibility (EMC) 2004/108/EC. Parts
intended to come into contact with food conform to 89/109/EC. This appliance also conforms to requirements of
directive 93/68/EEC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer
providing appliance recycling services.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy and resources. As a reminder of the need to dispose of
household appliances separately, the product is marked with a crossed-out wheeled dustbin.
1
Please note:
Before operating this hob, please read the instructions carefully
After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use the appliance and contact your
supplier.
Remove all packaging and do not leave the packing materials in easy reach of children as they may cause serious injury. The
packaging materials are recyclable.
Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance.
Ceramic hobs become hot and remain hot during and immediately after use. Do not touch the hob until it has been allowed
to cool.
After use, please ensure that all the zones have been switched off.
Keep children away from the appliance when in use.
Pan handles should never stand out beyond the edge of the worktop. This will ensure children cannot reach them.
Do not use pans with rough bases (e.g. cast iron) as these may scratch the hob surface.
Ensure the base of the saucepan is clean and dry before placing it on the zone.
Do not switch on the zones without cookware in place.
Do not lean over the hob when it is in use.
Do not drop heavy or sharp objects on to the hob top.
Do not scratch the hob top with sharp objects.
Follow the cleaning instructions carefully.
Never put cooking foil or plastic materials on the hob top when it is hot. These materials could melt and cause damage to
the hob.
Do not leave inflammable materials on the hob top.
Never use the hob top for storage or as a worktop.
Do not leave wet or damp pan lids on the hob.
Important
Do not use the hob if the glass surface is cracked or damaged to prevent risk of electric shock, Disconnect it from the power
supply.
Do not use the hob if the electrical cord is damaged.
When correctly installed, this hob meets all the safety requirements laid down for this type of product. However, special
care should be taken around the underneath of the appliance as this area is not designed or intended to be touched and may
contain sharp or rough edges, that may cause injury.
This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should be
considered incorrect and therefore dangerous.
This appliance is not intended to be operated by any means of an external timer or separate remote control system.
Make sure that electrical cords connecting other appliance do not come into contact with the hob top.
Before disposing of an unwanted appliance, it is recommended that it is made inoperative and that all potentially hazardous
parts are removed.
2
Using your hob
Zones:
1. Front left 0.7/2.1 kW 120/210 mm dual
2. Rear left 1.2 kW 140 mm
3. Rear right 1.1/2 kW 145 x 270 mm dual
4. Front right 1.2 kW 140 mm
5. Touch control panel
32
The Touch Control
1 Dual zone key 2 Minus key (for all zones) 3 Timer key 4 Plus key (for all zones) 5 Zone selection key 6 Childlock key 7 Power key 8 Timer display 9 Timer zone indicator 10 Zone display 11 Dual zone indicator 12 Childlock indicator
Fig.1
Fig.2
1
5
9 10 11 12
8
31 2 4 5 6 7
4
3
How to use the hob
The ceramic surface of the hob allows fast transmission of heat vertically from the heating elements under the glass to
the pans on the hob top.
The heat does not spread horizontally, so the hob top remains relatively cool only a few centimetres from the zone in
use.
To switch the hob on
Touch and hold
Please note:
If a zone is not selected within 10 seconds, the hob will automatically switch off.
To switch on a zone
Once the hob is switched on, touch
active.
Touch and hold
the zone display.
If required, touch
To adjust the power level once set
Touch
Touch and hold
To use the dual zone
The dual zones are formed of two separate coils of resistant material.
Once the zone is switched on, touch
switch on when the dual zone is on.
To switch off a zone
Touch
EITHER Touch
OR Touch
The zone display will show 0 for approximately eight seconds before showing H to indicate the residual heat.
To switch the hob off
Touch and hold
.
until the zone displays show 0 or H and the zone indicators flash.
for the zone required. The zone indicator will switch on to confirm the zone is
to select the power level from 1 (minimum) to 9 (maximum). The power level selected will show on
again to deactivate the touch control for the zone.
for the zone required. The zone indicator will switch on to confirm the zone is active.
or until the required power level shows on the zone display.
at any time to switch the dual zone on or off. The dual zone indicator will
for the zone required.
and at the same time.
until the zone display shows 0.
at any time.
4
Loading...
+ 11 hidden pages