CDA FWV460 User Manual

FWV460

Manual for Installation, Use and Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109.4

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain signiﬁcant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Please note:

This appliance is designed solely to produce ice cubes and dispense chilled water. Other types of use are not permitted and may prove dangerous. The CDA Group Ltd will not be held liable for any damage caused by incorrect use of the appliance

• Read all instructions thoroughly before use.

• Before ﬁrst use, you must allow the icemaker to settle for at least twenty four hours prior to switching the power on.

• To protect against ﬁre, electrical shock and injury to persons do not immerse cord or plugs in water or other liquid.

• The use of accessory attachments not recommended by The CDA Group Ltd may result in ﬁre, electric shock or injury.

• If the appliance is switched off, you should allow ﬁve minutes before switching it on again to prevent unnecessary

damage to the compressor.

Icemaker

Display

Control Panel

Water Nozzle

Ice Drawer

Water Tray

Drip Tray

Icemaker control panel

ON OFF

1 2 3 4 5 6

1. On button

2. Off button

3. Water glass button – this button dispenses a small amount of water.

4. Water jug button – this button dispenses a large amount of water.

5. Manual water button – this button dispenses water as long as the button is pressed.

6. Maintenance button – this button allows the icemaker to automatically empty the pipes.

The Icemaker

Before ﬁrst use:

1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.

2. Fill the water tank (even if the appliance is to be plumbed in to the mains water supply).

3. Turn on the machine at the switch on the left side of the machine.

4. Push the machine back into the housing.

5. Switch on the machine by pressing the ON button.

6 The machine is now ready for use and the display shows ICE ON WATER READY.

The water tank

It is possible to use the appliance without connecting it to the mains water supply. There is an integral water tank which can be used in this instance. To ensure the best results from your appliance, it is recommended that the water tank be emptied frequently and reﬁlled with fresh water, and no water be left in the tank for long periods.

When the water tank is empty, the message WATER MISSING will show on the display.

To ﬁll the water tank:

1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.

2. Open the lid of the water tank and ﬁll it until the water is 4cm from the top level. Then close the lid.

3. Push the machine back into the housing.

Please note:

You should follow the steps below in order to remove any impurities from the system and ensure best performance

from your ice maker. Failure to carry out this simple procedure could cause problems or damage to the workings of the

icemaker.

1. Turn off the mains water supply, if applicable

2. Use a sterilising solution such as Milton ﬂuid to clean the removable ice drawer and the ice drawer housing. Follow

the instructions supplied with the sterilising solution to ensure the ice drawer is thoroughly cleaned.

3. Fill the internal water tank with 2.5l of water then add a spoonful of bicarbonate of soda to the water.

4. Use the water empty function (press and hold and , then press before emptying the water tank by

holding ) to ﬂush the system through with the bicarbonate solution from the water tank.

5. Repeat steps 3 and 4.

6. Fill the water tank with 2.5l of water

7. Use the water empty function (press and hold and , then press before emptying the water tank by holding

) to clear out any bicarbonate solution remaining.

8. Repeat steps 6 and 7.

9. Turn the ice maker off

10. Turn the mains water supply back on, if applicable, or ﬁll the water tank.

11. Turn the ice maker on. Normal operation will resume.

+ 8 hidden pages