CDA FF820 Manual For Installation, Use And Maintenance

1

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

FF820 freestanding full height
larder fridge

Manual for Installation, Use and Maintenance

2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please

note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse

of the appliance.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had supervision or instructions on how to use the appliance by

someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified

personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/
EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical

safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to

EEC/89/109.4

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. The refrigeration system contains insulating

gases and refrigerants, which require specialised waste disposal. The valuable materials contained in this appliance can be recycle.

It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.

Before disposing of an old appliance, remove the latch or bolt lock to avoid the risk of child entrapment.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving

from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and

resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out

wheeled dustbin.

3

Before first use

You must allow the fridge to settle for at least twenty four hours prior to switching the power on.

It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of soda and warm

water and then thoroughly drying the interior.

The fridge may have an odour to it at first use. This will disappear as the appliance cools.

Do not load the fridge with food until at least 2 hours have passed and the fridge is close to correct temperature.

Please note:

• The appliance will work continuously until it comes down to the correct temperature.

• If the appliance is switched off, you should allow five minutes before switching it on again to prevent unnecessary

damage to the compressor.

Use

• Do not use electrical devices inside the refrigerator.

• Do not damage the refrigerant circuit.

• Do not use flammable solvents near the appliance.

• Do not place heavy items on top of the refrigerator.

• Do not splash water onto the top or back of this appliance.

• Never put liquids in the refrigerator uncovered.

• Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being

put into the refrigerator.

• Nothing should rest against the internal rear wall of the refrigerator, as this will cause frost and possible

condensation problems which will be difficult to remove.

• Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance.

• This is a household appliance, which is produced in accordance with the national standard. It is intended for food storage only,

not for storage of blood, medicine and biological products.

• To prevent risk of fire, keep the appliance away from petrol or any other inflammables.

• To prevent risk of electromagnetic interference or other accidents, do not place a microwave oven on top of the refrigerator

or use any electric appliance inside the refrigerator.

• Do not allow children to play with or near the appliance.

• Do not splash water onto the appliance. Keep it away from places of high humidity that may have adverse effect on the

electric insulation performance.

• This appliance is designed to be used in ambient temperatures between 10 and 43˚C. Use outside of this range may cause the

appliance to fail.

4

Control Panel

Switching the fridge on and off

To switch on the fridge for the first time, press and hold the On/Off key (A) for three seconds. The fridge will beep twice, and
will run at the factory preset temperature of 5°. To switch the fridge off, press and hold the On/Off key for three seconds.

Setting the temperature

Press the increase or decrease temperature keys (B & C) to select the required temperature between 2° and 8°. Once the

required temperature is shown on the display, the temperature will set after five seconds’ delay and the fridge will beep twice to

confirm the setting.

The fridge will take some time to adjust to the new settings. This will depend on the difference between the old and new settings,

the ambient temperature, the amount of food in the fridge and the number of times the door is opened.

High humidity function

The fridge is equipped with a high humidity function which can prolong the life of some foods. To switch on the high humidity

function, press and hold the high humidity key for three seconds. The high humidity indicator will show on the display and the

fridge will beep twice to confirm the setting. To switch the high humidity function off, press and hold the high humidity key for

three seconds. The high humidity indicator on the display will switch off and the fridge will beep twice to confirm the setting.

Please note:

The temperature will show on the display for 30 seconds after the door has been opened, or a key has been pressed on the

control panel before switching off automatically. To switch the display on, press any key.

In the event of a power failure, the fridge temperature settings will be restored to the programmed levels when the power returns.

Over temperature alarm

The fridge is equipped with an over temperature alarm to warn when the termperature in the fridge has been over 15° for

six hours or more. The fridge will beep ten times every thirty minutes until the fridge temperature is below 10°, and the fault

code E9 will show on the display. Press any key to switch the alarm off. E9 will continue to show on the display until the fault is

resolved.

D

A

B

C

A On/Off key

B Increase temperature key

C Decrease temperature key

D High humidity function key

E High humidity indicator

fig. 1

E