CDA ECA SERIES, EVA SERIES Installation, Use And Maintenance Manual

EU Declarations of Conformity:

This appliance has been designed, constructed and marketed in
compliance with safety requirements of EU Directive 2014/35/EU
(Low voltage) and requirements of EU Directive 2014/30/EU (EMC).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.

4

• Steam cleaners must not be used when cleaning this appliance.

• The performance of your extractor will vary depending on a number

of factors. These include: type of extraction, length of ducting, room
volume, ventilation available and cleanliness of the filters.

Note:

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.

5

Using Your Extractor (ECA Range)

Control Panel

A - Light button
B - Speed level buttons
C - Power o button

To switch the extractor light on or o:

• Press button “A”.

To switch on the extractor or to change the speed at any time when
the extractor is running:

• Press the relevant “B” button for the first, second or third speed level

as required.

To switch the extractor o:

• Press button “C”.

Fig. 1

A B

C