CDA CW493, CW493 WH, CW493 BL, CW493 SS User Operating Instructions Manual

Integrated

Dishwasher

CW493 BL/WH/SS

Users Operating Instructions

Before operating this appliance,

please read these instructions carefully

Guarantee

CDA appliance carry a five-year parts and one-year labour guarantee.

CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be
free of both labour and parts charges. After the first year and within five years, the parts will be supplied free of charge
provided that the repair is carried out by an agent authorised by CDA and the labour will be charged at the commercial rate
applicable at the time of repair.

The appliance must have been installed by a suitably qualified person and in accordance with the manufacturers instruc­tions and current legislation. The guarantee does not cover faults caused by the incorrect fitting of the appliance.

Limit of Cover

The guarantee does not cover cosmetic damages e.g. discolouration or oxidisation.
Proof of purchase or installation date must be produced before a service call will be booked.
The appliance must be used for domestic purposes only. Appliances used for commercial or professional purposes are
not covered by this guarantee.
The appliance must not be modified or tampered with or repair attempted by any unauthorised person.
The guarantee does not cover damage caused by transit or by misuse, accident, abuse or neglect.
The guarantee does not cover routine maintenance.
Use of parts not supplied or recommended by CDA will invalidate the warranty.
Rubber seals, filters, removable glass parts, control knobs and buttons, fuses and light bulbs which need replacing
periodically are not covered by the guarantee.
Second hand or reconditioned appliances are not covered by the guarantee.

•

•

•

•

•

•

•

•

•

The conditions under which this guarantee is offered are in addition to the statutory rights of the domestic purchaser and
these rights are not affected by this guarantee.

CDA reserve the right to change specification without prior notice.

The symbol on the product or on its packaging indicates that this product may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electri­cal and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by inap­propriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.

.1.

IMPORTANT
Carefully read the instructions contained in this manual, as it pro­vides information that is essential to safe and proper installation,
use and maintenance of this appliance.

This appliance complies with following EEC

directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent
modifications;

- 89/336/EEC of 03/05/89 (Electromagnetic
Compatibility) and subsequent modifications.

- Carefully dispose of the packing material.

- After removing the packing, check to make sure that the appli­ ance is not damaged. If in doubt, contact a qualified professional.

- The dishwasher must only be used by adults for the washing of
household dishes and cooking utensils.

- Fundamental rules to follow when using the appliance:
* Never touch the dishwasher with wet hands;
* We discourage the use of extension cords and multiple sockets;
* During installation, the power supply cord must not be exces­ sively or dangerously bent or flattened;

Safety Is Very Important

* If the appliance is not operating properly or, requires
maintenance, disconnect the appliance from the power supply.

- Keep detergents out of the reach of children. Also keep children
away from the dishwasher when it is open to reduce the risk of
injury.

- This appliance cannot be installed outdoors, not even if the
area in which it is installed is covered by a roof. It is also very
dangerous to leave it exposed to the rain and elements.

- Do not touch the heating element during or after a wash cycle.

- Do not lean or sit on the door when it is open, as this could
overturn the dishwasher.

- If the appliance malfunctions, turn off water supply to the appli­ ance and disconnect the plug from the wall socket. Then, con­ sult the section entitled, "Troubleshooting." If you cannot re­ solve the problem, contact a service centre.

- Only specialised personnel are authorised to make repairs.

- Appliances which are being discarded must be made
inoperable by cutting the power supply cord and removing the
door lock.

- The appliance must be positioned so that the plug is accessible.

- If installing this dishwasher on a carpeted floor, ensure the car
pet does not obstruct the opening.

- If the supply cord is damaged, it must be replaced by the manu­facturer or an authorised service agent.

Close-up View (Control Panel)

A
B
C
D
E

ON-OFF Light
ON-OFF Button
Low Salt Indicator Light
Low Rinse Aid Indicator Light

"RAPID" Button

F
G
H
I

"Eco" Button
"HALF LOAD" Button

A B C D

I H G F

E

Knob For Selecting Cycle

Handle For Opening Door

GB

.2.

Close-up View (Interior)

A
B
C
D

Upper Rack
Rack Height Adjustor
Top Spray Arm
Lower Rack

E
F
G
H
I

Washing Filter

Bottom Spray Arm

Detergent and Rinse Aid Dispenser

Technical Characteristics

Width

60 cm

Depth

58 cm

Height

82 cm

Capacity

12 standard place settings

Mains water pressure

0.03-0.6 MPa

Power voltage

220-240V~ 50Hz

2150W

Total absorber power

Salt Container Cap

Third Sprayer

GB

.3.

Salt......

Salt

The hardness of the water varies from place to place. If hard
water is used in the dishwasher, deposits will form on the dishes
and utensils.
The appliance is equipped with a special softener that uses a salt
specifically designed to eliminate lime and minerals from the water.

Loading the Salt into the Softener

Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should
be filled as follows:

- Remove the lower rack and then unscrew and remove the cap
from the salt container;

- If you are filling the container for the first time, fill it with water;

- Place the end of the funnel (supplied) into the hole and intro­ duce about 2 kg of salt. It is normal for a small amount of water
to come out of the salt container.

- Carefully screw the cap back on.

The salt container must be filled when the "low salt" indicator light
appears on the control panel.

To prevent the formation of rust, load the salt just before begin­ning a wash cycle.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjusting the amount of
salt consumed based on the hardness of the water used. This is
intended to optimise and customise the level of salt consumption
so that it remains at a minimum.
To adjust salt consumption, proceed as follows:

- Unscrew the cap from the salt container;

- There is a ring on the container with an arrow on it (see figure to
the side).

- If necessary, rotate the ring in the anticlockwise direction from
the "-" setting towards the "+" sign, based on the hardness of
the water being used.
It is recommended that adjustments be made in accordance with
the following scheme:

Water Hardness

Clarke
degrees

ºdH

mmol/l

Selector
position

Salt
consumption
(Grams/cycle)

Autonomy
(cycles/2kg)

014 MNT MNIT

NIUQIQNUQQNQPS

PSTN QRUV QIRUIV

[UV[TN [UIV

L

=?J?

jba

LM

OM

QM

SM?H?

SM

QM

OR

Level

1

2

3

4

GB