CDA CVC11SS Manual For Installation, Use And Maintenance

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
CVC11SS
Manual for Installation, Use and Maintenance
The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance.
Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel.
Appliance information:
Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes.
Appliance Model
Serial Number
CE Declarations of Conformity:
This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.
This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109.4
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.
Please note:
This appliance is designed solely to produce coffee and steam. Other types of use are not permitted and may prove dangerous. The CDA Group Ltd will not be held liable for any damage caused by incorrect use of the appliance
Read all instructions thoroughly before use.
To protect against fire, electrical shock and injury to persons do not immerse cord or plugs in water or other liquid.
The use of accessory attachments not recommended by The CDA Group Ltd may result in fire, electric shock or injury.
1
The Coffee machine
Front and Overall View
1 - Lighting 2 - Steam dispenser 3 - Holder for grinding 4 - Coffee dispenser 5 - Water tank
Control Buttons and Display Panel
9 - Power button - Press to turn machine on and off (Standby) 10 - Number of cups button - Press to select between 1 and 2 cups 11 - Coffee size button - Press to select between short, medium and long options 12 - Make coffee button - Press to begin the coffee making process 13 - Steam button - Press to dispense steam from the steam nozzle 14 - Maintenance button - Press to perform a cleaning cycle
2
6 - Coffee bean container 7 - Water tank 8 - On/Off switch
9 10 11 12 13 14
fig. 1
fig. 2
1 2
3
5
4
6
7
8
First use
This coffee machine has one water heater, which allows for ideal temperatures for coffee and steam for cappuccino. The steam can also be used to preheat the cups.
This coffee machine can grind coffee beans when they are needed, ensuring they are freshly ground for the very best flavour.
To stop the coffee machine dispensing – if less than the preset amount is required – simply press
at any point when the
coffee is dispensing.
The grinding level of the coffee beans can be adjusted depending on personal preference to either a coarser or finer grind.
Before first use:
1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.
2. Fill the water tank (if the coffee machine is not to be plumbed in to the mains water supply) and the coffee container (as described below).
3. Turn on the machine at the switch on the top right side of the machine.
4. Push the machine back into the housing.
5. Switch on the machine by pressing
6. With a cup or container in place, press to dispense a cup of hot water through the steam nozzle.
7. The machine is now ready for use.
The water tank
It is possible to use the coffee machine without connecting it to the mains water supply. There is an integral water tank which can be used in this instance. To ensure the best results from your coffee, it is recommended that the water tank be emptied frequently and refilled with fresh water, and no water be left in the tank for long periods. When the water tank is empty, the message WATER MISSING will show on the display.
To fill the water tank:
1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.
2. Open the lid of the water tank and fill it until the water is 4cm from the top level. Then close the lid.
3. Push the machine back into the housing.
Please note:
You should only use cold drinking water in this coffee machine, with water hardness level less than 7˚F.
The water tank can be removed for cleaning, following the steps above, and then lifting it out of the machine.
The coffee container
You should use only beans for espresso coffee in this machine. Other substances, such as ground coffee, instant coffee, beans treated with caramel, sugar or similar substances should not be used as they can damage the grinder or machine. When the coffee container is empty, the message COFFEE MISSING will show on the display.
To fill the coffee container:
1. Pull the machine out of its housing by lifting the handle of the machine and pulling it towards you.
2. Remove the lid of the coffee container and fill it until the coffee beans are 2cm from the top level. Then replace the lid.
3. Push the machine back into the housing.
3
4
FINE
The Coffee Machine
Press to switch on the coffee machine After a few seconds, GOOD MORNING or GOOD AFTERNOON will show on the display. The machine will heat up, and COFFEE and STEAM will flash on the display. Once the machine is ready for use, COFFEE and STEAM will illuminate constantly, as will the size and number of the coffees last selected (for example 1 SHORT). If COFFEE continues to flash, add coffee beans to the container. If STEAM continues to flash (non-mains plumbed coffee machines only) add water to the water tank.
Making espresso coffee
1. Select the number of coffee cups
The coffee machine can prepare one or two cups of coffee simultaneously.
To select the number required, press
.
2. Select the coffee size
The coffee machine is equipped with three preset coffee size. To select the size required, press
to select from the following options: SHORT - 52ml NORMAL - 67ml LONG - 145ml
It is possible to programme into the memory the amount of coffee dispensed for each of the sizes of coffee cup. To do so follow the steps below.
1. When the coffee is being made, press
until the required amount has been dispensed.
2. The display will show MEMO?
3. Press
to select the size that is to be set.
4. Press and hold
to confirm the setting. Wait for the coffee machine to beep twice and the display to stop
flashing before releasing the button.
3. Make the coffee
1. Place the cup or cups under the dispenser spout.
2. Press
to start dispensing. The coffee machine will dispense the selected amount of coffee. To stop the coffee
machine dispensing before the end of the preset programme, press
again.
Dispensing steam
1. Press
to select steam and wait for STEAM to stop flashing on the display.
2. Place the cup or container under the steam nozzle.
3. Press and hold
to dispense the steam. Release the button when sufficient steam has been dispensed.
Please note:
Ensure that the spout is placed in a cup or container before pressing
, as hot steam can cause scalding.
Always use the handle to move the water spout.
Loading...
+ 11 hidden pages