CDA CD 60, CD 61, CD 62 User Operating Instructions Manual

Flush-fitting hob -
front controls
CD 60 - CD 61 - CD 62
Before operating this hob,
please read these instructions carefully
Users Operating Instructions
GB
2
Rating Plate
Dear Customer, Thank you for choosing one of our products.
The warnings and tips given below are intended to pro­tect your safety and that of others. They will also help you make the most of your appliance.
Keep this booklet in a safe place. It will be useful if you, or anyone else, have any questions about use of the appli­ance.
This appliance must only be used for the purpose for which it was designed, i.e. for cooking foods.
Any other use should be considered incorrect and therefore dangerous.
The manufacturer is not responsible for damage caused by improper, incorrect or irresponsible use of the appliance.
TIPS FOR THE USER
During and immediately after use some parts of the hob can reach very high temperatures. Do not touch them.
Keep children away when the hob is in use.
After using the hob make sure that all of the knobs are turned off. Turn off the main tap of the gas supply pipe or the cylinder tap if appropriate.
When you are not using the hob it is a good idea to turn off the gas supply tap.
Regular lubrication of the gas taps must only be performed by qualified engineers. If the gas taps are not working properly call the After-Sales Service.
WARNINGS FOR THE USE OF ELECTRICAL APPLIANCES
When using any electrical appliance some important rules must always be followed. In particular:
do not touch the appliance with wet or damp hands or feet
do not use the appliance with bare feet
this appliance should only be used by responsible adults.
3
IMPORTANT WARNINGS AND TIPS
When unpacking the appliance make sure that it is not damaged. If you have any doubts, do not use the appliance but consult your supplier or an engineer.
The packing materials (plastic bags, expanded polystyrene, nails, bands etc.) must not be left within easy reach of children, as these may result in serious injury.
The packaging material is recyclable and is marked with the recycling symbol .
Do not try to alter the technical properties of the appliance, because this could be dangerous.
The manufacturer cannot be considered responsible for damage caused by improper, incorrect or irresponsible use of the appliance.
Before disposing of any unwanted appliances it is recommended that all potentially hazardous parts be made harmless.
The appliance should be installed and all the electrical connections made by a quali­fied engineer in compliance with local regulations in force and following the manu­facturer's instructions.
CE Declaration of conformity
This hob is intended to come into contact with food products and conforms with European Directive 89/109/EEC.
This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e.g. heating rooms) should be considered incorrect and therefore dangerous.
This hob has been designed, constructed and put on to the market in conformity with
Safety requirements of the "Gas" Directive 90/396/EEC;
- Safety requirements of the "Low Voltage" Directive 73/23/EEC;
- Protection requirements of the "EMC" Directive 89/336/EEC;
- Requirements of Directive 93/68/EEC.
These instructions are only valid for those countries whose identification symbol appears on the cover of the instruction booklet and on the appli­ance.
4
COOKING POINTS
1. Rapid burner (R) - 3,00 kW
2. Left medium-speed burner (SR) - 1,75 kW
3. Right medium-speed burner (SR) - 1,75 kW
4. Auxiliary burner (A) - 1,00 kW
CONTROL PANEL
5. Rapid burner control knob (1)
6. Left medium-speed burner control knob (2)
7. Right medium-speed burner control knob (3)
8. Auxiliary burner control knob (4)
This appliance is class 3
NOTE:
The electric ignition is incorporated in the knobs
Gas hob
Model: CD 60
Figure 1
2
8
765
3
4
1
5
This appliance is class 3
NOTE:
The electric ignition is incorporated in the knobs
COOKING POINTS
1. Triple-ring burner (TR) - 3,30 kW
2. Left medium-speed burner (SR) - 1,75 kW
3. Right medium-speed burner (SR) - 1,75 kW
4. Auxiliary burner (A) - 1,00 kW
CONTROL PANEL
5. Triple-ring burner control knob (1)
6. Left medium-speed burner control knob (2)
7. Right medium-speed burner control knob (3)
8. Auxiliary burner control knob (4)
Gas hob with triple-ring burner
Models: CD 61 - CD 62
Figure 2
Model: CD 61
Model: CD 62
2
8
765
3
4
1
2
8
765
3
4
1
6
GAS BURNERS
Gas flow to the burners is adjusted by turning the knob illustrated in fig. 3 which con­trols the safety valves. Turning the knob so that the indicator line points to the symbols printed on the panel achieves the following functions:
full circle = closed valve
symbol = maximum aperture or flow
symbol = minimum aperture or flow
The maximum aperture position permits rapid boiling of liquids, whereas the minimum aperture position allows slower warming of food or maintaining boiling conditions of liquids. To reduce the gas flow to minimum, rotate the knob further anti-clockwise to point the indicator towards the small flame symbol. Other intermediate operating adjustments can be achieved by positioning the indicator between the maximum and minimum aperture positions, not between the maximum aperture and closed positions.
LIGHTING OF BURNERS
To ignite the burners follow these instructions: –
Lightly press the knob (fig. 4) in an anti-clockwise direction up to the maximum aperture
(symbol ); press the knob right down to prime the electric ignition until the burner lights.
In case of power cut manually light the burner. – Adjust the burner according to the power required. If the burner fails to ignite repeat the ignition with the knob on “minimum” position.
Figure 3 Figure 4
Use Of the Hob
Loading...
+ 14 hidden pages