CDA 3U10 Installation, Use And Maintenance Manual

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

www.cda.eu

3U10 Extractor

Installation, Use and Maintenance

2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note
that CDA reserve the right to invalidate the guarantee supplied with
this product following incorrect installation or misuse of the appliance
or use in a commercial environment.

This appliance is not designed to be used by people (including
children) with reduced physical, sensorial or mental capacity, or
who lack experience or knowledge about it, unless they have had
supervision or instructions on how to use the appliance by someone
who is responsible for their safety.

Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.

Appliance information:

Please enter the details on the appliance rating plate below for
reference, to assist CDA Customer Care in the event of a fault with
your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Gas safety, Electrical
safety (LVD) and Electromagnetic Interference Compatibility (EMC).

3

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special
local authority waste collection centre or to a dealer providing
appliance recycling services.

Disposing of a household appliance separately avoids possible
negative consequences for the environment and health. It also
enables the constituent materials to be recovered, saving both energy
and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin .

Please note:

• Under no circumstances should the extractor be

connected to any gas ventilation system, flue system or
hot air ducting system.

• Do not vent the extractor into an attic or loft space.

• Only install the extractor in rooms with adequate

ventilation. Remember that the extractor is powerful and
whatever air is extracted needs to be replaced.

• Do not tile the extractor in. It should be removable for

service or maintenance.

• Do not use silicone sealant to secure the extractor to the

wall.

• You must be able to isolate the extractor from the mains

electrical supply after installation.

4

• Steam cleaners must not be used when cleaning this

appliance.

• The performance of your extractor will vary depending

on a number of factors, such as supply voltage and
cleanliness of the filters.

Note:

For best performance, you should switch on the extractor 15 minutes
before starting to cook and leave it to run for approximately 15
minutes after the end of cooking.

Using Your Extractor

A - Light key

B - Minus key

C - Speed indicator

D - Plus key

E - Timer key

Fig. 1

A EDCB

5

To switch the extractor on:

• Touch the “Plus” key (D) to start the extractor running at the lowest

speed.

Setting the extractor speed when it is running:

The extractor may run at a choice of 4 speeds, indicated by the
“Speed indicator” lights (C) on the control panel.

• To increase the speed touch the “Plus” key (D). The speed will

increase by one increment for each touch of this key.

• To decrease the speed touch the “Minus” key (B). The speed will

decrease by one increment for each touch of this key.

Energy saving functions:

To help save energy:

• After 5 minutes of running at the 4th (highest) speed the motor

automatically reduces to the 2nd speed.

• After 7 minutes of running at the 3rd speed the motor automatically

reduces to the 2nd speed.

To switch the extractor o:

• Touch the “Minus” key (B) several times to turn the extractor to its

lowest speed setting, then once more to turn it o.

To switch the light on or o:

• Touch the “Light” key (A).

6

The timer function:

The timer function sets the extractor to switch itself o after ten
minutes have passed. This is ideal when you leave the kitchen after
cooking as the extractor can be left to clear the air then switch o to
save power, without you disturbing your meal to switch it o.

• To set this function, touch the “Timer” key “E”. The “Speed

indicator” will start to flash to show this function has been activated.

• To cancel this function, press either the “Plus” or “Minus” button (D)

or (B).

Care and Maintenance

IMPORTANT : DO NOT PERFORM MAINTENANCE OR CLEANING
OF THE EXTRACTOR WITHOUT FIRST SWITCHING OFF THE
ELECTRICITY SUPPLY.

Cleaning

You should use a nonabrasive cleaner. Any abrasive cleaner
(including Cif) will scratch the surface.
You can clean your extractor eectively by simply using a dilute
solution of water and mild detergent and drying to a shine with a clean
cloth, for example the CDA E-Cloth.

Cleaning the grease filters

The grease filters should be kept clean to minimise the risk of fire.
The grease filters may be removed then cleaned with hot soapy
water. You can also wash the grease filters in a dishwasher, ensuring
that you place them in an upright position to prevent damage from
other items in the dishwasher.