CCTV Center AP-B9550VRTL User Manual

USER'S MANUAL

SUPER RESOLUTION CAMERA

1. Specifications

2. Features

1) HLC(Highlight Compensation)

When the image is in front of strong background lighting,

your camera allows you to get the clear image.

2) SENS UP(Fine Picture Condition Under Very
Low Illumination)

1/3"inch density CCD and digital processor permit high
quality pictures to be captured in very low light condition.

3) High Resolution

The horizontal resolution of 580TVL lines can be achieved
by using a SONY CCD having Double Speed 410,000pixels
noiseless and reliable pictures.

4) OSD

Your Camera detects motion of object without sensor
outside.

5)DIS (Digital Image stabilizer)

You can control a lot function on the screen.

6) DNR (Digital Noise Reduction) CHIP

It has an assistant DSP chip that can remove image
noise efficiently and it shows clean and obvious image
in low luminance.

7) DAY/NIGHT

In normal or high luminance, camera maintains color
mode. On the contrary, it get changed into B/W mode
in low luminance.

Please read this manual thoroughly before operation and
keep it handy for further reference.

3. Camera OSD Control

UP

RIGHTLEFT

DOWN

SETUP(MENU):Push Down

Press this control To do this

UP, DOWN Select a new item

LEFT, RIGHT

Select a menu item

SETUP(MENU)

4. OSD Menu Structure

SETUP MENU

5. SETUP Menu Functions

1) LENS

<Option : DC / MANUAL>

2) EXPOSURE

<Option : SHUTTER/AGC/SENS-UP/RETURN>

Adjusts exposure settings.

SHUTTER :
FLK - Flicker-less mode (FLK) reduces on-screen flickering.
ESC - Electronic Shutter Control (AUTO) adjusts brightness
level on screen.
Manual - Manual mode allows you to adjust the shutter speed
from 1/60~1/120,000 of a second (NTSC), or 1/50~
1/100,000(PAL).
AGC : Adjusts value of AGC gain. Increase the GAIN level to
brighten the picture. (noise / distortion may develop)
SENS-UP : Automatically provides a clear image under low­ light conditions. You can control the maximum low-light
magnification from 2x to 256x (increasing magnification may
cause noise/distortion). DSS is deactivated when SHUTTER
is set to FLK mode.

CAMTITLE SYNC

MOTION DET

PRIVACY

DIS LANGUAGE

RESET

RETURN

3) WHITE BAL.

<ATW / INDOOR / OUTDOOR / AWC->SET /

Controls color on the screen.

ATC : Select Auto Tracking White Balance (ATW) when the

color temp. is 1800°K~10500°K.

2) SYNC

<Option : INT / L/L>

INT = Synchronize the vertical interval
sync pulse of your camera with other
equipment to reduce the effect of

picture roll on the monitor.

LENS Option

EXPOSURE

WHITE BALANCE

BACKLIGHT

DNR

DAY/NIGHT

IMAGE ADJ.

SPECIAL

EXIT

BLC / HLC / OFFBack Light Compensation

ON / OFF (8 Zone)PRIVACY Function

Built - inOn Screen Display

ON / OFF (8 Zone)Motion Detection

52dB (Weight On)S/N ( Y signal)

ON / OFFDigital Noise Reduction

ATW/AWC/MANUAL/INDOOR/OUTDOOR

WHITE BALANCE

0.05Lux (Color), 0.00002Lux (Sense-up)Min. Illumination

AUTO/OFF ( x2 ~ x256)

SENS-UP

1/60 ~ 1/200,000 secElectric Shutter Speed

LOW / MIDDLE / HIGHGain Control

580 TV LineResolution

1.0V [p-p] Composite, 75ΩVideo Output

2 : 1 Interlaced 525 Lines / 60Fields / 30FramesScanning System

1 : 1.3 ~2.0Maximum Aperture Ratio

768(H) x 494(V) , 1/3” CCD

Effective Pixels

811(H) x 508(V) , 1/3” CCD

Total Pixels

1/3” SONY SUPER HAD CCD,

410,000 pixels

Image Sensor

DC 12V ( Option : AC24V )Power Source

Super High Resolution SeriesITEM

Access a submenu

DC MANUAL

SHUTTER

AGC

SENS-UP RETURN

BLC HLC OFF

ON OFF

COLOR B/W

AUTO

ATW

INDOOR OUTDOOR

AWC->SET

MANUAL

FREEZE

V-REV

D-ZOOM SHARPNESS

H-REV
RETURN

Selects Lens Type.

EXTERN

color temp. is 1800°K~10500°K.
INDOOR : Select this when the color temp. is 4500°K~
8500°K.
OUTDOOR : Select this when the color temp. is 1800°K
~10500°K (sodium light inclusion).

AWC->SET : Set the point the camera towards a sheet of

white paper and press the SET button.
Manual : It allows you to increase or decrease the red or
blue factor on screen.

4) BACKLIGHT

<Option : BLC / HLC / OFF>

BLC : Provides light level control to overcome severe
backlighting conditions.
HLC : High Light Compensation. Removing the high light

and it makes possible to view the image clearly.

5) DNR

<Option : ON / OFF>

Reduces noise/distortion on the screen, Increasing the
DNR level reduces noise but may introduce video artifacts.
DNR is deactivated if AGC is turned off.

6) DAY/NIGHT

<Option : COLOR/BW/AUTO/EXTERN>

COLOR : Full time color mode.
BW : Full time black and white mode.

AUTO : Automatically detect color or black/white

EXTERN : Same function as "AUTO", but with external sensor

such as CDS sensor.

6. SPECIAL Menu Functions

On the SETUP menu, press the menu control UP or DOWN
and then select SPECIAL.
Press the SETUP(MENU) control to access the SPECIAL
MENU.

1) CAMTITLE

<Option : OFF / ON>

UP, DOWN, LEFT, RIGHT menu control = Select a
character, then press (SETUP)MENU to accept it. The
character is saved and the title cursor at the bottom of the
screen moves to the next position.
← → = Go back or forward in the title name to make changes.
CLR = Delete the entire name and start again.
POS = Position the camera title on the screen.
Press (SETUP)MENU to confirm the position.
END = Accept the new name.

Display a name and/or number
on the monitor.

To add a camera title:

INTERNAL = When line lock is not required.
LINELOCK = Adjust the vertical phase(VPH) from 000 ­ 359 (factory default is 0). Line line is only available with
24VAC power.

RETURN = Press MENU to return to the SETUP menu.

equipment to reduce the effect of

picture roll on the monitor.

L/L (Line Lock) = Adjust the phase from

0° ~ 359°.

3) MOTION DET

<Option : OFF / ON>

SENSITIVITY : Select 8 different Motion Detection area. When
sensitivity number is high, it can recognize even small
movement.

AREA MODE : Activate or deactivate the selected area.

SEL POS : Select setting point from 4 different point, Left-Top,
Left-Bottom, Right-Top and Right-Bottom.
YPOS : Move setting point to vertical direction.
XPOS : Move setting point to horizontal direction.
FILL  SET : Fills selected area with proper color.

Detect moving objects in 8 different
areas on screen;
‘MOTION DETECTED’ is displayed on
the screen when movement is detected.

4) PRIVACY

<Option : OFF / ON>

Mask up to 8 areas of the screen from video monitoring.

AREA SEL = Select up to 8 motion detection area.

AREA mode : Activate or deactivate the selected area.

MASK COLOR : Select area color.
TRANSP : Adjust the transparency of selected area.

RETURN : Save the settings and return to the SPECIAL menu.

5) DIS

<Option : OFF / ON>

Digital Image Stabilizer. Reduce picture movement due to
external factors.

6) LANGUAGE

Choose language that should be displayed.

7) RESET

Restore all factory default settings.

8) RETURN

Return to the main SETUP menu.

This manual is based on the date as shown in the right and
specifications are subject to chage without notice for quality

VER.090714

7) IMAGE ADJ.

<Option : FREEZE / V-REV / H-REV
D-ZOOM / SHARPNESS / RETURN>

FREEZE : To view still or moving pictures.
V-REV : Flip the picture vertically on the screen.
H-REV : Flip the picture horizontally on the screen.
D-ZOOM : Digital zoom of x1 ~x10.
SHARPNESS : Sharpen the image on screen.
Excessive sharpening may cause picture noise.

RETURN : Save the settings and return to the SETUP menu.