CCTV HCAM675B, HCAM676B User Manual
1/3” CCD SONY SUPER HIGH R
ESOL
UTION
COLOR DAY & NIGHT CAMERA
ART. HCAM675B-HCAM676B
Please read this manual thoroughly before use, and keep for
future reference.
Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo)
http://www.comelitgroup.com e-mail:export.department@comelit.it
WARNINGS AND CAUTIONS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT INSERT ANY
METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON
THE EQUIPMENT.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated
''dangerous
voltage'' within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
PRECAUTIONS
Safety
Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by
qualified personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to
be used for several days or more.
To disconnect the cord, pull it out by the plug. Never
pull the cord itself.
Allow adequate air circulation to prevent internal heat
build-up.
Do
not place the unit on soft surfaces (rugs,
carpets,
sofas,
etc.)
or
near
materials
(curtains, draperies) that may block the ventilation
holes.
Installation
Do not install the unit in an extremely hot place or in a
place
subject
to
excessive
dust,
mechanical
vibration.
Cleaning
Clean the unit with a slightly damp soft cloth.
Use
a
mild
household
detergent.
Never
use
strong solvents such as thinner or
benzine as
they might damage the finish of the unit.
Retain the original carton and packing materials for safe
transport of this unit in the future.
ii
IMPORTANT SAFETY INSTRUCTIONS
1
.
Read these instructions
.
2
.
Keep these instructions
.
3
.
Heed all warnings
.
4
.
Follow all instructions
.
5
.
Clean only with dry cloth
.
6
. Do not
block any ventilation openings
. Inst
all in accordance
with
t
he manufacturer’s instructions
.
7
. Do not
install near any hea
t
sources such as radiators
,
hea
t
registers, stoves, or other apparatus (including amplifiers) that produce
hea
t.
8
. Do not defeat the safety
purpose o
f the
polarized or grounding-type plug
.
A polarized plug has
two
blades with one wider
t
han
the ot
her. A
grounding type plug has two blades and a third grounding prong. The
wide blade or
the t
hird prong are provided
for
your safety
. If the
provided plug does no
t fit into
your outle
t,
consult an electrician
for
replacement o
f the
obsolete outle
t.
9
.
Protec
t the
power cord
f
rom being walked on or pinched
particularly at plugs, convenience receptacles, and the poin
t
where they
exi
t f
rom
the
apparatus
.
10
.
Only use attachments/accessories specified by the manufacturer
.
11
.
Use only with the car
t, st
and
, t
ripod, bracket or table
specified by
the
manufacturer or sold with
the
apparatus. When a cart is used, use caution when
moving
t
he cart/apparatus combination
to
avoid injury
f
rom tip-over
.
12
.
Unplug this apparatus during lightning storms or when
unused for long periods o
f t
ime
.
13
. Refer
all servicing to qualified service personnel
.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been moisture, does not operate normally, or has
been dropped
.
14
.
CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK
OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING
OTHER THAN THAT CONTAINED
IN
THE OPERATING
I
NSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO
.
15
.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only
.
iii
FCC COMPLIANCE STATEMENT
INFORMATION TO THE USER:
THIS EQUIPMENT HAS BEEN TESTED
AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED
TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL
INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED
AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION:
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
CE COMPLIANCE STATEMENT
WARNING:
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
iv
CONTENTS OF PACKAGE
Inst
allation o
f the
camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes
.
Carefully remove the color camera and its accessories from the carton
and verify tha
t t
hey were not damaged in shipmen
t.
The contents o
f the
package include
:
1. Camera in Housing
1
2
. Inst
ruction Manual (This Document)
1
3. Accessory Ki
t for
installing
1
4. Drilling guide label
1
v
TABLE OF CONTENTS
INTRODUCTION ----------------------------------------------------------------------------------------- 1
CAMERA CONNECTION & CONTENSTS of PACKAGE ------------------------------------- 2
CONTENTS of PACKAGE & QUICK INSTALL -------------------------------------------------- 3
OSD MENU STRUCTURE ---------------------------------------------------------------------------- 5
AUTO WHITE DEFECT & LENS ADJUSTMENT ---------------------------------------------- 12
SPOT OUT / JOY STICK KEY --------------------------------------------------------------------- 13
EXTERNAL DIMENSIONS---------------------------------------------------------------------------- 14
SPECIFICATIONS ------------------------------------------------------------------------------------- 15
vi
1
INTRODUCTION
The camera provides high-quality images using SONY 1/3” CCD and digital
Signal process LSIs
.
Features:
●
1/3"
EXview HAD CCD
Ⅱ for an
image of high sensitivity
●
2.
8~12 mm D/N Varifocal (DC AI)
/
5~50 mm D/N Varifocal (DC AI)
●
Digital Wide Dynamic Range (Adaptive Tone Reproduction)
●
Excellent picture quality
●
700 lines of resolution
●
Minimum illumination of 0.15 Lux (Color)
/ 0
Lux (B/W & IR ON)
●
Auto
electronic shutter [1/60 (1/50) ~ 1/10000] and manual electronic
shutter modes
●
OSD (On Screen Display)
●
Auto
and manual white balance modes
●
Auto
BLC and HLC, Day & Night (Auto)
●
2D-NR
●
Smar
t IR
●
Privacy Zone 4 poin
t, Mot
ion Detection 4 Poin
t
●
MI
RROR, SHARPNESS, HUE, CONTRAST, GAIN
●
AGC (Auto Gain Control)
●
VI
DEO OUT (BNC)
●
Int
ernal sync
.
●
Operates in 12VDC or 24VAC
(
If
using 12VDC power adaptor, please use a power supply capable o
f
supplying over 600mA)
●
Use Certified
/
Listed Class 2 power source only
.
●
Auto
White Defect detection
●
IP67 protection
I
MPORTANT: the user o
f t
his camera is responsible for
checking and complying with local, state, and federal laws and
statutes concerning the recording and monitoring of audio
signals
.
Loading...