CCTV 41657, 41659 User Manual
17” – 19” PROFESSIONAL LCD COLOUR MONITOR
ART. 41657 - 41659
Via Don Arrigoni, 5 24020 Rovetta S. Lorenzo (Bergamo)
http://www.comelit.eu e-mail:export.department@comelit.it
2
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION:
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended.
to alert the user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the
presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
3
Risk of electric shock – Do not open
To reduce the risk of electric shock, do not remove the back cover. There are no user-serviceable
parts inside.
Removing the back cover voids the warranty.
Have your LCD AV repaired by qualified service personnel only.
Warnings and precautions
Do not place your hands, face, or objects close to the ventilation openings of you LCD AV. The
top of your LCD AV gets very hot from exhaust air that is released through the ventilation
openings. Burns or personal injuries may occur if you are too close the LCD AV. Damage may
occur if you place any object near the top of your LCD AV.
Disconnect all cables before moving you LCD AV. Moving you LCD AV with its cables
attached may damage the cables and cause fire or electric shock danger.
Do not expose you LCD AV to rain or moisture.
Keep your LCD AV away from excessive dust, high temperatures, moisture, or direct sunlight.
Use your LCD AV in a well-ventilated area and do not cover the ventilation openings.
Do not modify your LCD AV or use an unshielded power cord or video input source cable, or
you may experience excessive interference.
Disconnect your LCD AV and unplug the power cord when the AV is not used for a long period
of time.
If the picture displayed is in any way abnormal, turn off your LCD AV, then disconnect it from
the electrical outlet. Make sure that your video input source cable is connected correctly, then
reconnect your LCD AV to the electrical outlet.
Disconnect your LCD AV from the electrical outlet before cleaning or performing maintenance.
Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for cleaning.
Do not place your LCD AV on an unstable cart, stand, or table. Your LCD AV may fall, causing
serious damage.
Important safeguards
4
Chapter 6 Safety, Regulatory and Legal Information
US Regulatory compliance statements
Your LCD AV has been tested and found to comply with the limits for a Class B digital devices,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. Your LCD AV generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instruction, may
cause harmful interference to radio communication. However, there is no guarantee that interference
with not occur in a particular installation. If your LCD AV does cause harmful interference to radio or
television reception, which can be determined by turning your LCD AV off and on, the user is
encouraged to try to correct the interference by one or more the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/AV technician for help.
Warning: Use only shielded signal cables to connect I/O devices to your LCD AV. You are cautioned
that changes or modifications not expressly approved by the party responsible for
compliance could viold your authority to operate the LCD AV.
FCC STATEMENT
This LCD AV complies with part 15 FCC Rules. Operation is subject to the following two
conditions (1) This device may not cause harmful interference. (2) This LCD AV must
accept and interference received, including interference that may cause undesired
operation.
Canada Regulatory compliance statements
This LCD AV does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the radio interference regulations of Industry Canada.
Safety Precautions
5
Warning……………………………………………………………………………………………………. 2
Important Safeguards……………………………………………………………………………………. 3
Safety Precautions……………………………………………………………………………………….. 4
Table of Contents………………………………………………………………………………………… 5
Components………………………………………………………….. …………………………………. 5
Feature……………………………………………………………………………………………………. 6
Exploring Your New Monitor…………………………………………………………………………….. 7
Function Keys Instructions for AV..…….…………………………………………………………….…. 8
I/O Connection.…..……………………………………………………………………..………………... 9
Menu Setup-IMAGE..……………………………………………………………………………….…… 10
Menu Setup-PIP…………………………………………………………………………………….…… 11
Menu Setup-SYSTEM…………………………………………………………………………………… 12
Menu Setup-VGA………………………………………………………………………………………. 13
Specifications………………………………………………………………………………………..… 14
Wall Mountable…………………...………………………………………………………………….….. 16
Dimensions…………………….. ……………………………………………………………………..…. 17
Components
(1) LCD Color Monitor 1
(2) Accessories
(A) Power cord 1
(B) User Manual 1
(C) Adapter 1
(D) PC audio cord 1
(E) VGA cord 1
Table of contents
6
1. Professional TFT LCD for surveillance.
2. Compatible with VGA(640X480), SVGA(800X600), XGA(1024X768), SXGA(1280X1024)
resolution,(SXGA for 17/19" LCD only).
3. All plastic case.
4. Video input BNC x 1 / VGA x 1 / S-Video x 1.
5. Video output BNC x 1.
6. Audio input RCA x 2 / phone jack x 1.
7. Audio speaker x 2.
8. Full / Under / Over scale mode.
9. Picture-In-Picture feature that allow multi-picture display.
10. Built-in 3D comb filter and 3D de-interlace for crispy picture performance.
11. Fast response time and refresh rate without time lagging.
12. Provides 6500°K and 9300°K color temperature se lection for user's preference.
13. Provides key lock and power memory function for easy management.
14. Cam mode control that enable auto-adjust incoming video signal level
15. Video looping Output supports 75ohm auto termination.
16. VESA standards (100mm X 100mm) bracket.
17. High brightness level and contrast ration with super wide viewing angle.
Feature
Loading...