Page 1
V1.1
User manual
Network Camera
IP321/321W IP341/341W IP 351/351W IP361/IP361W
Page 2
``
2
CONTENTS
Product Assurance ................................................................................................................. 3
Approval Information .............................................................................................................. 4
Infrared Night Vision ............................................................................................................... 9
Installation .............................................................................................................................. 10
Connecting the cameras ..................................................................................................... 10
Camera Search tool Installation & Usage ......................................................................... 10
Review Images from the Network CAMERA ............................................................................ 16
Introduction of Main page ...................................................................................................... 18
System Setting ......................................................................................................................... 20
System status ................................................................................................................... 21
Network .......................................................................................................................... 21
Local network ........................................................................................................ 21
PPPOE Account Configure ................................................................................. 23
Wireless Network .................................................................................................... 23
DDNS Settings ...................................................................................................... 25
UPnP ...................................................................................................................... 26
Camera Settings ........................................................................................................... 27
Stream Setup ........................................................................................................ 28
Night Vision Settings ............................................................................................... 30
Multi Device settings ............................................................................................ 30
Alarm Settings ............................................................................................................... 32
Motion Detection settings .................................................................................... 32
Port Alarm .............................................................................................................. 32
Alarm Management .............................................................................................. 33
Periodic Record Schedule ................................................................................... 34
Periodic sending ................................................................................................... 34
File Store ................................................................................................................ 34
SMTP ...................................................................................................................... 35
FTP ......................................................................................................................... 36
System Management ........................................................................................................... 37
Hostname .............................................................................................................. 37
User Management ........................................................................................................ 37
Time Settings ........................................................................................................ 38
Disk Management ................................................................................................. 39
Disk Management ................................................................................................. 39
Restore ................................................................................................................... 40
Firmware Update .................................................................................................. 40
Specification .................................................................................................................... 41
FAQ .................................................................................................................................. 42
Page 3
``
3
INTRODUCTION
Thank you for your interest and support in our product and purchasing this 3GPP
network camera. The camera can be accessed remotely, and controlled from any
PC/laptop over the Intranet or Internet via web browser. The user-friendly installation
procedure and intuitive web-based interface offer easy integration with your LAN
environment or WiFi system. The camera also comes with a lot of useful alarm tool for
notice user any situation. We feel confident that you will be pleased with the quality and
features of this product.
Notice
This product may cause interferences with other wireless equipment that operates at
2.4GHz ISM band. Please turn off one of the equipments to eliminate the interference.
Product Assurance
This camera will emit electromagnetic wave, just like other wireless products, but its
transmitting power is less than other wireless products such as mobile phones. The
2.4GHz wireless camera meets wireless frequency security standards and
recommended indexes while working. These standards and indexes are certificated by
academic organization and represent the cogitative research of the scientific workers
who continuously explore and annotate the involved fields. So we believe that our
products are safe for customers
Page 4
4
Approval Information
All our products meet the requirements of approval FCC or CE, and are granted the FCC or CE
certification. They are authorized to bear FCC or CE mark.
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant toPart15of the FCC ruled .These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and
radiates radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and the receiver
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
4. Consult the dealer or an experienced radio/TV technician for help
This device complies with Part15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)The device may not cause harmful interference and
(2)This device must accept any interference received, including interference that may cause
undesired operation changes and modification not expressly approved by the manufacturer or
registrant of this equipment can void your authority to operate this equipment under Federal
Communications Commissions rules.
CE
This product complies with standards including low voltage device directive 73/23/EEC,EMC
directive 89/336/EEC and R&TTE directive 1999/5/EC .It passed the subject tests by the
authority concerned and is authorized to bear CE mark.
Restrictions
1. Do NOT use this product to violate one’s privacy. Monitoring one’s activities without consent is
illegal and this product is not designed and manufactured for such purpose.
2. DO NOT put this product near any medical equipment. Radio waves might potentially cause
breakdown of electrical medical equipment.
3.This product should be placed at least 1 foot away from any heart pacemaker .Radio waves
might potentially influence heart pacemaker
4. DO NOT use this product for any illegal activities .It is the user’s responsibility to ensure that
the usage of this camera is of a legal nature
Page 5
5
Maintenance
1. Ensure that the camera and its power source have sufficient ventilation
2. Do not shake strike or drop the product
3. Keep the camera dry and dustless
4. Do not place the product near any magnetic objects
5. Avoid putting the product in places where there is constant temperature and humidity change
6. Keep the product away from heart sources
7. Do not use the camera near aggressive chemicals
8. Do not use the camera near to water
9. Do not use the camera in the places which are enclosed by metal The surrounding metal may
shield the electromagnetic waves, and result in failure of the signal reception
10. Please obey the local government’s environment protection policy
11. Please turn off the power when left unused
12. Do not disassemble or attempt to repair the camera, doing so might cause damage to the
product
Page 6
6
MAIN FEATURES
Easy Installation
The camera comes with built-in wireless (IEEE802.11B/G) capability and a web server,
therefore there is no need to install a driver .The setup CD-ROM includes the camera setup
software, user manual and quick installation guide
With industry standard automatic configuration-UPNP (Universal Plug and Play),your PC will
discover and connect to your camera automatically .Once connected ,using a simple web
browser you can see what the camera sees from anywhere in the world !
The camera can be either wall-mounted or ceiling-mounted using the supplied stand. It can
also be placed on a desktop using the supplied stand, thus providing a flexible installation
solution.
Quick Installation Guide
Connect
Camera to the
network
Connect DC Power(Wait for Power light to go green)
Connect Ethernet cable from camera to the broadband router
Run Camera
Search to find
Camera on
your network
Run CD ―autorun.exe‖ to install software on a PC connected to the
network
Select ―Tools‖ from the menu
Select ―Camera Search‖ (runs CTVS camera search Installer)
Run Camera Search Program(from the Windows desktop)
Click ―Begin Search‖ (may need to be repeated several times until the
camera is found)
Select the installed camera (high in blue)
Click ―Open device‖ and browser window to the camera will open
Configure
browser to
access camera
Install Active X (may need to change your browser security settings to
allow Active X control to be installed and enabled)
Enter user name(admin) and password(admin)
Browser window should now display the camera video window and a
left hand control panel
Configure
Camera with
network & user
settings
Click ―System Setup‖ and configure required network settings for
wireless access, remote access from the internet and mobile phones
and setting email alerts
Configuring
Wireless
Network
Access
Go to Menu: System Setup—Network—Wifi
Click ―Scanning‖
Select the wireless network you wish to use
Enter encryption and password settings(refer to your wireless
broadband router user guide)
Click ―Apply‖ the camera will reset and the Ethernet cable must be
disconnected.
When the camera restarts, you should be able to see the camera
Page 7
7
video in the browser window. If not, then recheck your wireless
network settings.
Viewing the
Camera
remotely with
UPnP
Go to Menu: System Setup—Network—UPnP
If your router supports UPnP then Enable UPnP Port forwarding
which allows camera to open ports on the router automatically so that
the video streams can be sent out from your internal network.
Get the IP and port settings from ―system setup –system status
–UPnP—Internet address
To access the camera remotely type http://ipaddress:httpPort/ in
your browser window.
Viewing the
Camera
remotely using
DDNS
Go to Menu: System Setup—Status
Note the local IP Address, http port and control Port and External IP
Address, http port and control Port.
If your router doesn’t support UPnP, you will get an IP address for the
camera that can be accessed from the internet.
You must register with a free dynamic DNS service such as DynDNS
(http://www.dyndns.com). They will assign an external hostname
that is linked to your external Hostname that is linked to your internal
IP address which you can use to access your camera from the
internet.
You must first ―port forward‖ the camera Local web port and Local
sever port for the camera Local IP address in your router
configuration(refer to your router documentation).
To access the camera remotely type.
http://hostname.dyndns.org:http web port in your browser
window.
Viewing the
camera
remotely on a
mobile phone
via RTSP over
a mobile phone
network or
via a wifi
connection
Go to Menu: System Setup—Status
Note the internet IP address, rstp Port and extension name. To
access the camera remotely from your phone type
rtsp://ipaddress:rstpport//main.mp4 in your browser window Or…
Go to Menu: System Setup—Stream Settings—Stream list
Note the Internet IP Address, rstp port and extension time. To access
the camera remotely from your phone type
rtsp://ipaddress:rtspport/mobile in your browser window
A streaming application such as RealPlayer will load and play the
video stream on your phone.
Note: some mobile operators block rtsp video streaming. In the case
you may only be able to view the camera video stream on your mobile
phone using a WIFI connection.
802.11b/g Wireless LAN Connection Available
The camera is designed to not only work with your existing wired network but also with
standard 802.11b/g wireless devices, allowing the flexibility to operate the camera wirelessly.
The camera utilizes SSID filtering. Powerful 64/128 bit WEP and new security standard WPA
encryption to protect you from illegal instruction.
Page 8
8
3GPP Mobile Surveillance
The camera provide the ability to view the cameras monitored through your mobile phone as
a live video stream, it supports the telecommunications standard of 3GPP streaming format.
All 3G Enable mobile devices and most 2G phones that support the streaming standard of
3GPP are compatible.
Simultaneous High-speed MPEG-4 and Motion JPEG
The camera allows live the MPEG-4 and Motion JPEG streams simultaneously. The camera
features MPEG-4 compression which compresses the video to make transmission faster
and more efficient. The MPEG-4 and MJPEG image can be transmitted at 30frames per
second.
Simultaneous HTTP and RTSP streaming
The camera support HTTP and RTSP/RTP/RTCP protocol, and provide multiple HTTP and
RTSP streams simultaneously
Audio Transmission
The camera comes with a built-in microphone for audio monitoring as well as video
monitoring .Sound captured by the camera is transmitted to the client’s PC
Snapshot and Recording
You can capture a still image of the camera view on your PC and save the image as JPG or
BMP format file. You also can record the video and audio captured by the camera on your
PC and save as an ASF format file.
Motion Detection Function
The camera can detect changes in the image being monitored .Once a change occurs it will
send an email to up to 3email address with a video file or snapshot attached .The video file
or snapshot can also be uploaded to an FTP server .In addition the camera can be
configured to send images at regular intervals.
OSD Function
OSD (On Screen Display) function can display system name, date and time and
user-defined on screen
Authentication
An authentication window requires you to enter the user ID and password .Password
security can prevent unregistered users from accessing your camera .Users can select
Basic Authentication Method or Digest Access Authentication method.
Multi-Client Access
The camera allows up to 6users to view simultaneously .Please note that this is possible
that as the number of simultaneously connected users to camera increases ,the overall
motion performance will decrease.
Page 9
9
Infrared Night Vision
The camera utilizes 30infrared LED to provide high in dark environment. When the environment
is dark, the LED will be opened automatically due to a photosensitive component, and the
moving images will be changed to Black and White. User can monitor clearly the things within
15meters distance. Users also can select open or close the infrared LED manually, and select
whether change the image to black and white or color automatically.
Adapter
The product conforms with the authenticated AC adapter .The adapter is marked with one
or more of the following.
Notice:
When using the power adapter, make sure the rating voltage on it is compatible with that of the
device to avoid potential damages resulting from incorrect usage of power supply .
PC System Requirements
The PC(personal Computer )and the network must meet the following technical
specifications for camera to work properly
1. Processor: Intel Pentium III, 1GHZ or Higher (Pentium IV, 2GHZ or Higher recommended)
2. RAM: 256MB or more
3. Color Monitor: Suggest at least 800x600 and the latest driver for the Display Adapter
4. OS (Operating System):Windows2000/XP/Vista
5. Web Browser: Internet Explorer version 5.0 or above, DirectX 9.0C or later
6. Network Protocol: TCP/IP network protocol installed
7. Interface: 10/100 Mbps Ethernet card/wireless Network card for your network connection
8. Other: CD-ROM Drive
Page 10
10
Installation
Connecting the cameras
Using a standard Ethernet network cable, connect the camera to your network (depending on
your own setup, this may be to your router or switch). See figure below
Connecting the adaptor with power, camera will detect automatically, and the ―power‖ status LED
will blinks. Then, Network camera will be ready to start.
Rear view of camera
Notice: Please be careful when connect the adapter to socket
Camera Search tool Installation & Usage
Camera Search tool can connect quickly to your cameras in LAN and set out them
in the window. Meanwhile, you can set up the IP address to every camera in this
software.
1. Insert the Installation CD into your CD-ROM drive and the installation screen should appear
automatically (See image below). If not, click ―autorun.exe‖ in the text.
DC5 Adapter
RJ45 network cable
Page 11
11
2. Click on ―Install Software‖ and the following screen will be displayed. And click ―Next‖ and
install:
Page 12
12
3. If you want to change the default files, click ―browse‖, otherwise click ―next‖.
4. Click ―install‖
5. Click Finish to end the installation
Page 13
13
6. You should now find an icon on the desktop.
7. Double-click the ―Camera Search‖ icon on the Desktop to launch the program. The Camera
Setup utility should automatically find your camera if is correctly connected
Page 14
14
【Search】: Click Search to search the cameras in LAN
【Setup】: Select the required camera and click Set up the network configuration
【Open】: Select the required camera and click Open to access the camera via a
web browser
【Exit】:Click Exit to exit the Camera Setup window
Notice: Select and double click to open the camera view via the web browser.
Run the “Camera Search” program to locate the newly installed network cameras
Notice: If there is no DHCP server, Network Cameras display the factory default IP
address in the search software, factory default IP address: 192.168.1.239. When there are
DHCP server in the LAN, MINI Series Network Camera will obtain IP address automatically
from the DHCP server and display in the device list with the LAN IP address. Please make
sure that IP address of net work camera is different from other devices’.
1. Run the ―Camera Search‖, program will search cameras in LAN automatically
2. Select one of the IP from the device list (the selected one show with blue), click on the
"set up" button, the following screen will be displayed.
3. 【Name】：Enter a unique name for the camera【Description】: Input description, such as
location of camera 【Http Port】: Default is 80.
―Obtain IP address automatically‖ and ―obtain DNS server address automatically‖ are default,
and also you can choose ―Use the following IP address‖ to set up by yourself. Please follow the
step 4 to 7. If you need to save default setting, you can see next page directly.
4. To obtain the IP addresses specific to your network, click ―Start‖—“Run”, then type “cmd”. A
Page 15
15
window of MS-DOS will be displayed, and then type “ipconfig/all”—press Enter, a screen
similar to the one below will be displayed.
5. Take note of the following:
IP Address
Subnet Mask
Default Gateway
DNS Servers
6. Enter the details noted in step 5, and input relevant fields. IP address should be different.
7. Input user and password, and click ―ok‖, the following screen will be displayed.
Click―OK‖ and finish.
Page 16
16
NETWORK CAMERA SCREEN AND SETUP
WINDOW
Review Images from the Network CAMERA
You can select one of the three ways to review pictures from the camera.
1. Input the assigned IP address (or URL) of the camera on the Web Browser., for example,
192.168.1.239. The below dialog will appear. Input the correct username (the default is admin, in
lowercase) and password (the default is admin, in lowercase). Choose the language (the default
is English),you are allowed to enter the picture viewing interface or the system setting interface.
The general users assigned by the administrator are not allowed to enter the system setting
interface. They
can only be permitted to enter the picture viewing interface.
2. Open ―camera search‖ Tool and double-click the relevant camera item.
Page 17
17
3. Run manage device in video client software.
Page 18
18
Introduction of Main page
When access the network camera at the first time, IE will be prompted to install the ActiveX
control. Users can install it with the following steps:
Click the highlight in blue, the following page will appear.
When you download and install the ActiveX control, refresh the page.
You will then view the following screen in your web browser.
Page 19
19
1. Multi Devices select
a) First add device in system setting, ―camera setting‖—―multi
channel setting‖
b) Select four channel or nine channel
c) Choose one camera, and then capture, record and image setup.
2. Screen Size
a) :Full screen
b) ：640*480
c) ：320*240
d) ：160*120
3. Basic Setting
a) ：mirror
b) : flip
c) ：frequency
Page 20
20
4. Image Setting
You can adjust the Brightness, Contrast, Saturation and hues of
the image, you also can restore to Default Image by Deflaut
button.
5. Press the Record button.
a) ： snapshot
b) ：Click Record, the color of the button will change to
6. The default is mute, and click “Audio” button to open the audio. Click on button and
button to adjust the volume
System Setting
From the home page click ―System Setup‖ to start the ―advanced function‖ setting. First you can
see page of status.
Page 21
21
System status
System status includes system information, such as version No, status of memory card, Ethernet
address and so on.
Network
Local network
The camera is set up to obtain the IP address automatically (DHCP) by default. Should you may
wish to assign the IP address manually, use the TCP/IP Setup page to enter the address details.
Page 22
22
―IP configure Mode‖
Obtain an IP address automatically (DHCP):
If your network supports a DHCP server (e.g. router) select this option to have the IP
address is assigned automatically.
If you select Obtain an IP address automatically you should select obtain a DNS Server
address automatically.
Manual (Static) select this option when a fixed IP is required.
If there are many cameras in LAN, we suggest that you select static IP address so that
you can manage easily.
【IP Address】Type the IP address of your camera.
【Subnet mask】Type Subnet mask
【Default Gateway】Type the default gateway.
Notice: To get IP address, you can refer to the information above or get help from your
network adminnistrator.
DNS Setting
Obtain DNS server address automatically
If your network supports a DHCP server (e.g. router) select this option to have the DNS
Server address is assigned automatically.
Manual set up DNS server addresses
Set up a preferred DNS and alternate DNS.
Port settings
Page 23
23
HTTP Port
The default is 80.
RTSP Port
The default is 554, used for video.
Control Port
The default is 28001, offer control service, such as alarm, mirror, and image setting.
Any changes of this page will lead to system reboot. Making sure all parameters correct
before clicking the ―apply‖ button.
Notice: If you need enable UPNP function or relevant port in router through external camera,
you can get help from your router manual or network adminstrator.
PPPOE Account Configure
Camera can be installed without a PC on the network.Some ADSL server support PPPOE.
PPPOE settings
【PPPOE Dial up】Enable or disable PPPoE connection.
【User name】 consult your local ISP provider.
【Password】 Input your password of ADSL
Notify user when IP address changes:
【FTP】Enabled the option, send the obtained IP address to your FTP server when
PPPOE is successful.
【SMTP】Enabled the option, send the obtained IP address to your email server
when PPPOE is successful.
Click ―save’, connect RJ45 XDSL cable to network interface of the camera and then reboot.
Wireless Network
Wireless network card supports IEEE802.11b / g wireless standards
Page 24
24
Wireless access point scanning
Search available wireless networks
Enable wireless network
Enable and disable wireless card.
SSID SSID (Service Set Identifier):
Manually type maximum 32 ACSII characters, can also choose wireless SSID
searched.
Wireless mode
Access point (infrastructure): Through the selection of access point or router.
Point to point: select when camera connection with the computer directly
Security Mode
WEP
Authentication: Select WEP Authentication mode
Page 25
25
WEP Key type: WEP 64bits or WEP 128bits
WEP Key Index: Select the WEP key type. Either in 16 hex or ACSII characters optional
WEP Key: Type the password
WPA、WPA2
WPA Agorithoms: Select TKIP or AES
WPA KEY: Type the password
Click “Apply”to save changes and finish.
Notice: These settings have to match those of your access point or router. Please consult your
access point or router manual on how to verify or modify these settings.
DDNS Settings
Dynamic DNS (DDNS) is simply a way of using a static hostname to connect to a dynamic IP address.
When connect to your ISP, you are assigned a temporary IP address. DDNS services keep track of your IP
address and route your Domain Name to that address when you wish to connect to the camera from a
remote location.
How to add and set up DDNS
Page 26
26
Enable the Dynamic DNS function
Click the Domain name server link, register domain name after account for it. ; If you
already have a dynamic domain name, you can skip this step.
Select your preferred DDNS service provider from 3322.org or Dyndns.org then click
register
Set the DDNS update time which is used to detect any changes of IP address, in order to
submit updated information to the server in time.
Enter the Domain Name details supplied by your DDNS service provider
Enter the Host Name details and password supplied by your DDNS service provider
when you registered
Click ―Apply‖ to confirm your settings.
UPnP
The camera supports the UPNP functions outside the network, it can automatically port forwarding
with your router, it is a quick way to access and discover your camera on the external network.
Please make sure that the UPNP function is enabled on your PC and make sure your router
support UPNP
function.
Enable UPnP port forwarding, and click ―save‖, you can see IP address in internet.
Page 27
27
Camera Settings
Camera Settings
OSD Timer Settings
OSD Enable: Display date and time
OSD Color: Display color of information
Audio Settings
Sample Rate: Users can select 16, 24, 32, 48 kbps to determine the quality of the audio
transmission
Click ―save‖ and finish.
Page 28
28
Stream Setup
RTSP Authentication: Eanable or disable RTSP stream authentication. You can use mobile
phone to play the mobile stream from camera, but generally mobile phone do not support
authentication, so we have to disable the RTSP authentication.
Stream List: A stream list will be shown as below after clicking the stream name such as
― PC stream‖
You can use RealPlayer, VLC Player or Quick Time Player to play the live stream from camera in
intranet or internet. You can also use mobile phone, Real player and quick time player to play the
live stream from camera. The size of video is 176 X144.
Notice：You can adjust frame rate and image quality to get a good view results when you
Page 29
29
access camera from internet.
PC Stream Setup
Bit Rate Mode: Set a fixed data bit stream
Quality Mode: Set up image quality below, and after selecting one, bit rate of date will adjust
automatically.
Quality: Medium、Standard、Good、Detailed、Excellent，Medium selected
Bit Rate: Fourteen options: 64、128、192、256、320、384、448、512、576、640、704、
768、1024、1536（kbps）
Image size: Three image resolutions available:640x480（VGA）、320x240（QVGA）、 160x120.
Frame rate: Five options: 5、10、15、20、25 frames per second (fps) .More higher, more
clearer.
Note: The above settings determine the image quality, however higher bit rates
require greater bandwidth. Please select the appropriate settings according to
your connect speed and network traffic. If you are experiencing jerky video it
may be necessary to decrease the bit rate.
Mobile Stream
The default is MJPEG, and disable, MJPEG and MPEG4 are optional. Such as I
IPHONE interview, enter IP address or dynamic domain name directly to see the picture as below
Page 30
30
Night Vision Settings
Camera has infrared LED lights, which can be opened automatically when camera check dark
environment.
Infrared light control
When the environment is dark, the LED will be opened automatically due to a photosensitive
component. Users also can select open or close the infrared LED manually.
Black and white screen mode:
When the environment is dark, the moving images will be changed to Black and White
automatically. Users can also select whether change the images to black and white or color
manually.
Click ―Save‖ to confirm your settings
Multi Device settings
Nine channels can be displayed simultaneously and be operated such as recording, snapshot
and flip.
Page 31
31
Choose relevant device.
Device name: Give the name for identifying.
IP address/Domain name: for the camera selected
RTSP Port: for the camera selected
Control port: for the camera selected
User and password: for the camera selected
Page 32
32
Alarm Settings
Motion Detection settings
If you need to use the alarm function via email, FTP server or SD card, please click the link of
Alarm Configuration, FTP Mail or Recorder setting. Also there are three motion detection areas,
area 1, area 2 and area 3 , you can choose three Areas at the same time.
Window: Three windows can be set up. And the area of the window can be changed
and adjusted.
Threshold: Control probability of alarm. MAX: Left; MIN: Right.
Sensitivity: Identify the sensitivity of change. MAX: Right; MIN: Left
After finishing the setup above, please click ―Apply‖.
Port Alarm
This page enables I/O alarm port.
To implement I/O alarm please check to enable and configure the inspection interval at the same
Page 33
33
time to check linkage to the output ports in alarm
Description of back of the device：Input ①② Output ③④
Alarm Management
Alarm Enable: Enable or disable alarm function
DO: Motion detection is transported to external alarm device, such as alarm light, alarm
whistle
Record into SD card: Alarm of motion detection is recorded into SD card. Also images can
be sent to FTP server and Email server
Recording time: Set up the length of record.
Snapshot: It means to capture images. The images can be sent to FTP server and Email
server if the two options are selected.
FTP Alarm: Images are sent to FTP server. Click ―FTP SETTINGS‖ to set up.
Refer to the following FTP Setting
Mail Alarm: Images are sent to email. Click ―SMTP SETTINGS‖ to set up.
Refer to the following SMTP Setting
Valid time: Set up alarm period. ―Always‖ or ―AS Table‖ selected.
Alarm table settings: Click ―AS Table‖ to set up.
【Every day】 Select or not
【Sunday - Saturday】Select or not
【All】Open all the time
【Between】open in the time range selected
【Beyond】 open out of the time range selected
Click ―save‖ and all finished.
Page 34
34
Periodic Record Schedule
Network camera can record the images or videos periodically.
Store Size: set up the size of store files. MAX 99MB
Valid Time: set up schedule
Periodic sending
Network camera can sent images periodically through FTP.
Intervals time: set up the interval time
Valid Time: Set up the schedule
Click ―save‖ and all finished.
File Store
Operate (download or delete) the files in SD card.
Page 35
35
File type: Select file types will be searched
Time: Set the start time and end time.
Click ―search‖, and the pictures or videos list will be displayed as following.
Click ―download‖, save as local computer
Click ―delete‖, delete the files in SD card
Click ―back‖, back to store settings.
Previous and Next: Page turns.
SMTP
Set up the sending server and receiver server.
Page 36
36
SMTP Server Number: choose one mail server from the four options in the list.
SMTP Server: Enable or Disable
Email Subject: Title of the email about alarm
Recipient: email address of receiver. Three selected
Sender: email address of sender.
SMTP Server: name or IP of server. Please get details from SMTP server or network
administrator.
SMTP Port: The default is 25.
User and password: Input the user and password of your email.
FTP
Set up files server for alarm pictures and recordings.
FTP Server Number: Choose a FTP server from the four options in the list.
FTP Server: Enable or disable
FTP Server Address: Address or IP of FTP server. Please get details from network
administrator.
FTP Port: The default is 21.
User and password: Input the user and password of your FTP server.
PASV Mode: Enable or disable
When finishing the setting above, please click ―save‖.
Page 37
37
System Management
Hostname
Hostname: Set up a name identified.
System Description: Description of place installed.
Click ―save’ and finish.
Notice: The information will displayed in search tool and milti channel client software, so that you
can identify many cameras easily.
User Management
Add a new user
Page 38
38
Input the user name
Select the appropriate permissions in the user group, Three selected.
Guest: see live video
Operator: manage settings in system
Administrator: the top authentication. Notice: admin can’t be deleted
Input ―User Name‖ and ―Password‖
Add the new user
Delete User Account
Select the account which be deleted.
Notice: The default admin can’t be deleted
Modify account password
Select username to modify, and then input old password and new password twice. Click
“MODIFY” and finish.
Time Settings
System Time: current time in camera
Synchronize with PC: current time in computer
Custom Input: Input time by yourself
Page 39
39
Time Zone Settings: select the time zone
NTP Settings:
Enable
NTP server： Input NTP time server
NTP synchronization: Select NTP synchronization period
Click ―save‖ and finish
Disk Management
Disk Management
Disk Space Check Interval: Set up disk space check interval
Full Overlay: Overlay or not, when there is least space left.
Format TF card
Notice: click ―format TF card‖, and delete all the files in TF card. Be careful!
Page 40
40
Restore
Export User Settings: Click ―Export‖, and export current settings to save
Restore User Settings: Click ―browse‖， and select a back up files, and then Click
―Restore‖ to finish.
Restore Factory Settings
Notice: You can’t turn off the electronic power while restoring user settings and restore factory
settings, otherwise, the camera will be damaged.
Tips: “Reset‖ in camera body
1. Press ―Reset‖ to reboot
2. Press ―Reset‖, and provide power aobut 15 –t 30 seconds. Restore factory settings.
Firmware Update
You can update the camera with newest firmware which is modifying the bug in the old firmware
or add some new functions.
Click ―Browse‖， select the latest firmware.
Click ―Update‖
Finish and reboot.
Notice: You can’t turn off the electronic power while updating, otherwise, camera can’t work
correctly.
Page 41
41
Outdoor Network Camera
Model
Specification
IP321W (wifi)
IP321 (wired)
IP341W(wifi)
IP341 (wired)
IP351W(wifi)
IP351 (wired)
IP361W(wifi)
IP361(wired)
Image sensor
1/3 CCD
SHARP 420TVL
1/3 CCD
SONY 420TVL
1/3 CCD
SONY 520TVL
1/4 CMOS
Lens Standard CS-mount 6MM
Pixels 410000
Infrared LED 18 LEDs ø8 16mil
Night Vision distance
Up to 50 m
AWS/AGC/AES Auto
Minimum illumination 0.01 Lux, 0 Lux
Camera
S/N ratio ≥50dB
Video compression MPEG-4 and MJPEG dual compression
Stream type HTTP;RTSP;RTP;RTCP;3GPP;MP4
Max. frame rate Max:30FPS
Video
Resolutions
PAL:176x144;352x288;720x576
NTSC:176x120;352x240;720x480
Network interface RJ-45 (10BASE-T/100BASE-TX)
WI-FI IEEE802.11b/g
Network
Supported protocols
TCP/UDP/IP/ARP/ICMP/DHCP/DNS/HTTP/FTP
/SMTP/NTP/PPPoE/UPnP/DDNS/RTSP/RTP/RTCP
Motion detection Three configurable zones for schedule motion detection
Alarm events
• Notification via email, FTP
• External output activation and input devices alarm
• Video recording to local storage
Alarm
periodic sending Send image pictures to Email/FTP within the Provides time
User Authentication Authentication: user/password; administrator/general user
Simultaneous viewers 10 viewers@352x240 4 viewers@720x480
Web browser IE 6.0 or above version, Mozilla Firefox, Safari, Opera, Chrome ,etc
Supported mobile Nokia ,Iphone ,window mobile and other smart phone
Power DC 12V 1.5A
Power consumption 4W, 6W(infrared LED on)
Operating
Temperature
-5 to +45 °C (+22 to +113 °F)
Storage temperature -20 to +60 °C (-4 to +140 °F)
Operating humidity 20～80%RH
Storage humidity 20～95%RH
Dimensions 180mm x 70mm x 70mm(D x W x H)
General
Weight 780g(main body)
Page 42
42
FAQ
If network camera can’t work, please refer to the solutions below. If the problem still exits, please
contact to reseller.
Questions Reason and solutions
Forget the IP address
Search IP Address via client software
Restore factory settings
Forget user and password
Press “Reset” in camera body for 15-30 seconds(all
the dates will be deleted)
Search tool can find, but I
can’t open the device
Please make sure that the camera has the same
network segment as computer.
No images
Check that ActiveX has been installed
Users overburden, disconnect some users
Communication delay, wait for few minutes
Can’t connect to WIFI
Please make sure that wireless SSID, key type and
password.
Weak wireless signal, relocate the camera.
Check disturbance of other wireless devices.
Abnormal color of display is
Please make sure that the display setting of computer
is 32bits.
Loading...