CCEA TRACKALPHA Series, TRACKALPHA.8.50.230, TRACKALPHA.3.50.230, TRACKALPHA.5.50.230 User Manual

User Manual

ENGLISH

230V versions

1

ENGLISH

1. Product description …………………….………………………………………… 3

2. Safety Warnings ……….…............................................................ 4

2.1 Proper use …………………………...…………………..………………….. 4

2.2 Product Safety …..…………………………………………………………. 4

2.3 Levels of risk ………………………………………………………………….. 6

3. Versions …………..………………………………………………………………… 7

4. Guide to installation ……………………………………………………………. 7

4.1 product Sizes …………………………………………………………………. 8

4.2 Clip fixing ALPHA.FX01 ……………………….…………………………. 8

4.3 Installation…………………………………..………………………………. 9

5. Plug-in …………………………..…………………………………………………….. 11

5.1 plug-in 230V with M12 …………………………………….…..…….. 11

5.3 Option for connection ………………….…………………………….. 12

6. Switch on- Switch off …………..…………………………………………….. 13

7. Solving Product troubles …………………………………………………….. 13

8. Light Source Replacement ………………………………………………… .. 13

9. Product Maintenance and Cleaning ……………………………………… 13

10. Repairing……………………………………………………………………………… 14

11. Warranty …………………………………………………………………………….. 14

12. Product Disposal …………………………………………………………………. 14

13. Technical features ……………………………………………………………… 15

14. Symbols meaning …………..…………………………………………………... 15

15. Declaration of Compliance …….……………………………………………. 16

Table of contents

Table of contents

2

ENGLISH

Product Description

1. Product Description

 Led Lighting Equipment suitable

for medium and large industrial
machine tools.

 Anodized Aluminium Structure

and aluminium colour Varnished
side plates.

 5 mm Tempered Glass Protection
 High power Led light Source
 White 5000K Light colour
 Uniform and diffused flow

illumination

 Shock-proof against small and

medium metal chips

 Resistant to vibrations
 IP 67 degree of Protection Lamp
 Viton Seal against many cooling

emulsions.

 Plug-in to 220-240V 50/60Hz

 3 variants with different lengths

 ALPHA system fastening

3

ENGLISH

Safety Warnings

2. Safety Warnings

Each lighting device TRACKALPHA
Series has been projected and
manufactured according to the
state of the art technique. It is
made of well-selected quality
materials. It is carefully tested
beginning from row materials
throughout the production
process as far as packaging
according to a manufacturing
schedule in order to guarantee a

safe and reliable product.
Nevertheless, it might cause
material damages as well as
injuries to people while it is used.

 This manual must be well-

maintained close to the
apparatus. it is integral part
of it.

 Read All the instructions and

information contents by the
manual.

 Warning indicated by the

instructions and on the
product itself must Strictly be
followed.

 Considering warnings and

safety risks, Install and use
the product only if in perfect
conditions.

 CCEA refuses any

responsibility in case of
tampering or wrong use of
the product itself .

2.1 Proper use for employment

All TRACKALPHA Lighting properly fit
for being installed inside machine
tools as well as in existing humid
environment.

2.2 Product Safety

Electrical Risks

If the product is incorrectly used, it
might cause injuries to people and
material damages to objects.

 Connection procedure must be

 Switch off power supply before

 24VDC version: Connect only to

 Pay attention that power supply

 Maintenance and reparations

Risk of explosion

Risk of explosion might occur if this
product is installed and use into
applications with high risk of
explosion. It might cause heavy
individual injuries.

carried out by a qualified
electrician.

installation, maintenance or
reparation.

safety SELV. low tension. Follow
cable polarity (see paragraph

5.3).

rated tension and frequency
answer to requirements shown
by the label stuck on the
product.

must only be carried out by
qualified electrician.

4

ENGLISH

Safety Warnings

 Do not install and use this

product where can be risk of

explosion.

Installation and safety

 Handle with care and Avoid that

the lamp can Drop even it is still

packed. Avoid the lamp can

roughly be hit. It might cause

injuries to People as well as

material damages.

 Use only original fixing

accessories available from the

producer.

 Set up properly the Fixing

accessories.

 The apparatus must be correctly

fasten using proper screws

according to the application,

place and surface where the

product is mounted.

 Periodically Check that fastening

hook have securely blocked.

Danger of dazzling by white light
source.

Avoid to stare directly at the light
source. May temporarily cause
sightless effect. This could cause
irritation, aches, damages or
accidents.

 Do not Stare directly at the light

source.

 The Device must be adjusted so

that the flow light cannot point

towards the eyes.

Danger caused by no-appropriate
Spare parts.

Non appropriate spare parts may
cause personal injuries and damages
to objects.

 Do not use spare parts that have

not approved by the
manufacturer.

Damage caused by the presence of
laser beam

The TRACKALPHA lighting is not
allowed where high power laser such
us laser cutting is operating, it may
damage the led source.

Damage because of high
temperature

To install and use this device into
environments where an existing high
working temperature exceeds the
device operating temperature, it
drastically reduces the Led lifetime as
well as cause damage to built-in
electronic components.

 Do not use this Device into

environments where the Device
operating temperature is
exceeding.

 Avoid direct solar radiation.

Danger due to reparations

To repair or take apart without
appropriate technical and electrical
knowledge of the product itself, can
cause personal injuries and damages
to objects.

5