CBM America CBM-720, CBM-730, CBM-710, CBM-750 User Manual
Manufacturer’s Name : Japan CBM Corporation
Manufacturer’s Address: CBM Bldg., 5-68-10, Nakano, Nakano-ku
Declare the Product
Product Name: Dot Matrix Printer
Model Number(s): CBM-710,720,750 Series
Conform to the following Standards:
CBM-710/720/730/750 User’s Manual
Declaration of Conformity
T okyo, 164-0001, Japan
(CBM-710R, CBM-710P, CBM-720R, CBM-720P,
CBM-750R, CBM-750P)
(S.No.9910001 ~ )
LVD: EN60950 :
EMC: EN55022 : 1994 Class B
EN50082-1 : 1992
IEC801-2 : 1991 4KV CD, 8KV AD
IEC801-3 : 1984 3V/m, 27MHz-500MHz
IEC801-4 : 1988 0.5KV Signal Line 1KV AC mains
Supplementary Information
“The product complies with the requirements of the Low Voltage Directive 73/23/EEC, 93/68/EEC and
the EMC Directive 89/336/EEC, 92/31/EEC, 93/68EEC”
Place Tokyo, Japan Signature:
Date January.1999
European Contact :
A4 :1997
Full Name : Mikio Moriya
Position: General Manager
R & D Department
Norco Declaration AB
Box 7146 S-250 07 Helsingborg, Sweden
This declaration is applied only for 230V model.
CITIZEN
CBM-710/720/730/750 User’s Manual
IMPORTANT SAFETY INSTRUCTIONS
• Read all of these instructions and save them for future reference.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
• Do not use this product near water.
• Do not place this product on an unstable cart, stand or table. The product may fall, causing
serious damage to the product.
• Slots and openings on the back or bottom of the case are provided for ventilation. To ensure
reliable operation of the product and to protect it from overheating, do not block or cover these
openings. The openings should never be blocked by placing the product on a bed, sofa, rug of
other similar surface. This product should never be placed near or over a radiator or heater. This
product should not be placed in an built-in installation unless proper ventilation is provided.
• This product should be operated from the type of power source indicated on the marking label. If
you re not sure of the type of power available, consult your dealer or local power company.
• Do not allow anything to rest on the power cord. Do not place this product where the cord will be
walked on.
• If an extension cord is used with this product, make sure that the totalof the ampere ratings of the
products plugged into the extension cord does not exceed the extension cord ampere rating. Also,
make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
• Never push objects of any kind into this product t hrough cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill liquid of any kind on the product.
• Except as explained elsewhere in this manual, do not attempt to service this product by yourself.
Opening and removing the covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks. Refer all servicing on those compartments to service
personnel.
• Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
A. When the power cord or plug is damaged orfrayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normallywhen the operating instructions are followed. Adjust
only those controls that are covered be the operating instructions since improper adjustment of
other controls may result in damageand will often require extensive work by a qualified
technician to restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinctchange in performance, indicating a need for service.
CITIZEN
CBM-710/720/730/750 User’s Manual
IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct the interference.
CAUTION: Use shielded cable for this equipment.
Sicherheitshinweis
Die Steckdose zum Anschluß dieses Druckers muß nahe dem Grät angebracht und leicht zugänglich
sein.
For Uses in Canada
This digital apparatus does not exceed the class a limits for radio noise emissions from digital,
apparatus, as set out in the radio interference regulations of the Canadian department of
communications.
Pour L’utilisateurs Canadiens
Cet appareil numerique ne depasse pas les limites de caregorie a pour les emissions de bruit radio
emanant d’appareils numeriques, tel que prévu dans les reglements sur l’interference radio du
department Canadien des communications.
CITIZEN
CBM-710/720/730/750 User’s Manual
CONTENTS
1. INTRODUCTION..................................................................................................................................................1
1. 1 Features.............................................................................................................................................1
1.2 Accessories .......................................................................................................................................1
2. TYPE CLASSIFICATIONS.................................................................................................................................2
3. SPECIFICATIONS................................................................................................................................................3
3.1 General Specifications ......................................................................................................................3
3.2 Print Format ......................................................................................................................................5
3.3 Paper Specifications..........................................................................................................................5
4. BLOCK DIAGRAM..............................................................................................................................................6
5. EXTERNAL APPEARANCEAND PARS DESCRIPTIONS...........................................................................7
5.1 CBM-710 External Appearance........................................................................................................7
5.2 CBM-720 External Appearance........................................................................................................8
5.3 CBM-730 External Appearance........................................................................................................9
5.4 CBM-750 External Appearance......................................................................................................10
5. 5 Part Descriptions.............................................................................................................................11
6. OPERATION .......................................................................................................................................................12
6. 1 Settingand Removing the Paper and Ribbon Covers .....................................................................12
6.2 Opening and Closing theCutter Unit (CBM-720. CBM-750)........................................................13
6.3 Installing the Cassette Ribbon.........................................................................................................14
6.4 Installing and Changing the Paper ..................................................................................................15
6.5 Self Print Function..........................................................................................................................18
6.6 Paper End Detector .........................................................................................................................18
6.7 Installation of the CBM-750 ...........................................................................................................19
7. INPUT BUFFER BACK-UP FUNCTION.........................................................................................................20
7.1 Input Buffer Back-up......................................................................................................................20
7.2 Clearing the Input Buffer ................................................................................................................20
8. PARALLEL INTERFACE .................................................................................................................................21
8.1 Specifications..................................................................................................................................21
8.2 Connector Pin Assignment..............................................................................................................21
8.3 Description of Input/Output Signals ...............................................................................................22
CITIZEN
CBM-710/720/730/750 User’s Manual
9. SERIAL INTERFACE........................................................................................................................................25
9.1 Specifications..................................................................................................................................25
9.2 Connector Pin Assignment..............................................................................................................26
9.3 Description of Input/Output Signals ...............................................................................................27
10. FUNCTION SELECTION...............................................................................................................................32
11. PRINT CONTROL FUNCTIONS....................................................................................................................35
11.1 Control Codes .................................................................................................................................35
11.2 Input Data Formats..........................................................................................................................36
12. CHARACTER CODE TABLES.......................................................................................................................44
13. MAINTENANCE...............................................................................................................................................46
13.1 Maintenance Procedures .................................................................................................................46
14. EXTERNAL DIMENSIONS.............................................................................................................................47
14.1 CBM-710........................................................................................................................................47
14.2 CBM-720........................................................................................................................................48
14.3 Paper Winder Unit AW-2 ...............................................................................................................49
14.4 CBM-730........................................................................................................................................50
14.5 CBM-750........................................................................................................................................51
ATTENTION:PleaseRESETtheprintertocleartheinputbufferbefore gettingstarted.(Ref.toChapter7-2)
CITIZEN
CBM-710/720/730/750 User’s Manual
1. INTRODUCTION
The CBM-710, CBM-720, CBM-730 and CBM-750 are dot impact printers which can be utilized for a wide
range of applications, such as data communications terminals, ECR terminals and kitchen printers. High speed
performance is made possible by a bidirectional printing system and, since these printers are compact, lightweight
and equipped with an abundance of functions, they can be easily employed for a variety of different tasks.
The CBM-720 and CBM-750 have a built-in automatic cutter capable of performing a partial cut (three
connecting points remaining) or full cut (one connecting point remaining), which can be controlled through printer
command codes.
Before using your printer, please read this manual carefully to be certain you have an adequate understanding of
its operation.
1. 1 Features
(1) Deskto pcompact dot impact printer
(2) HighSpeedPrinting (Bidirectional Printing System)
(3) Built-in AutoCutter (Partial Cut/Full Cut) (CBM-720 andCBM-750)
(4) Black & Red 2 Color Printing or All Black Printing
(5) Paper End Detection Function
(6) Input Buffer Back-up Function
(7) Low Power Consumption
1.2 Accessories
Paper Roll (1 pc) - CBM-710, CBM-720, CBM-750
Cassette Ribbon (1 pc)
Base Stoppers (2 pcs) - CBM-750
Hanger (1 pc) - CBM-750
Screws (2 pcs) - CBM-750
1 CITIZEN
2. TYPE CLASSIF ICATIONS
Printer types are classified according to the system shown below.
CBM-710/720/730/750 User’s Manual
Model
CBM-710
CBM-720
CBM-730
CBM-750
Column capacity
23: 23 columns
28: 28 columns
40: 40 columns
Interface
P : Parallel type P
R : Serial type R
RS-232C
20mA Current loop
X : RS422A
23
CBM-710
CBM-720
CBM-730
CBM-750
CBM-710 – 23 R J 100 G – B – V
28
40
↑↑↑↑↑↑
↑↑↑↑↑↑
↑↑↑↑↑↑
O
R
X
J
100
F
115
230
G
C
B
N
Validation Function
V : With Validation
No symbol : Without Validation
Memory Back-up
B : With Back-up
N : Without Back-up
Mode
G : Graphic
C : Character
I : Character (Type II)
Power Source
100 : AC 100V
115 : AC 115V
230 : AC 230V
V
–
–
–
–
Character set
J : Japanese
F : International
The exclusive paper windermechanism (Model AW -2) is available separately. This mechanism can be mounted on
any of the printer types, excep tCBM-710, 720.
2 CITIZEN
3. SPECIFICATIONS
3.1 General Specifications
Item CBM-710, 730 CBM-720, 750
1 Print Method Bidirectional serial dot impact method
CBM-710/720/730/750 User’s Manual
2 Character comp osition
3 Character number per line
4 Print speed
5 Character size
6 Lin epitch
7 Paper size
8 Interface
7 × 7 dots (1ncl. half-dots)
23 columns: 230 dot/line
28 columns: 280 dot/line
40 columns: 360 dot/line
23 columns: approx.4.0 line/sec.
28 columns: approx. 3.5 line/sec.
40 columns: approx. 3.0 line/sec.
23 columns: 1.8(W) × 2.4 (H) mm
28 columns: 1.5(W) × 2.4 (H) mm
40 columns: 1.36(W) × 2.4 (H) mm
C: Character Type: 4.23 mm(1/6 inch)
G: Graphic Type: 2.82 mm(1/9 inch)
FrictionType: 76.0 ~ 0.5 mm(W) ×80 mm(Dia.)
3.0 inch (W) × 3.0 inch (Dia.)
Pin Wheel Type: 76 ~ 89 mm (W)
3 ~ 3.5 inch(W)
P: Parallel interface (8 Bit)
R: Serial interface (RS232C, 20 mAcurrent loop)
X: Serial interface (RS422A)*
2
9 Input buffer 7K bytes or 2 line buffer
N Type: Without back-up.
10 Input buffer back-up
11 Paper end detection
B Type: Duration of back-up: More than 100 hours.
(But after 10 minutes operation)
When paper is near the end, the buzzer actuates and print operation is
interrupted, or PE signal is issued.
3 CITIZEN
CBM-710/720/730/750 User’s Manual
Item CBM-710, 730 CBM-720, 750
12 ValidationPrint Available only for V-Type (1 line print)
13 Auto cutter Without cutter With cutter Partial cut/Full cut*
14 Cassette ribbon Two color (Black and Red) print IR-61R/B*
4
15 Paper winder Model AW-2 available as option.
100V ± 10%, 50/60 Hz (For Japan)
115V ± 10%. 60 Hz (For United States)
16 Power voltage*
5
230V ± 10%, 50/60Hz (For Europe)
17 Power consump. Approx. 30W
18 Operationtemp. & humidity
5° to 35°C / 41° to 95°F
10% to 85% RH
19 Storage temp. -20° to 70°C
20 Net weight
Approx. 3.1 kg (710)
Approx. 3.3 kg (730)
Approx. 3.3 kg (720)
Approx. 3.6 kg (750)
21 External dimensions Refer to Section 14.
3
Notes: *l Paper weight of 45 kg refers to 1,000 sheets of 788 × 1,091 mm.
*2 RS-422A interface specifications are not included in thismanual
1. With the RS422A type interface, only a one line input buffer can l selected.
2. However, when the input buffer is set for two lines, back-up of graph data is not possible.
*3 Partial cut is three connecting points remaining. Full cut is one connecting point remaining.
*4 Single color print ribbon is available as option.
Black print: IR-61B
Purple print: IR-61P
V Type: Use only single color print ribbon.
*5 Power voltage setting is performed at the factory.
4 CITIZEN
3.2 Print Format
(
)
(1) Character Font 7 × 7dot.
CBM-710/720/730/750 User’s Manual
23 columns: W = Approx. 1.8 mm
28 columns: W = Approx. 1.5 mm
7×7 dots
Incl. half-dots
40 columns: W = Approx. 1.36 mm
7×7 dots (Incl. half-dots)
3.3 Paper Specifications
(1) Form Friction specification :
Roll paper
76 - 0.5 mm(Width) × 80 mm (Outer dia.)
Pin wheel specification:
Fan fold paper
Width 76 mm (3 inches) ~ 89mm (3.5 inches)
(2) Type High quality paper with smooth surface
(3) Recommended Paper (Single paper) 45 - 55 kg/1000 sheets/1091 × 788 mm
(Copy) Non-carbon paper
Friction specification:
Original 1 + Copy 1, Each 34 kg paper
Total thickness: 0.13 mm or less
Pin wheel specification:
Original 1 + Copy 2
Use only single color print ribbon
Total thickness: 0.2 mm or less
5 CITIZEN
4. BLOCK DIAGRAM
CBM-710/720/730/750 User’s Manual
6 CITIZEN
CBM-710/720/730/750 User’s Manual
5. EXTERNAL APP E ARANCE AND PARS DESCRIPTIONS
5.1 CBM-710 External Appearance
Fig. 1 Front View
Fig. 2 Rear View
7 CITIZEN
5.2 CBM-720 External Appearance
CBM-710/720/730/750 User’s Manual
Fig. 3 Front View
Fig. 4 Rear View
8 CITIZEN
5.3 CBM-730 External Appearance
CBM-710/720/730/750 User’s Manual
Fig. 5 Front View
Fig. 6 Rear View
9 CITIZEN
5.4 CBM-750 External Appearance
CBM-710/720/730/750 User’s Manual
Fig. 7 Front View
Fig. 9 Rear View
10 CITIZEN
CBM-710/720/730/750 User’s Manual
5. 5 Part Descriptions
(1) Power Cord Attach the connector end to the printer inlet, and insert the plug end into an electric
outlet.
(2) Inlet This is the electric power inlet. Attach the connector end of the power cord here.
(3 ) Power Switch Power is suppliedto the printer by turning this switch on.
(4) Line Switch When this switch is pressed, the printer enters select (on line) status. When pressed
again, the printer enters deselect (off line) status. This switch is also used when
clearing an alarm condition.
(5) LF Switch Paper feeding is performed when this switch is pressed (in deselect status only).
This is used when inserting the paper and for spacing up etc.
(6) Power Lamp This lights up when the power switch is "on" and goes out when turned "off".
(7) On Line Lamp This lights up when the printer is in select (on line) status, and goes out when in
deselect (off line) status. Printing operation is performed only when this lamp is on.
(8) Alarm Lamp This lights up when printer operation is abnormal. When in an alarm condition,
printing and line feed operations are not performed.
(9) Interface Connector Connects through a cable to a computer etc. Please be certain that power to both
the printer and the computer are turned off when connection is made.
(l0) Connector Cover Covers the connector which is used for the paper winder mechanism (AW-2).
(l1) Paper Cover Opens when replacing the paper roll.
(l2) Ribbon Cover Opens when replacing the ribbon.
(l3) TopCase
(l4) Bottom Plate
(l5) Printer Cover
(l6) Paper-Feed Knob
(l7) Bottom Base
(l8) Base Stoppers
11 CITIZEN
CBM-710/720/730/750 User’s Manual
6. OPERATION
6. 1 Setting and Removing the Paper and Ribbon Covers
1) To open, grasp the sections of the cover with both hands and lift upward.
2) In order to replace the cover, engage the hook section in the middle and press downward in the direction of the
arrow.
Fig. 9 Fig. 10
3) To open the CBM-750's printer cover, grasp the (lines-engraved) section with both hands and lift upward.
4) For replacing the cover of the CBM-750, set 4 pieces of rear hooks into each square hole of the main unit, as
shown in figure 10.
12 CITIZEN
Loading...